No hay artículos en el carro
No hay artículos en el carrojabowery
Comentado en los Estados Unidos el 19 de julio de 2024
This listing should tell customers to purchase an old used laptop. I'm not being sarcastic. This is the truth.Don't listen to the other reviews. This is worse than worthless without the instruction to buy an older laptop. Why? Because despite what you will find all over the web about how to install the drivers, including Microsoft itself, it can't be done without an old laptop and you'll just be wasting your time and have several hours of frustration thinking you're doing something wrong when you aren't. They are by not telling you to buy an old laptop to run this system. The software can't be installed on a new laptop. It can only be installed on an old laptop. Understand? Got it?
Chuck D. Bones
Comentado en los Estados Unidos el 20 de marzo de 2023
The Good:Attractive priceScope section worked fairly wellThe Bad:Function Gen output freq was always 1/2 the commanded freqThe Ugly:Reported the problem to Hantek service. Slow response. Eventually Hantek provided a firmware update. The update tool appeared to run ok, said it successfully updated the firmware. From that point onward, the PC scope software did not recognize the scope. Reported the problem to Hantek service. They sent a different firmware update tool. The drivers would not install on my PC. No further help from Hantek. Amazon declined to accept a return as the 30-day window had expired by then. Contacted the vendor (TestingVillage) who agreed to accept the return and issued a refund. As far as I can tell, there is no manufacturer warranty.Update:After I received my refund, I ordered another unit from TestingVillage. It arrived promptly, but poorly packaged. The product box was loose inside an Amazon plastic bag. No padding. The box appeared undamaged, but when I unpacked the unit, it rattled. Sounded like a heatsink had come loose and was banging around inside. Don't know how or when the damage happened. I immediately packed it back up and returned it for refund.At this point, a sane person might conclude that buying a 3rd 6254BD would also end in disappointment. I decided to roll the dice once more and ordered another one, this time from the Hantek store. Price is $3 higher and it's shipped directly from the factory in China, but if it's packed properly it might just show up intact. Stay tuned...
Joshua Kast
Comentado en los Estados Unidos el 9 de marzo de 2021
This is not to be compared with a $20,000 Keysight unit, but for hobby or light use on the service benchtop, it is quite useful. I don't like additional devices/instruments cluttering my desk - so I'd much prefer to have a window in a monitor.The software bundled with the scope generally serves its purpose. The trace on the screen updates very quickly, with very little "lag" between the hardware scope and the visible trace. There's a few quirks. For example, creating a marker ("cursor") lets you view the voltage/time information, but this appears on the status-bar instead of in the reticule display. You have to just go through the menus, to see what all the functions are, because they don't always live in the expected location.The decoding function (accessed from the "trigger" selection), is generally effective: I tested it on UART and I2C.Hardware: we have to be realistic about the capability of this oscilloscope. At maximum sampling rate of 1.25 GHz (on only one channel), this is only 5 points per waveform cycle at 250 MHz - the rated frequency of the oscilloscope. Realistically, this is only enough to say "yes, there is a waveform" and to count the frequency: not to do so much detailed analysis. For square waves, the realistic maximum usable frequency is closer to 10 MHz. Again, you can view a data signal at this level, maybe even decode the bits, but not visualize the exact pulse edges. Your waveform probably has to be closer to 1 MHz to see this level of detail.The function generator is a nice additional feature. The stated maximum frequency is 75 MHz, but the waveform does not look great on this frequency. Since this is my only oscilloscope at the moment, I cannot tell if this is the waveform or oscilloscope at issue. Maximum amplitude is 3.5 Vpp, and multiple waveform types are supported.If you intend to automate acquisiton on this oscilloscope, keep in mind that you will be in for some work. The "OpenHantek" does not support this model yet (with no timeframe for support). Provided with the oscilloscope software is an SDK, with .dll files and libraries written for MS Visual C++. The documentation for this is not great, so you will need to have a good grasp on C++ in order to decipher their example codes and create a working application. There does not appear to be any support for Linux at this moment.
Rodolfo
Comentado en los Estados Unidos el 7 de mayo de 2019
We have contact the support team and received all the instructions need + a new firmware with a lot of new funcionalities - for free!It works fine and have a very good cost/benefit relation.
christopher smith
Comentado en los Estados Unidos el 28 de noviembre de 2018
For the amount of money, you get a good reliable scope. This my second Hantek USB scope.
Productos recomendados
Mex $213.00
Mex $ 106 .00 Mex $106.00
Mex $239.00
Mex $ 141 .00 Mex $141.00
Mex $11,150.00
Mex $ 1,881 .00 Mex $1,881.00
Mex $2,999.99
Mex $ 1,259 .00 Mex $1,259.00
Mex $1,996.00
Mex $ 818 .00 Mex $818.00