No hay artículos en el carro
No hay artículos en el carro Válvula de bola
Install the fill valve correctly, to ensure that the fill valve works normally:
Step 1: Put the filling nozzle through the filling hole on tank side. Be sure that the float is not attached with tank side and the fill valve could not be askew. Then replace the plastic washer and lock nut and screw the lock nut tightly.
Step 2: Connect the filling nozzle with water supply hose, screw the hose nut tightly. Then turn on the angle valve to check if water leaks from the connection of hose nut and filling nozzle. If leaks, release the water supply hose and connect again.
Water level adjustment and fill valve maintenance:
Adjust the float, to set up working water level, to get beat flush performance and save water at the same time. Clean the filter.
Widely used: Adjustable sink float valve is suitable for ponds, small water tanks, toilet water tanks, household water purifiers, pools, aquariums, aquaculture, reservoirs, industrial and large water tanks, etc. If you want to achieve automatic water replenishment and water cut-off, this project can help do it.
Mex $239.00
Mex $ 131 .00 Mex $131.00
Mex $159.00
Mex $ 87 .00 Mex $87.00