Hasta ahorita todo bien solo se programo el control y listo

They are great price, and getting the keys cut, one chipped and could not be used. The key cutter said it was a lower quality metal - so that is a risk you take.But one of the keys was successfully cut, and the keys feel nice on the fingers to use.The key fobs are great - they feel great, both easy to program, and easy to use blindly as opposed to the last key fob I bought. If all you need these for are the key fobs, it's a no brainer.

work great on my 2006 Altima. Locksmith cost $120 to program. They would have charged $10 just for 1 key never mind the fob.conpared to having a dealer do it at $500. it took locksmith less than half hour to cut key,program keys and program each fob.Works great. Includes batteries which I had purchased for $11 2 batterirs which i did not need.

Liked how easy to program the fobs was completed in a few minutes. Not their issue but hate how not so easy or cheap to cut and program key. Remotes are great quality and value.

Works like oem

Muy buen artículo fácil de cincronizar

Product just as described and works 100% flawlessly. Here is what you need to do to program the fob and insure the ignition key will be operable and start your vehicle.You can do this several ways. Take them to your local manufacturers dealer, call a mobile car lock company, call a locksmith, or DIY. In hind site just calling the on site mobile key company would have been the simplest and just as cost effective. They would have programmed keys, fobs, and cut keys for the same price. Who knee? Any way this is what I did;1) I took the keys to my local Home Depot which cut the 2 keys for $0.00. Yes free! Any hardware store locksmith or on site mobile key company can do this for you as well I'm sure. HD just happened to be 5min away and it was 9pm. I locked and unlocked the door and verified it turned the ignition to AC before leaving. At this point I have 2 keys cut but they will not start the ignition because the key has a chip which we will address in step 3.2) Programming the fob for my 2006 nissan was easy. Search you tube for your model but for me this is what I did.You must have at least 1 of your existing working keys in order to start this process. Note, have all key fobs with you that you want to program (max 4 at one time I think)To start;a) unlock your car door with your origional working key and sit in driver seat.b) close the door and press the door lock button. Place the new fobs either on the dash or seat next to you for easy access. At this point with door locked and keys accessible your ready to startc) Insert your current working key into the ignition and remove. Do this repeatedly until the hazard lights flash. (at least 6 times) I did this 39 times till the hazards flashed for me so just insert and remove till hazards flash.d) once the hazards flash insert the key and turn the ignition to the accessory position and press any button on your origional key fob (I used the lock button on the origional fob) the hazards should flash again. At this point the fob is programmed and you are ready to program any additional key fobs.e) with step above performed press your drivers door panel unlock button, and then lock button, and any button on your new key fob. Repeat this step for additional fobs you wish to program. (4 was the max for me I believe.)f) once you have programmed your fobs in step e turn the ignition to off, remove the key, press the unlock button on the drivers door, open the door, and then close the door to exit programming mode. At this point you can test your key fobs to ensure you programmed them correctly.Took me about 4min to program the 1 origional key fob and the 2 new key fobs I purchased here.3) There are several ways to program the key yourself. Amazon sells DIY key chip programmers but honestly I was more comfortable calling a mobile auto key company to come to my site (which they did the same day) to program my 2 new keys. Took him about 3 min. Cost for this service $75. (As I mentioned before he would have programmed the key fobs and cut the keys for the same price.)If you complted steps 1-3 you should now have 2 new sets of working keys and fobs. Cheers!