No hay artículos en el carro
No hay artículos en el carroDescripción del producto
El artículo es una bobina de encendido de escalera de Jacob del generador Marx del controlador flyback de la bobina ZVS Tesla. Es un circuito de alimentación que toma una entrada de 12-36 V (se recomienda 24 V) y la convierte en corriente continua de alto voltaje, siendo el voltaje de salida aproximadamente 1000 veces el voltaje de entrada. El circuito está diseñado para accionar bobinas de encendido mediante un circuito de retorno llamado "circuito ZVS", que opera con conmutación de voltaje 0. Es popular entre los fanáticos debido a su potencia, bajo calor, simplicidad y confiabilidad. Se puede utilizar en dispositivos como bobinas Tesla de intervalo de chispa (SGTC) y generadores Jacob/ladder/Marx. El paquete incluye una placa controladora de bobina Tesla ZVS y una bobina de encendido.
El paquete incluye:
- 1 placa controladora de bobina ZVS Tesla
- 1 bobina de encendido.
Entrada de 12‑36 V CC (se recomienda 24 V), salida de corriente continua de alto voltaje, voltaje de entrada de aproximadamente 1000 veces. La entrada de 12 V puede alcanzar una potencia de 50 a 100 W, la entrada máxima de 24 V puede alcanzar más de 200 W, por lo que es mejor solicitar una corriente de suministro de energía de más de 10 A.
Esta fuente de alimentación de bobina Tesla y esta bobina de encendido han sido sometidas a pruebas de seguridad, son seguras y confiables, y puedes usarlas con confianza.
Un circuito de accionamiento flyback, que se utiliza para accionar la bobina de encendido, al igual que el interruptor de voltaje 0, masas de ventiladores lo llamaron circuito ZVS.
Debido a su potencia, bajo calor, simple y confiable, los ventiladores se usan ampliamente en la bobina Tesla de intervalo de chispa de accionamiento (SGTC) y para el generador Jacob/escaleras/Marx, etc.
La entrada de 12 V puede alcanzar una potencia de 50 a 100 W, la entrada máxima de 24 V puede alcanzar más de 200 W, por lo que es mejor solicitar una corriente de suministro de energía de más de 10 A.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Customer
Comentado en Canadá el 1 de febrero de 2024
One of the first things that set me back a bit was the current draw. It draws about 10 amps on a 12 volt supply. It worked well when I ran it with a small 12 v battery. I tested it with two and three batteries in series and it worked well with 2. Three batteries seemed to be too much but caused no damage. The provided flyback has a diode in the output and will initiate an arc from about 1/2 to 1 inch in length. Although the arc is very quiet is is bright and heats up a 14awg wire to glowing temperature pretty quickly.
Productos recomendados
Mex $325.00
Mex $ 178 .00 Mex $178.00
Mex $1,868.99
Mex $ 915 .00 Mex $915.00
Mex $221.00
Mex $ 130 .00 Mex $130.00
Mex $523.00
Mex $ 245 .00 Mex $245.00
Mex $4,641.73
Mex $ 1,881 .00 Mex $1,881.00