No hay artículos en el carro
No hay artículos en el carro
- En los circuitos de control industriales para el control del arrancador electromagnético, contactor, relé y otros circuitos eléctricos ampliamente utilizados.
- Fácil de instalar con orificio de montaje de placa de 16 mm de diámetro.
- Luz de control integrada para un uso cómodo y seguro.
J. C. Rice
Comentado en los Estados Unidos el 16 de agosto de 2023
These buttons are large enough to use in toys or to stand out in a crowded panel. The push button operates smoothly with a pleasant resistance and an audible click. They can be wired OFF-(ON) [NO] or ON-(OFF) [NC]. The LED is independent of the button state.You could solder connections. I used 2.8 mm spade crimp connectors (female) with insulating and those have help up with no trouble.I used these buttons in a toy for a toddler and they get pounded rather than pressed. They have survived.
David N.
Comentado en los Estados Unidos el 10 de diciembre de 2022
My daughter purchased these for a university engineering project. She designed and built a game similar to whack-a-mole but using these illuminated switches in place of the moles. As these lamps are designed for 24V, they had to be modified for 5V operation. Fortunately, the button tops can be popped off and the plug-in LED module is easily pulled out using needle nose pliers. Using a soldering iron, she disassembled the LED module, removed and bypassed the voltage dropping resistor, and reassembled the switch. She included the proper resistors on her circuit board for using 5V for these lamps. The lamps are not standard LEDs but are designed to be connected using either polarity which is a nice benefit. These worked very well for this application.
John Eric Booth
Comentado en los Estados Unidos el 5 de octubre de 2021
These are quite good. I used them in a Star Wars themed arcade cabinet. The orange indicators are a bit dim than I would care for, but overall very well made.
Maciek
Comentado en los Estados Unidos el 29 de agosto de 2020
I bought them for a battery powered DIY toy. They have a very satisfying click. The insert with the LED and the resistor can be easily removed and. For my need I desoldered the resistors to better control the brightness at 3.3V
ParaPilot
Comentado en los Estados Unidos el 24 de enero de 2020
I needed these for building my own special PLC test box. They are the red and green buttons on the lower level with the 5 contacts on the blue back underneath. I like these as both the terminals for the internal LED are separate from any switch mechanism and the switch has both NO and NC contact options. For a PLC test box you could actually have 2 different switch inputs and 1 LED output to this one part. Bottom line is I control the light separate from the switch using the PLC. The switch is good quality, easy to solder and has a nice 4 bend corner mounting washer on the inside that bites into the smooth plastic box to prevent rotation in the round hole. Overall it is a good design and easily fitted by hand. I would recommend these.
Productos recomendados
Mex $176.00
Mex $ 98 .00 Mex $98.00
Mex $195.40
Mex $ 105 .00 Mex $105.00
Mex $293.77
Mex $ 135 .00 Mex $135.00
Mex $1,448.57
Mex $ 709 .00 Mex $709.00
Mex $200.00
Mex $ 104 .00 Mex $104.00