No hay artículos en el carro
No hay artículos en el carroDescripción del producto
RayC
Comentado en los Estados Unidos el 25 de julio de 2024
As expected.
Shannon Mary
Comentado en los Estados Unidos el 24 de febrero de 2024
ALL RIGHT so I ran into the same problem everyone else did with these things coming in a stack so tightly stuck together that even the Gods can’t pull them apart. But I figured out the trick!STEP ONE: grab your stack of molds.STEP TWO: grab your rolling pin, a rubber mallet, a softball bat, a heavy stick, anything long with some weight.STEP THEEE: Hold the stack of molds ~45 degrees facing downwards, and smack at the lips of the molds - not hard enough to dent them, but hard enough to show em who’s boss. They’ll pop apart and hit the floor.STEP FOUR: take these suckers and give them a good cleaning, dry them, AND OIL THEM. Inside and out. I used mineral oil. Now you should be able to safely store them stacked without them wedging together so badly (or better yet, stack them BUT lay the stack on its side so gravity doesn’t do its thing.)If you’re good with a Dremel you can probably go ahead and polish them so that they no longer have the microscopic machining ridges that cause them to stick together, but…. I ain’t got the time for all that.So there you go - if you NEED molds this exact size (which I did), your options are limited and these will do the trick, just gotta put a little extra work in.Manufacturer: take the extra step of polishing these so they don’t stick together and you’ll get WAY better ratings and sales.
Sandra Sprenger
Comentado en Alemania el 27 de diciembre de 2024
Sehr schön zum Kerzen gießen, toll verarbeitet. Wenn die Kerzen abgekühlt sind kurz mit heißem Wasser übergießen dann rutschen die Kerzen fast von alleine raus.
Auntie M.
Comentado en los Estados Unidos el 13 de diciembre de 2023
Found these molds on Amazon and bought three sets. Already have a vintage set and these are comparable but better because the tops are rounded so no sharp rims. My only issue was I thought the pins were included. When the box arrived, I saw the pins were not included. A bit annoyed, I placed another order when if it had been made clear; I would have made ONE order instead of having to make a second separate order. Other than that slight annoyance, I am enjoying working with the votive molds.
Mhyrrannah Love
Comentado en Canadá el 28 de octubre de 2023
No se pudo cargar el contenido.
Productos recomendados
Mex $226.37
Mex $ 135 .00 Mex $135.00
Mex $133.96
Mex $ 80 .00 Mex $80.00