No hay artículos en el carro
No hay artículos en el carro Rrina - 4 piezas de acero inoxidable 304 con brida dividida de pared redonda para varias tuberías.
Material: hecho de acero inoxidable de alta calidad con tratamiento de superficie de pulido, no se oxida fácilmente, antihumedad, antioxiclación, resistente a la corrosión, resistencia a los ácidos/álcalis para uso en interiores y exteriores.
Cantidad de embalaje: 4 placas de protección de brida para diámetro de tubería: 42 mm. Tamaño total: 100 x 42 x 6 mm.
Adecuado para: tuberías de calefacción, tuberías de gas, tuberías de agua, radiadores, válvulas angulares, grifos, tuberías de drenaje, etc.
Instalación de uso: cuando la tubería pasa a través de la pared, dejará una superficie antiestética. Se puede utilizar para decorar el producto con una cubierta de tubería. Hay una cinta autoadhesiva en la parte posterior, que se puede fijar directamente a la pared. Es fácil de instalar sin quitar la válvula existente.
Nota:
Debido a la diferencia entre los diferentes monitores, la imagen puede no reflejar el color real del artículo.
Servicio al cliente:
Apoyaremos la garantía de por vida y el 100% de devolución de dinero para tu problema, además, ofrecemos servicio siempre en línea las 24 horas, bienvenido a venir a nosotros si necesitas ayuda.
Dayv B
Comentado en los Estados Unidos el 17 de julio de 2024
Edges were cut very poorly so they’re sharp and don’t look great. Does its job though.
John
Comentado en los Estados Unidos el 19 de diciembre de 2024
They look nice and are easy to put on but they keep on falling off.
Rebecca McGrath
Comentado en los Estados Unidos el 23 de enero de 2024
Bought these for the aesthetics as well as preventing any mice from slipping through a hole in the wall.Per photos, the half piece for the toilet is still on. The top and bottom pieces for the vanity pipes did not - one bottom piece came off, while both top pieces came off. That is brand new smooth wallboard. Good thing I stuck steel wool in the holes as a precaution to deter mice. One star ding for that. I was skeptical these would stay.I like that they just stick flush to the wall, and can only be used as a half. These are also easy to cut with tin snips. Eg, I have a tall baseboard in one bathroom and the toilet water pipe is just above it.I'll try gluing the pieces back on. I doubt anyone will be pulling the vanity out.
mike beck
Comentado en los Estados Unidos el 6 de julio de 2023
I knew the second I opened the package that the protective film on each half had more adherence than the sticky pads in the back. Out of the 4, 1/2 inch covers and two of the 1 inch covers, all but one half of each, stayed to the wall. I had to pull out the caulk gun just to get them to stay adhered to the wall, which completely defeats the purpose.It was also my mistake, that these would be a heavier material content (the pictures make it look like these are a solid piece machined from a blank, but alas no. Cheaply made punch press feel from a bargain bin at the local hardware store for .99 is all they really are. Bottle caps have more quality to them than these.The worst part was that I also assumed that these “snapped” together around the pipe but no…they could have saved any time or effort and just cut them in half without any “slot” and called it a day.Bubble gum machine garbage.
TimB
Comentado en los Estados Unidos el 19 de junio de 2023
These are nice because of the foam backing with adhesive. That said just put a little liquid nails on the backing to make it stick and stay on the wall.
Productos recomendados
Mex $294.00
Mex $ 155 .00 Mex $155.00
Mex $350.00
Mex $ 171 .00 Mex $171.00
Mex $614.41
Mex $ 288 .00 Mex $288.00
Mex $395.56
Mex $ 205 .00 Mex $205.00
Mex $1,218.00
Mex $ 535 .00 Mex $535.00