Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Botella de agua de hidrógeno, generador de botellas de agua de hidrógeno con tecnología SPE/PEM y visualización LED, máquina ionizadora de agua de hidrógeno para oficina, hogar, viajes, regalo (rojo)

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,200.00

Mex $ 576 .00 Mex $576.00

En stock

1.Color:Rojo -


Acerca de este artículo

  • Mejora la calidad del agua: la botella de agua de hidrógeno Ansvent aprovecha la tecnología avanzada SPE/PEM para generar rápidamente hasta 2000-3000 ppb de hidrógeno, separando y liberando H2, lo que ayuda a que el agua potable ordinaria se convierta en agua alcalina. El oxígeno y otros subproductos por electrólisis se separan por membranas de protones y se descargan del orificio de escape inferior.
  • Fácil de usar y portátil: simplemente mantén presionado el botón de encendido durante 3 a 5 segundos para comenzar. Su naturaleza portátil garantiza que puedas disfrutar de agua rica en hidrógeno en cualquier momento y en cualquier lugar, haciendo que la botella de agua de hidrógeno sea fácil de transportar. Utiliza la botella de agua de hidrógeno Ansvent para mejorar tu bienestar general, mejorar tu sistema inmunológico y mejorar la salud de tu piel con cada sorbo. Para garantizar la calidad del agua, se recomienda beber el agua de hidrógeno lo antes posible después de la electrólisis.
  • Electrólisis de dos modos: esta botella de agua de iones ofrece dos modos para adaptarse a tus necesidades de hidratación, toque una vez para una actualización rápida de 5 minutos con agua rica en hidrógeno. Toca de nuevo para una sesión más profunda de 10 minutos con hasta más de 3000 ppb de concentración de hidrógeno.
  • Material de grado alimenticio: hecha de aleación de aluminio de alta calidad y material de policarbonato de grado alimenticio, utilizando técnicas de pulido y molienda, la botella de agua de hidrógeno siente comodidad en la mano y no deja huellas dactilares, además, garantiza seguridad y fiabilidad al mismo tiempo. La tapa del generador portátil de agua de hidrógeno tiene un diseño cerrado y un anillo de sellado grueso, que proporciona un sellado fuerte.
  • Regalo ideal para el día del padre: empaquetada en una caja de regalo bellamente elaborada, esta excepcional botella de agua de hidrógeno irradia elegancia y sofisticación, por lo que es un regalo ideal para tus queridos amigos y familiares. Si tienes alguna pregunta, no dudes en ponerte en contacto con nosotros. Haríamos todo lo posible para ayudarte y garantizar tu satisfacción.
  • Consejos y notas: para proteger la membrana de protones mantenemos una pequeña cantidad de agua purificada dentro del producto durante el envío. Ten la seguridad de que esta presencia de agua no indica un producto usado. Enjuaga o limpia el producto con agua antes de usar. No utilices agua por encima de 60 grados Celsius y no añadas bebidas que no sean agua mineral o agua purificada (agua salada, jugo, leche de soja, cerveza, etc.) en la botella.



Descripción del producto

botella de agua de hidrógeno
generador de botella de agua de hidrógeno
botella generadora de agua de hidrógeno
agua hidrógeno
botella de agua de hidrógeno de
ionzer hidrógeno botella de agua

jerry fries
Comentado en los Estados Unidos el 17 de enero de 2025
I’ve had this for a few months and the battery last a short time now . Wouldn’t buy this brand again
Mike H.
Comentado en los Estados Unidos el 8 de agosto de 2024
Good product on initial use. Tested and no chlorine production which shows the correct SPE/PEM technology over some that list falsely. Button is a little hard to press to activate. Also would be nice to have a max fill line. Had to measure to see where it lines up to make sure to not over fill. Says 9.5oz capacity on listing and 280 on instructions. Also wary of DuPont membrane with possible long term contaminates.
Ian Gomez
Comentado en los Estados Unidos el 6 de diciembre de 2024
No se puede precionar el boton no sirve y no genera hidrogeno , mala calidad.
wizardofozone
Comentado en los Estados Unidos el 2 de noviembre de 2024
The yellow plug is holding in the few drops of water the factory adds to keep one of the filters wet at all times. You will have no action at all until you dig out that yellow plug. After each use remember to put a little water back in to cover the screen. If your unit leaks at the bottom lik a sieve, understand that tightening the bottom red base is NOT the cause of the leak, its the bottom threads that are leaking.Unscrew the bottom red base and note the empty groove around the threads. either use a lot of silicone thread wrap till you can feel how much tighter the base is as you try to line the base square to the water bottle. Easier way is to fit a round rubber gasket into the trench that is surrounding those threads. If done right there will not be a single drop leak from that bottom bottle thread. Last is my comment that all the people that claim there is no mention of a fill line never imo opened the operation instructions. there is a huge picture of the water line which is simply to stop when the water is at the base of the top threads.
rb
Comentado en los Estados Unidos el 25 de octubre de 2024
This came packaged very nicely and overall it is nice but very small. The instructions are not the easiest to navigate but overall the actual operation is pretty easy except for the fill line which doesn't exist on here. To be perfectly honest I don't feel any different drinking this water and the small quantity does not make it convenient for it to be the only water bottle i keep with me. Everything seems to work fine with the bottle but don't know that I would get again.
Productos recomendados