No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Good little vacum but awful battery
Comentado en el Reino Unido el 14 de marzo de 2025
Takes off material as it should and lasts well
Duane Hall
Comentado en los Estados Unidos el 26 de febrero de 2025
I purchased one set of belts that broke within seconds, so I replaced them with these belts. These have worked flawlessly in my mini-grinder.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
OCDSD619
Comentado en los Estados Unidos el 25 de abril de 2025
This sensor worked great and was an exact fit. Great value.
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Nick
Comentado en los Estados Unidos el 16 de julio de 2024
The original failed at 308k milesThis has worked a few months so far.As any other sensor, give the vehicle a minute to adjust and it should work as the original. This worked for a 97 jeep Cherokee sport 4.0
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
Eduardo fRANCO.
Comentado en México el 3 de mayo de 2024
Calidad y precio
giles dolman
Comentado en el Reino Unido el 5 de diciembre de 2024
OK did the job.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Thomas A.
Comentado en los Estados Unidos el 3 de noviembre de 2024
Changed this in order to affect the idling on my jeep. Two screws and it is a done deal. Easy fix and an improvement to fuel economy and starting.
Dwayne C.
Comentado en Canadá el 22 de octubre de 2024
Didn't break although the coating did separate. It fit my sander without modifications. I was impressed.
Charles masse
Comentado en Canadá el 23 de abril de 2024
Toutes les bandes sont mal collées et brise automatiquement à la première utilisation.Complètement absurde!Ne pas acheter
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
knuckle up ink tattoos
Comentado en los Estados Unidos el 7 de agosto de 2021
Bought it for a 1999 Dodge 2500 with a 5.9 360. It didn't fit the factory plug which I knew from other people's reviews but I figured I could use a file to get it to fit which I did. Took about 10 minutes to file it down another 10 minutes to install. Did not fix my high idle issue so I took it out and bench tested it with a multimeter and it's just no good out of the box. All the values were way over way under. Would not recommend.
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Alfonso David Ayala
Comentado en México el 15 de septiembre de 2021
Buena calidad, funciona pero el conector entra muy apretado
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Caleb Hess
Comentado en los Estados Unidos el 20 de octubre de 2019
Bought for my 03 Dodge Dakota as it was having issues with regulating air flow, idling crappy and wanting to stall out. Replacing it was a little more of a pain than I initially thought - but I was able to get it done in about 15 minutes. The harness connector seemed to be a little tight for the harness to slip over and I had to use a little force to get the harness to connect fully to the sensor. Truck runs better than ever after replacing the old MAP sensor with this one!
Productos recomendados
Mex $2,930.96
Mex $ 1,201 .00 Mex $1,201.00
Mex $127.99
Mex $ 75 .00 Mex $75.00