No hay artículos en el carro
No hay artículos en el carroSherry O Fischer
Comentado en los Estados Unidos el 2 de febrero de 2025
These rods are so easy to assemble and are absolutely wonderful.
Super B!
Comentado en los Estados Unidos el 25 de junio de 2024
To start, I LOVE these doors and they function perfectly, but I had to take a star away for some of the worst instructions that have ever been made. If you can assemble your piece using some pictures that don't make sense and a bit of common sense engineering it'll be okay.
Rayjay88
Comentado en los Estados Unidos el 6 de marzo de 2024
The overall quality of the hardware seems good, but the track is awful. It shipped to me in five small segments that leave ugly joints visible at every mounting point and just looks bad. I've installed many of these sliding door kits and the track normally ships as a single or two piece. This was more than I was willing to live with and I ended up having to go buy a $20 piece of solid bar to make my own track.Get a different kit.
Samantha McNally
Comentado en los Estados Unidos el 15 de noviembre de 2024
I installed this kit in my laundry room behind my washing machine. A normal door could not swing open due to its length. All the parts were there and appear to be of very good quality. The instructions could use a bit of help. A lot of pictograms, but not a lot of words. Basic hand tools to install. Hammer. Level. Drill. Etc. A ratchet w/ a 10mm socket to drive the rail bolts into the wall recommended.My only complaint would be the 'guide' at the bottom of the door. The part that mounts on to the wall is an "L" shaped bracket with one leg longer than the other just like an actual "L." When you only have one thin (3/4in) door, like me, you'll want to put the longer leg of the "L" on the wall and have the shorter piece sticking out. The leg sticking out is the receiver for a plastic guide that you bolt on and set the depth as needed. Both legs of the "L" have two parallel slots you can put the screws (wall) or bolts (guide) through. The issue is the slots are actually different widths. It's not meant to be installed with the long leg on the wall as (barely) seen in my photos. The wall screw threads are so wide you actually need to thread them through the slots on the long leg. That's fine, but in doing so the threads get more than a bit damaged and to thread them does take some effort. Not a huge deal, but there is literally 0 reason for all 4 of these these slots to not be identical to allow this reversal. Other than that the install was pretty straightforward. Be sure to watch the video that shows how to assemble the track sections.
Kayla Evans
Comentado en los Estados Unidos el 25 de diciembre de 2023
When you use a lot of these like we do, this is not something we'd ever purchase knowingly. The little river type pie was that hold the bar together absolutely do not like up or fit at all, after 30 minutes with my malet i had to modify the holes by clamping and drilling the opening so the river xoukd actually fit. The bar is difficult to get level because the male and female parts don't fit correct, so you are left with slopes on your bar where the multiple pieces meet up. Our customers come to us because of quality and we are on a time table so we have to use this unfortunately.. dont make the same mistake. Check to see if it comes with a solid bar or two pieces max since it is much easier to limit slopes.
Productos recomendados