Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

AKD - Arnés de cableado de 2 cables, kit de arnés de cable para barra de luz LED, luces antiniebla con relé de 12 V 40 A, interruptor basculante, arnés de cableado para ATV, UTV, SUV, todoterreno,

Envío gratis en pedidos superiores a Mex $600.00

Mex $400.00

Mex $ 184 .00 Mex $184.00

En stock

1.Tamaño:1 Lead


Acerca de este artículo

  • Ajuste universal: el kit de arnés de cableado de barra de luz de 2 cables tiene una capacidad de carga de hasta 200 W, que se puede aplicar a dos cápsulas LED al mismo tiempo, como luces todoterreno, luces antiniebla, luces de trabajo y otros dispositivos con una fuente de alimentación de 12 V.
  • Extensible: hasta 8 pies de longitud, disponible en la longitud deseada, el arnés de cableado de nailon resistente se puede montar en cualquier lugar que desees en tu vehículo.
  • Doble protección: el arnés de cableado de luz antiniebla incorpora relé de 40 A y fusible de hoja de 10 A en línea para protección contra sobrecarga y cortocircuitos. Alta temperatura y resistencia a la fusión.
  • Interruptor de encendido/apagado: controla fácilmente tus cápsulas LED o interruptor de encendido y apagado de la barra de luz con la luz indicadora roja incluso en la oscuridad. Duradero para ser presionado más de 10.000 veces después de la prueba.
  • El paquete incluye: arnés de cableado de barra de luz de 2 cables de 8 pies con interruptor de palanca de encendido/apagado, relé de alimentación de 40 A, fusible de hoja de 10 A y un fusible de hoja de repuesto de 10 A.


Especificaciones:
Longitud: 8 pies.
Material: nailon duradero.
Calibre del cable: 18 AWG
Potencia máxima: 200 W.
Voltaje de funcionamiento: 12 V CC.
Temperatura de funcionamiento: -30 ℃ a 80 ℃.
Vida útil: más de 50.000 horas.
Garantía de calidad: 12 meses.
Aplicación:
Compatible con todos los vehículos de 12 V CC y otras aplicaciones, compatible con Off Road, Chevy, Dodge Ram, Pickup, SUV, camión, UTV, SUV, SUV, resistente, furgoneta, 4x4, excavadora, tractores, remolques, carro de golf, barcos, marina, etc.
Perfecto para cápsulas LED, luces antiniebla, barra de luz LED, luces de trabajo, luces de marcha atrás, faros, luces de conducción, luces de carretera, etc.
Paquete:
Arnés de cableado de 8 pies, 2 cables
Interruptor basculante ON / OFF
Relé resistente de 40 A.
Fusible de hoja de 10 A.
Conectores macho totalmente aislados
Conectores hembra totalmente aislados
¿Por qué elegir AKD Part?
- Fabricante profesional.
- Respuesta rápida, 24 horas en línea.
Cualquier problema, no dudes en ponerte en contacto con nosotros.


Wikus Potgieter
Comentado en los Estados Unidos el 25 de marzo de 2025
Excellent quality
Kevin Ombina
Comentado en Canadá el 4 de diciembre de 2024
Almost got fried because of the quality of the material! PLEASE AVOID THIS PRODUCT PEOPLE. I do not recommend this!!!
Challenger R/T
Comentado en los Estados Unidos el 10 de octubre de 2022
Harness work well with the fog lights I purchased, easy installation and long enough to mount lights on a jeep wrangler
Dennis
Comentado en los Estados Unidos el 4 de abril de 2022
Nicely done with good protective covering on the wiring. Easy connection to my led lights with plenty of length for my application.
T
Comentado en los Estados Unidos el 9 de abril de 2021
The main issue I'm having with the harness is that the cable lengths are setup to work in cars that have the battery on the left side of the engine bay AND you're okay with mounting the rocker switch somewhere to the left of the steering wheel. There's probably only 4 to 5 feet of total cable length from the leads that connect to the battery, to the rocker switch itself. Since my battery is on the passenger side of the engine bay, I'll have to add another 5 or 6 feet of cable to allow the rocker switch to route all the way to the center console where I want it mounted.Some finer points on the use of the harness. First, let me point out that I'm using this to run a stock radiator fan on an '05 GTO. (Since removing the AC compressor, the rad fans just run at 100% and I don't want that.) There are two fans in the radiator shroud and since each fan draws around 60-70 Amps at startup, then settle down to around 2 amps continuous, I am only going to connect to ONE fan (specifically the larger fan on the passenger side).This seems to be enough to keep the car cool and despite the 40 amp rating for the harness, it handled the 70 Amp initial spike just fine. I haven't tried plugging in both fans through the harness because I don't want to push my luck since I figure if the car is in such a situation where the one fan won't keep it cool enough I can just pull over and plug the stock wiring harness back into the fans and have them both run at full speed.
Productos recomendados

Mex $596.39

Mex $ 280 .00 Mex $280.00

4.8
Elegir