No hay artículos en el carro
No hay artículos en el carro
SmartZone-4X (ZS4X-3.0)
SmartZone es un panel de control de zona universalmente compatible. Es un reemplazo perfecto para casi cualquier otro panel de control de zona. Fácil de instalar, fácil de configurar y usar. No requiere voltímetro ni destornillador.
Compatible con cualquier tipo de equipo (GAS/eléctrico, bomba de calor y combustible doble)
Utiliza cualquier termostato de 24 V CA y cualquier amortiguador de 2 o 3 cables
Se pueden crear hasta 20 sistemas Zone añadiendo hasta cinco placas SmartZone-4X a un sistema.
Características: compatible con todos los tipos de equipo: gas, eléctrica, bomba de calor, combustible dual.
Utiliza cualquier termostato
LED en cada terminal: muestra llamadas de termostato, posición del amortiguador del modo del equipo.
visualización completa: temperatura de suministro, estado del sistema, temperaturas límite de HI - LO
Configuración sencilla: interruptores de inmersión Los botones permiten la configuración en segundos.
Sensor TEMP incluido: sonda de acero inoxidable con cable de alambre de 10 pies
Especificaciones:
Firmware - Versión 20E
Potencia del sistema: 24 VCA/12 VA
Relés de amortiguador: 10 amperios cada uno (ZONE1, ZONE2, ZONE3, ZONE4-FRESH AIR).
Relés de equipo: 10 amperios cada uno (Y1, Y2, G, W1-OB, W2-EH)
Entradas de termostato - 24 V CA / 2 amperios (Z-Y, Z-G, Z-W, Z-OB).
Otras entradas -24 VCA / 2 AMP (ECO)
Suministro de termistor incluido TEMP
Más información en el sitio web de ECOJAY
Modelo de sistema de zonificación común reemplazado por SmartZone-4X:
Honeywell HZ432, HZ322, HZ311, HZ221 Ecojay SmartZone, SmartZone-4X, SmartZone-2X, ZS4X, XCI, XCI Controls, SZ4, SZ4DF SZ4DF, SZ-2, SZ-2DF, SZ2, SZ2DF, SmartZonePLUS, EWC UZC4, NCM300, ST-2E, ST-3E, controles CI, ZoneFirst, MDZ3, MMZ3, MZS4, JacksonSystems, Jackson Systems Z-200-HC, Z-200-HP, Z-2000, Z-300-HC-MS, Z-300-HPS, Z-600, WCZ-600 Braeburn 1. 4444444 140303 DuraZone RED4, SMZ2, SMZ3, SMZ4, JTZ AprilAire 6202, 6203, 6303, 6404, 6402, 6504, Arzel, Zonex, iO HVAC.
John
Comentado en los Estados Unidos el 9 de enero de 2025
So far so good
jtknudsen39
Comentado en los Estados Unidos el 11 de noviembre de 2024
I had an older Durozone Red-4 zone control system that failed and had to find a replacement. I found this product on Amazon and it is actually better than my original unit. Installation was pretty straight forward with the exception of wiring the dampers. The old dampers were also Durozone dampers and they had 5 terminals and required both 24AC wires to power the dampers. The Smartzone damper connections only contained the common terminal. Luckily, the Smartzone website provides wiring instructions for many types of dampers and I was able to power the dampers with no issues. I've looked at a lot of different options for zone controls and this solution was by far the cheapest and best solution I could find.
J. Drouin
Comentado en los Estados Unidos el 10 de octubre de 2023
After failures of 2 Honeywell HZ311 multi-zone controllers in 5 years, I decided not to manifest the definition of “insanity” by replacing the second blown board with a 3rd one. I went with this ecojay instead. I bought and installed the 4x board and it is far superior to the Honeywell HZ311 in every way.Having had to troubleshoot and repair multiple issues over several years with the Honeywell board, I had become well versed in the multizone concept and function, so by the time I installed this board, it literally took me 30 minutes to install, including two trips to the garage to flip breakers. I love the status lights and temp sensor reading for the supply line. I’m very happy with this product and it has been working perfectly.
thomas pfotzer
Comentado en los Estados Unidos el 3 de julio de 2021
I had a 20 year old Carrier Zone controller on its last legs. I bought this Ecojay SmartZone-4X controller to replace the old one at the point I upgraded the furnace and cooling condenser.Before I bought the EcoJay product, I called in to verify that it would work with my equipment. I got a slow, detailed, thorough discussion, and decided to buy it.After my new HVAC equipment was installed, I installed the zone controller.The product does exactly what the sales literature says it will. I've had it in use for about a month, and it's performed flawlessly.This controller board is exceptionally well-designed and manufactured. It's easy to install, and the documentation is easy to follow. The board has LED lights on it and digital displays that tell you exactly what the board is doing, making it a snap to diagnose problems and monitor the board's performance during the test-out phase of installation.The post-sale support is exceptional on all counts. Fast, competent, patient, free. I am not an HVAC professional, and I made two mistakes during installation which would have ruined a less-well-designed board. I called EcoJay's support line, and they helped me fix my problems in minutes.I recommend this product with no reservations.
Vraz
Comentado en los Estados Unidos el 15 de febrero de 2021
Had to replace furnace two years ago and got a two-stage unit with "one-stage compatibility" as required by my old Honeywell EMM3 zone panel. During a single digit negative cold snap, the furnace started tripping its protection limit circuit (running stage two for one zone for too long). Replaced the Honeywell with the Ecojay and all issues resolved. Between the supply air temp sensor and the "keep on stage one unless multiple zones require heat", furnace performance is at a new level. Zone temperatures are spot on and could not be happier.The unit has lots of LEDs to make any tech geek smile. More importantly, diagnostics are trivial because you know in real time exactly what signals the controller is receiving and what it is sending. The one opportunity for improvement would be including discrete terminals for controlling a humidifier and A/C contactor. With some care, you can get two 18ga wires into the existing terminals (two W1 for furnace+humidifier and two Y1 for furnace+AC), but it is not optimal. It is impossible to get the three required commons into the single spring terminal. I mounted an external terminal block to address the secondary connections. Moreover, having the ecojay intelligently control the humidifier (only engage while supply air is at proper temperature) would make the unit even that much better.Great bit of engineering at a great price and top quality performance.
Productos recomendados
Mex $934.93
Mex $ 430 .00 Mex $430.00
Mex $344.00
Mex $ 158 .00 Mex $158.00
Mex $1,240.00
Mex $ 582 .00 Mex $582.00
Mex $582.49
Mex $ 297 .00 Mex $297.00
Mex $7,871.23
Mex $ 1,881 .00 Mex $1,881.00