No hay artículos en el carro
No hay artículos en el carroMaria Esther Contreras Troncoso
Comentado en México el 27 de mayo de 2024
Lo que buscaba y buena calidad
Cristina
Comentado en Canadá el 17 de diciembre de 2024
Un cadeau pour quelqu'un qui l'adore je recommande ce produit là fortement
Jno
Comentado en Canadá el 9 de noviembre de 2024
I thought it would be bigger
CMP
Comentado en México el 15 de octubre de 2024
No se puede armar sin instructivo
Alexander I Slosman
Comentado en los Estados Unidos el 22 de septiembre de 2024
For the price this seems like a good value. It holds my sport coat and work shirt (on a separate hanger hung from the top vertical part) and seems sturdy and stable. I am a 5xl and my jacket fits nicely.I put it together on my 3x3 foot folding workbench. I carefully cut the shipping tape at the seams and unfolded the box. the box was longer than my work surface but that did not matter. I matched all the parts with the inventory list on the instruction sheet and opened the hardware pouch laying everything out in separate piles.The instructions are sparce but if you assemble it in the order listed it is pretty easy. The base is assembled first (Step1 on the instruction sheet), this is not critical but the base and main bodu need to be assembled separately and attached at the end. Be sure to put the 4 end caps in the base before connecting the base and main sections.Step 2 is the main body and it is ease if you work from the top down with a couple of exceptions. The first exception is that the curved "shoulder" piece needs to be inserted in to the pipes below before the first cross piece is attached (the same screws secure the connection and the cross piece). The second exception is to fully assemble the 4 outer extensions, pipes, screws, and end caps before attaching the remaining cross pieces. The short end of the screws go into the extensions, the long end attaches the cross pieces.Step 3 connects the base and main sections. I laid the main section on the work bench, inserted the screw then the plastic support (curved side to the base) and loosely (3 or 4 turns) screwed it to the main section. Repeat for the other side and then tighten the screws all the way down.Step 4 (mine, not included in the instructions) check all the connections are snug but not over tight.Took me about 20 minuets start to finish with one mess up connecting the first cross piece before connecting the "shoulder assembly".I like it. It seems stable. I would not use it for a ladder but for a set of cloths I'm sure it will stand up to the minimal stress put on it.
Claudia Isela
Comentado en México el 29 de marzo de 2023
Bien en referencia precio lo sentí algo bajo
pgarcia
Comentado en México el 18 de febrero de 2023
¿Qué tengo que hacer para que me envíen la pieza faltaste? La pieza faltante se identifica como F en el instructivo de armado. Le falta una tuerca que debe estar en el interior del tubo.
Nicolás Kahuam
Comentado en México el 9 de agosto de 2022
Si me gusto...Lo uso para poner mi ropa lista para el día siguiente.
Ma Isabel Rincon Aguilar
Comentado en México el 17 de mayo de 2022
es chaparrito peoro cumpe ocn su objetivo.
claudia c.
Comentado en México el 29 de diciembre de 2022
Funcional, pero un poco débil después del armado
allison
Comentado en Australia el 12 de junio de 2021
Super ideal for what we wanted, looks good too!! Hubby is even using it lol
Armen Simonyan
Quality product
Productos recomendados