Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

SanZhi Bike Fork Stem Extender Bicycle Handlebar Riser Adaptor MTB Aluminium Alloy Head up Flexible Adapter for Mountain Bike, Road Bike, Cycling, BMX (L)

Envío gratis en pedidos superiores a Mex $600.00

Mex $429.00

Mex $ 227 .00 Mex $227.00

En stock
  • ★Includes Three 20mm,Three 10mm and one 5mm spacers for fine tuning your position.The total length is 185mm,Product weight:about 320g.This bike stem riser is only suitable for bicycles that the front fork diameter is less than or equal to 28.6mm/1.125".
  • ★Adjust the height of your handlebar properly makes it easier to hold traction on the steep hill. Bring you enjoyable and relaxed cycling experience without bending the body too low.
  • ★Anodized aluminum alloy construction, solid and strong, hard to loose, more safety when use.Strong in anti-corrosion and rust-free, high toughness and not deformed very durable and strong.
  • ★Handling more flexible, light weight, much easier to force when climbing, operation is comfortable and convenient.Just connect up the original front bicycle fork stem. The handlebar riser can apply to most of the bikes
  • ★If you are not satisfied with our product received,In terms of any problem of this product, you can send emails to us at any time. We will reply you as soon.


Nota: Este elevador de vástago de bicicleta solo es adecuado para bicicletas que el diámetro de la horquilla delantera es inferior o igual a 28,6 mm. Si el diámetro es superior a 28,6 mm/1,125, no se puede instalar. Por lo tanto, confirma el diámetro de tus bicicletas antes de comprar. Especificaciones: Material: aleación de aluminio. Color: negro Diámetro de la horquilla delantera: 28,6 mm. Características: apto para la mayoría de bicicletas de montaña MTB, bicicletas de carretera, etc. Extiende el vástago de la horquilla 70 mm al máximo (equipado con 7 juntas, 3 x 20 mm, 3 x 10 mm y 1 x 5 mm). Peso ligero, construcción de aleación forjada, alta resistencia. Fácil instalación, simplemente conecta el vástago original de la horquilla delantera. (Consulta los pasos de instalación a continuación) Pasos de instalación: 1. Retira la cubierta del manubrio original de la bicicleta. 2. Retire el soporte del manubrio. 3. Instala el extensor de vástago de la horquilla de bicicleta, luego ajusta la posición y fija el tornillo de ajuste. 4. Según la altura necesitas aumentar algunas juntas. 5. Instala el soporte del manubrio y fija los tornillos en el soporte. 6. Por último, instala la cubierta del extensor de vástago de la horquilla de bicicleta. El paquete incluye: 1 elevador de vástago ajustable para bicicleta


Productos recomendados