No hay artículos en el carro
No hay artículos en el carroC.R. LAURENCE 1420C CRL Transparente Jalousie y Louver Slat Vinilo - Rollo de 100 pies. El vinilo CRL Clear Jalousie y Louver Slat evita que las corrientes de aire se infiltren a través de la rejilla y las ventanas de jalousie. El vinilo simplemente se ajusta sobre el borde de los paneles de vidrio y no obstruye las líneas de visión. Variaciones de números de pieza: 1420C
HawaiiR
Comentado en los Estados Unidos el 24 de julio de 2024
Believe the other reviews! I certainly should have before I purchased this. While in theory it would have been an excellent product to help seal the gaps between jalousie windows, in practice it’s not - mainly because, as the other negative reviews have stated, the material is all warped. The closer you get to the center of the spool, the worse it gets. I’d say about halfway through the spool the rubber is so warped that it’s impossible to put on your windows. The only way I got mine to stay was to use some type of adhesive and clips on each jalousie to keep them somewhat straight until the glue dried. It was a massive pain to use these.I would have returned this, but I’d already cut up the material.I think unless someone can find a way to have the spool unravel evenly and keep the rubber straight, this item is mostly useless.
MG
Comentado en Australia el 10 de septiembre de 2024
The seals prevent the louvre shutting fully and allow wind and insects through the side edges. Would only suit louvre windows with a large gap. See imageReturned Item.
4keiki
Comentado en los Estados Unidos el 1 de noviembre de 2022
Bought a roll of this material a couple of years ago and found it to work great. It was slightly stiffer material which allowed the "fin" to really extend out and seal out the water between the slats. Decided to go all in and just bought three more rolls. This newer batch seemed to be of a slightly softer material which I really liked at first because it was easier to handle. However, as I got in about 80 - 90 feet in the roll, it appeared that when they spooled the material, it was too tight. The material had gotten twisted, so the tension made it harder to install. Also, certain areas of the "fin" was either wavy, which affected the seal, or was smashed down nearly flat, which again negatively affected the seal. I'm hopeful that while its installed and straight, keeping the windows shut tight in the sunlight a couple of days will help to alleviate this issue. Overall, I would purchase the product again, but I would potentially factor in a 10-15% wastage for that last length of material on the inner part of the spool. I believe if the spooling was just a bit looser, it would improve the delivered product.
Customer
Comentado en los Estados Unidos el 11 de febrero de 2020
We installed these on some windows in an old building to stop the drafts. They worked great at stopping the draft and keeping the house warm during winter months. Our maintenance guy said that it was easy to install.
daniel
Comentado en los Estados Unidos el 5 de febrero de 2018
this is the best! I moved into an old house with big gaps between all the slats and it was getting super cold at night cause I'm basically living with open windows. NOT ANYMORE! this fit my slats perfectly and closed up all the gaps. looking forward to the lower cost of heating and cooling. sound reduction is also a bonus.
Productos recomendados