No hay artículos en el carro
No hay artículos en el carroProtege los productos KOHLER, busca siempre el logotipo de KOHLER Genuine Parts. Las piezas originales de KOHLER están diseñadas por ingenieros de KOHLER para mantener el rendimiento original del producto y promover la longevidad del producto
Hector Ruelas
Comentado en los Estados Unidos el 8 de febrero de 2025
This part fit perfectly in my toilet & I could install it easily (without help from my husband). It has since saved water & money just like I wanted.
Customer
Comentado en Canadá el 14 de enero de 2025
I thought I needed a canister replacement, when the cap part broke (black top piece in one of the photos). I couldn't visualize how this piece would work, but took a chance after reading more about it in the reviews. Not a lot of easy to find info out there, so for 18 dollars or so, I was willing to try this out. Got the piece today, and fixed the toilet in less than 5 minutes. Basically, it's the stem inside the canister (which has no issues, and I had recently replaced). I went to Canadian Tire, home Depot x 2, Rona plus and not one of those stores had this item or even a cannister style valve. My next step was to just buy a new toilet.Just glad I checked here, and hopefully this may save someone else some time if they have the same issue.Pic with the yellow top is the new piece. Other two pics are of the broken piece.Toilet is a Kohler 22952.
Tyler
Comentado en Canadá el 13 de agosto de 2024
I like that you can buy just this part opposed to replacing more of the guts or even whole toilet - model share and size were exact match and was not hard to find online. Quick fix for leaking toilet and saves water once you get on with purchasing and replacing part. Not hard to install with logical instructions.
Power User Canada
Comentado en Canadá el 9 de julio de 2024
Used it in a Kohler Cimmaron toilet with the canister flush valve. Much better design than the original part that came with the toilet! Took 5 minutes to install. Take the water hose off the old part, remove the cannister, Don't have to remove the chain from the cannister remove the old part by rotating according to directions, install new part without yellow top. Put back the cannister over the new part, put the hose on the yellow part, install the yellow part with washer and rotate according to instructions. Works great. I didn't need to use the new chain that came with it.
Douglas Lach
Comentado en los Estados Unidos el 6 de diciembre de 2024
I have a Kohler Tresham toile I installed a little over 10 years ago, and the canister valve at that tine was a female fitting (the fill line inserted into a hole in the top of the canister valve). Over time, this became worn and the line would no longer stay inserted in the canister. The main result of this is that the bowl would not refill to the proper level after flushing. This part instantly solved the problem in less than 10 minutes.The installation is very simple, there are no special tools or plumbing knowledge required, and there are a number of very good YouTube videos that can walk you through the process. After shutting off the water and draining the tank (a simple flush will do). turn the canister a quarter turn to remove it, remove the top from the center piece and remove that from the canister, insert the bottom of this repair piece up through the bottom of the canister, innsert the yellow top piece, and replace the canister in the reverse of how ou removed it (insert and turn one quarter turn). I would also recommend that you replace the seal around the bottom of the canister while you have it out. It's worth the $3 for the seal to save yourself another job in the future.
Productos recomendados
Mex $188.09
Mex $ 112 .00 Mex $112.00
Mex $705.78
Mex $ 324 .00 Mex $324.00
Mex $101.50
Mex $ 50 .00 Mex $50.00
Mex $159.00
Mex $ 87 .00 Mex $87.00
Mex $284.00
Mex $ 156 .00 Mex $156.00