Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

DERNORD - Juego de 2 juntas sanitarias de tres abrazaderas de 1.5 pulgadas Buna-N (NBR) con visualización de tipo fijado de acero inoxidable, malla 8

Envío gratis en pedidos superiores a Mex $600.00

Mex $378.75

Mex $ 200 .00 Mex $200.00

En stock

1.Tamaño:100 Mesh


Acerca de este artículo

  • Junta sanitaria Buna-N (NBR) para accesorios estándar de tres tréboles o tres abrazaderas de 1.5 pulgadas, se aplica a malla 8
  • Diámetro exterior: 50,5 mm
  • Material de grado alimenticio para Buna-N (NBR) negro
  • La visualización de metal está moldeada en la junta, la visualización no se mueve ni gira antes y después de encajar en el accesorio del tubo
  • Las juntas Buna-N (NBR) son ampliamente utilizadas en lavadoras a presión, filtro, bomba, manguera de agua, tubería de plomería, mantenimiento de cochera, mecánica de automóviles, etc.



DERNORD Buna-N (NBR) junta sanitaria se adapta a: 3,8 cm Tri-Clamp
Aplicar al diámetro exterior del tubo: 38 mm.
Diámetro exterior: 50,5 mm.
visualización de acero inoxidable: malla 8.
Grosor (máx.) : 4,8 mm.
Las juntas Buna-N (NBR) son ampliamente utilizadas en lavadoras a presión, filtro, bomba, manguera de agua, tubería de plomería, mantenimiento de cochera, mecánica de automóviles, etc.


Peter
Comentado en los Estados Unidos el 25 de marzo de 2024
These are good quality tri clamp strainer gaskets. I got the 30 mesh to trap any larger bits of debris when I am running a cleaner cycle on my fermenters. The 30mesh is perfect for trapping larger debris and prevent recirculation through the pump system. This also minimizes the resistance so nearly full power is directed towards the CIP ball. By preventing this from entering your pump you not only help keep your pump clean but also keep debris from plugging up your CIP ball and impacting flow.They seal perfectly and the mesh is perfectly embedded into the gasket material without any poke through. I am happy with their performance!
JH
Comentado en los Estados Unidos el 10 de octubre de 2024
These are filters that replace the normal rubber gasket that goes between triclamp fittings to add a filter in line to protect things like pumps etc. That's really what you should use it for, as a last protection to keep chunks out of things like a pump. You should not rely on it as a primary filter when doing something like transferring wort in homebrewing because these meshes will clog very quickly due to the small surface area. You should also take care to select the proper mesh size for your application or it will clog quickly.With those caveats in mind, these are pretty useful as a last line of defense to protect your pumps and other things downstream that might not like to be fed chunks. The filter is well made and shows no sign of rusting or any other problems after using it. I feel like the price is a bit high for what you're getting, which is my other main critique, but these filters are useful in the right application.
Productos recomendados

Mex $499.62

Mex $ 239 .00 Mex $239.00

4.6
Elegir

Mex $276.78

Mex $ 152 .00 Mex $152.00

4.6
Elegir

Mex $1,810.43

Mex $ 814 .00 Mex $814.00

4.6
Elegir