No hay artículos en el carro
No hay artículos en el carroEl conmutador inteligente web D-Link Gigabit presenta una gama de conmutadores administrados diseñados teniendo en cuenta la facilidad de uso. Son ideales en lugar de conmutadores no administrados para empresas en crecimiento que buscan una simple expansión de puertos con alguna función de Capa 2.
Martin
Comentado en Canadá el 29 de septiembre de 2019
Bought this for a home lab. While I'm not a huge fan of the GUI to set it up, the amount of features supported by this switch compared to others I found at this price range is very impressive. Not much else to say - it looks and feels like a quality product, and works as you would expect.Documentation is lacking for layer 3 functionality, which I assume is a relatively recent addition to the firmware for this product. For my purposes this is a non-issue, but for others I suspect it could be problematic.
dasb
Comentado en el Reino Unido el 29 de julio de 2018
Straightforward to install. Works very well. Neat package.Only problem I had was some of my devices have non-standard POE (two Panasonic cameras still needed their own old POE).
Rick
Comentado en los Estados Unidos el 5 de agosto de 2016
Since 2011 I have been using two D-ink DGS-1024 unmanaged switches, along with another brand of 16 port POE switch to power my POE devices. They have worked perfectly, during this time I never had any problems with them, never had to power-cycle them, etc. Recently the other switch I was using for my POE devices had an issue, so I purchased two of these DGS-1210-28P POE switches to replace everything. They have been running with no problems since June 2, 2016, with no issues.I like the fact that every port has POE capability. I have had no issues with POE devices properly connecting to the switches.I have included two photos. Please note that the device above the switches is a Samsung phone system.Update 5 May 2018 -- Switches are still working great, been in service almost two years. Just upgraded firmware to 4.10.004 with no issues. I have the C1 hardware versionUpdate 17 February 2020 -- I am still using these switches, been in service almost four years. I note the firmware available on the D-Link web site, version 4,10.051 has a date of 2019, although I am still using version 4.10.004.Since I have had these switches I have never once had to reset them. They currently are showing uptime of over 489 days since their last reboot (they are powered via a UPS).This switch will do a lot of L2 functions, supports Radius, SNMP, etc., which I have not used; however I have used the link aggregation function to aggregate two gig ethernet ports to my Synology server, and I have also tested Spanning Tree Protocol, and it works perfectly.I did this test with my two switches to demonstrate how STP works for a friend who is using several of these switches in a commercial application where the switches are separated by considerable distance and connected via Ethernet radio links. In my case, I simply activated STP on my switches which are normally each connected via Ethernet to router, and then connected an extra Ethernet cable between the two switches. In the event any one cable was disconnected, the Ethernet packets would use the alternate links and everything stayed connected.In my friend's case, he was able to set up two switches at separate locations, each of which were connected via a Ubiquiti Ethernet radio link to a router at a third location, with a third radio Ethernet connection between the two switches. In this case, if any one radio link fails, the traffic will continue running through the other available links, and it works flawlessly.Firmware upgrade is easy and can be done from a web browser or using TFTP, and the switch also has a command line interface if so desired. The switch also has a number of security capabilities which I have not needed to use since the switches are in a residential situation and sit behind a firewall.
PGR
Comentado en los Estados Unidos el 3 de febrero de 2016
Really needed to upgrade my home network and getting this switch was a great choice for me. The only thing I wish was that the vendor did a test before selling this item. One of the ports isn't working (notice port 17) and I can hear a screw inside when I move the switch around. Otherwise it's a good switch, fast and has been running since it came. The management application has a few quirks (isn't the best UI), but it gets the job done and it's very straight forward.Pros- Fast transfer/performance- Indicators are a blessing coming from my previous router- Web management- Not a hot unit + comes with a few power saving features- Do the research, there is a lot more great features, but these are things I thought I would highlightCons- 1 port didn't work- screw was loose (inside) when the item arrived
Zeb2380
Comentado en Alemania el 25 de octubre de 2011
Ich benutze 2 DEM-310GT Module in den Switches D-Link DGS-1216T und DGS 1500-28 um zwei Etagen miteinander zu verbinden. Die Installation verläuft ganz einfach durch Einstecken der GBICs (hot swap) in die Switches und die Verbindung steht eigentlich schon. Die Switches entsprechend seinen Bedürfnisse konfigurieren und fertig.
Productos recomendados
Mex $993.27
Mex $ 486 .00 Mex $486.00
Mex $567.00
Mex $ 277 .00 Mex $277.00
Mex $1,159.42
Mex $ 521 .00 Mex $521.00
Mex $699.00
Mex $ 356 .00 Mex $356.00