No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Acerca de la entrada del cable de alimentación ABN, entrada de bloqueo de 30 A con cubierta reemplazable
Para una conexión de alimentación segura y desmontable directamente en su aplicación al aire libre, instale el kit completo de entrada de cable de alimentación ABN 30A.
Contenido del paquete:
(1) Entrada de alimentación tradicional de acero inoxidable con una tapa de junta (1) cubierta protectora de enchufe (1) anillo
Una mirada más cercana
Mantén un sello resistente a la intemperie
Reemplaza el extremo de tu cable de alimentación existente y mantén un sello impermeable para tu RV o aplicación marina al aire libre.
PARA ENTORNOS MARINOS DUROS
La entrada está hecha de plástico resistente a la corrosión y acero inoxidable, la cubierta está hecha de goma y un anillo de plástico, y el conector es de plástico duro para añadir resistencia adicional y longevidad necesaria para entornos marinos agresivos.
Fácil de instalar
Instrucciones incluidas para la nueva instalación y ajuste existente (accesorios de instalación no incluidos). La entrada cuadrada es de 30 A, 125 V, y bloquea rápidamente el cable a la entrada.
Quiénes somos
Auto Body Now es una empresa familiar con sede en Dakota del Sur. Tenemos una presencia excepcionalmente fuerte en Internet, enviando más de 50.000 productos cada mes. De hecho, si usted ha comprado cualquiera de sus suministros de carrocería del automóvil o suministros de cuidado del coche en línea, hay una buena posibilidad de que hayamos tenido la oportunidad de servirle.
DaCajun
Comentado en los Estados Unidos el 31 de mayo de 2024
I used this to replace the OEM set up that had the power cord fed thru a small access door.
Daniel MacKenzie
Comentado en los Estados Unidos el 3 de abril de 2024
Easy to install and the cord end was also easy to install
Mike
Comentado en los Estados Unidos el 13 de junio de 2023
If you're the type that reads directions, be VERY CAREFUL when assembling the cord end receptacle. The image in Figure 2 is WRONG. The image indicates the neutral (White) wire in the wrong location. (see my pic)Otherwise, this is pretty nice. Others have noted that it's VERY difficult to put the outer watertight cover in place and they are definitely right! Even when heating with a hair dryer the cover is extremely difficult to put in place.There's yet another problem and that's with the Amazon page description of items needed. The description indicates, as of this writing, that a 2.5 inch hole saw is needed. Instead, it should indicate at least a 2.8 inch saw (which would be a tight fit) or even better a 2.9 or 3.0 inch hole saw should be used. (see the other pic)After all that, I'd definitely recommend the item. I don't know how long they'll last in the elements (if they're safe for exposure to the sun) but it fit my needs exactly. I'm using it for adding temporary power to a shipping container converted to household storage. It gets dark in there :)
JOSE LUIS CASTILLO VILLALVAZO
Comentado en México el 13 de mayo de 2022
Producto completo para realizar instalación
Customer
Comentado en los Estados Unidos el 4 de septiembre de 2022
It was easy to install and price was much better than the price at the RV companies.
Customer
Comentado en Canadá el 6 de julio de 2020
I was looking for an adapter for our RV. I have yet to install it, but don't anticipate any problems. I would suggest the product details include the dimensions of the cutout required. (In my case 30A connector requires 2 7/8" cutout.) Basically, my questions were answered by the installation instructions included in the order. I would've felt more comfortable placing my order if the install instructions were available here.Also, it's not clear in the product images how the rubber boot is to be used/installed. The photos show the boot fitted to the female side of the plug, and, in reality, if you intend to use the boot, it'll need to be installed on the cable side of the plug.[Update] Added photo of finished installation. I read a review that used Dawn dish soap to help install the rubber boot. I used a heat gun to warm up the boot, and this worked for me. I noticed it's easy to cross-thread the rubber boot screw on, so be sure threads are aligned properly during hand-tightening.I wanted to keep using the original power cord storage space, so I installed a larger baggage door (18"x11") where the original power door hatch used to be.
Productos recomendados
Mex $782.54
Mex $ 375 .00 Mex $375.00
Marinco CA3FST-A CLS Tipo de leva, adaptadores montados suaves 3Fer, macho-hembra-hembra), negro (A)
Mex $4,447.83
Mex $ 1,881 .00 Mex $1,881.00
Mex $1,337.07
Mex $ 655 .00 Mex $655.00
Mex $838.71
Mex $ 436 .00 Mex $436.00
Mex $1,454.79
Mex $ 654 .00 Mex $654.00
Mex $4,048.13
Mex $ 1,881 .00 Mex $1,881.00
Marinco 6369 CR 125/250 V 50 Amp Negro Nylon NEMA 5-15 3 Pole, 4-wire Dockside Receptáculo Eléctrico
Mex $3,426.23
Mex $ 1,507 .00 Mex $1,507.00