No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Soda
Comentado en los Estados Unidos el 17 de noviembre de 2024
Easy to assemble if you have eyes, a brain, and a multimeter. It was fun to see the tubes come alive once everything was plugged in. Tubes were not 100% matched but for $17, I could care less, plus, such tubes are inexpensive, abundant and can easily be replaced. The kit could benefit from some more heat shrink tubing and a better translation of the instructions, but was easy to assemble and worked correctly.IMPORTANT POINTS:- Pins 6 and 8 of the tubes output 280V but remain unconnected. To avoid shocks and short circuits, remove these pins from both of the ceramic tube holders by flattening the little retaining tab with some pliers and pushing them out.- The kit does not come with a power supply, and the recommended supply board does not output the necessary 6.3V to drive the heating filaments. I ended up buying "Acxico High Voltage DC Converter Nixie&Magic Eye Tube HV Power Supply Module 250V/6.3V" for the power supply instead. Worked fine and comes with a barrel jack compatible with any generic 12V wall wart.
Fritz
Comentado en los Estados Unidos el 25 de junio de 2023
The kit is easy to build and requires no modifications to work. All the parts were there and except for the dead tube they all functioned.I waited to build this kit and missed the return window. One of the tubes was bad. It's not the build or tuning. The good tube works in both sockets and the bad tube fails in both sockets. I contacted the seller and they wouldn't help. They wouldn’t warranty the kit, replace the tube or sell me a new tube. I had to go to another vendor to get a replacement. Customer service ruined an otherwise great product experience. The kit is worth the chance of a bad tube just don't make my mistake, build it before the return window closes.UPDATE: I Purchased a new set of tubes from another seller on Amazon. The unit now works great!
Jeff Saint Weston
Comentado en los Estados Unidos el 8 de abril de 2023
No se pudo cargar el contenido.
Customer
Comentado en los Estados Unidos el 4 de enero de 2022
This is a really great kit to build and operate. It contained all of the correct parts and worked 100% after assembly. We purchased the green high voltage board and adjusted it to 250v before connecting it to the main board of this kit. For the price, you can't beat this kit. We will probably remove the screw terminals and solder the wires directly to the board for a permanent setup. The screw terminals are not great, but certainly work for initial setup and testing. The displays are bright and a blast to watch!
Doug H
Comentado en los Estados Unidos el 19 de noviembre de 2021
Outstanding quality kit! The board is very well done. Very easy to read for installing the components. All of the parts are of great quality and everything was there. Instructions were clear and easily understood, worked perfect on the first try!!!
Productos recomendados
Mex $194.00
Mex $ 97 .00 Mex $97.00
Mex $404.00
Mex $ 189 .00 Mex $189.00
Mex $474.00
Mex $ 237 .00 Mex $237.00
Mex $173.33
Mex $ 100 .00 Mex $100.00