No hay artículos en el carro
No hay artículos en el carroMás información del producto
The DMT Difference
Diamond Uniformity, Coverage, Surface Flatness
Uniformity: DMT uses micronized monocrystalline diamonds, precisely sized for a more uniform diamond surface. No other diamond sharpeners offers micronized monocrystalline diamond and most offer the lesser grade poly-crystalline diamond. Mono-crystalline is like an ice cube made up of one particle holding its form while poly-crystalline is like a snow-cone made up of many small particles that get sheared off during use.
Coverage: DMT’s process assures the most diamonds per square inch in the industry providing a more durable sharpening surface.
Surface Flatness: DMT bench stones are engineered flat, assuring even contact with the knife or tool.
Choice of Diamond Surfaces
Interrupted or polka dot surface for which DMT is famous has slightly recessed holes that will collect metal fines (swarf) removed during sharpening to prevent loading. Fast sharpening action; not recommended for pointed or very small tools.
Continuous surface presents a more conventional looking sharpening surface. Fast sharpening action; able to use on small surface edges.
HardCoat, DMT’s newest proprietary surface, is able to withstand the rigors of ceramic sharpening, providing an even longer service life to the sharpener.
DMT Commitment
DMT is committed to providing the best diamond sharpeners in the marketplace. If the sharpener is found to be defective, we will replace it.
Benefits of The DMT Difference
- Precise Diamond Sizing for Consistent Sharpening and Longer Life
- Best Diamond Coverage for Longer-Lasting Service
- Flat Surface for Even Sharpening
- Choice In Diamond Surfaces
- DMT Commitment- Replacement If Found To Be Defective
- DMT Commitment- Replacement If Found To Be Defective
Diafold Serrated Sharpener Varied Uses
Home
Just a few examples of edges around the home this model can address: Shears, Bread Knife, Paring Knife, Utility Knife.
Garden
Just a few examples of edges for use in the garden this model can address: Grafting Knife, Serrated Garden Spade, Serrated Grass Hook.
Outdoor / Sports
Just a few examples of edges for outdoor and sporting activities this model can address: Folding Knife, Gut Hook, Pocket Knife, Fillet Knife, Skinning Knife, Multi-Tool, Serrated Knife.
Woodworking
Just a few examples of edges for woodworkers this model can address: Forstner Bit, Auger Bit, Hollowing Adze, Ring and Hook Tools.
Portable Sharpeners
DMT offers an assortment of very portable, hand-held sharpeners that provide easy storage in home, shop, truck, back-pack or RV. Made to sharpen an array of knives and tools while portable enough for on-the-go sharpening. Interrupted surface models include Diafold, Mini-Sharp, 4-inch Diamond Whetstone; continuous diamond surface stones include 3-inch Credit Card Style, 4-inch stones and Mini-Hone sharpeners; one Double Sided Diafold is available in the HardCoat diamond surface, designed to withstand the rigors of ceramic knife sharpening.
Sharpening Steels
Most steels are designed to align a knife’s blade, but DMT diamond sharpening steels in 10-inch, 12-inch and 14-inch models will both align and hone the blade. All are continuous diamond surface but one 12-inch model is offered in DMT’s HardCoat diamond surface, specifically designed to withstand the rigors of ceramic knife sharpening. For those who wish to sharpen with ceramic, DMT offers a 12-inch ceramic steel sharpener.
Bench / Counter Stones
DMT offers a nice selection of diamond bench stones from 6-inch to 12-inch lengths of varying widths to accommodate home, sport and tactical knives along with a mixture of DIY and woodworking tools. Models include interrupted, continuous and one DuoSharp model in HardCoat diamond. Models include Diamond Whetstone, DuoSharp and Dia-Sharp bench stones.
Guided Sharpeners
If you are unsure about sharpening, try one of DMT’s sharpening systems to assist with proper sharpening angles. All systems revolve around the 7-angle adjustable blade guide utilizing either 4-inch diamond whetstones in the Aligner models or Double Sided Diafold Sharpeners in the MagnaGuide line. The blade guide can also be used with DMT’s bench stones.
For best sharpening results keep diamond stone clean
Care and Use of DMT Diamond Sharpeners
All models are designed to be used dry or with water so there are no messy oils and extensive clean up to worry about. Always clean the DMT sharpening surface after sharpening. One option is to use a high polymer eraser to remove any residue, especially useful with cylindrical styles like Crystal Saver and Steels. Another is to simply rinse the surface with water and wipe dry. After several sharpenings, clean more thoroughly with a mild abrasive and brush; rinse surface with water and wipe dry.
Always put away dry and store in a dry environment. Use leafing (paper towels, cloth, plastic storage bag) in between your bench stones to prevent abrasive sides from rubbing.
- Use Dry or with Water
- Clean and Wipe Dry
- Store Dry
About Sharpening with DMT
The Most out of your DMT Sharpener
There is a ‘break-in’ period for your diamond stone. Initially, it will feel especially rough but will smooth over time without impacting performance. Let the diamonds do the work; just light strokes with the edge to sharpen, same number of strokes each side. Approximately 5 or 6 strokes per side (depending upon condition of edge) compared to 30 strokes per side on a conventional stone, saving time and extending the life of the knife or tool. Start with a coarser grit for damaged or dull edges and work to finer grits. The work the edge is to do will help you determine the grit needed: Rough work, end with coarse grit (cutting cardboard); finer work, work through finer grits (food preparation).
- Initial break-in
- Light strokes to sharpen – let the diamond do the work
- Faster than conventional sharpening methods
- Rough work – coarser grit
- Fine work – finer grit
Kindle Customer
Comentado en los Estados Unidos el 26 de diciembre de 2024
I really like this diamond file for sharpening the inside of my woodcarving gouges... works on even 2 mm and v-tool gouges to take off the inside burr from sharpening. Makes life easier and tools sharper!
JONATAN
Comentado en México el 8 de abril de 2024
es muy fina siento que casi no rebaja nada
Mrs. Tricia Garson
Comentado en Australia el 15 de abril de 2020
Good for what I want but I need to practice using it more to perfect it
Bahlo
Comentado en Alemania el 28 de marzo de 2018
Ich hatte bei meiner Mutter ein altes Brotmesser vor dem Mülleimertod gerettet, weil es komplett stumpf war. Genauso wie auch andere Messer mit Wellenschliff bei mir Zuhause. Ich wollte einfach schon seit langem ausprobieren, ob man auch ein Wellenschliffmesser wieder scharf bekommt. Der DMT Diafold ist sehr leicht, sehr kompakt und ist trotzdem richtig stabil! Da wackelt nichts, was mich sehr erstaunt hat, ist doch der faltbare Griff (er lässt sich über die Schleifspitze "falten" und dient also auch als Schutz) aus Plastik. Der Abtrag ist gut, und das alte, und vollkommen stumpfe Brotmesser meiner Mutter hatte ich nach ca. 15 Minuten wieder scharf! Ich bin sicherlich nicht der Schärfprofi, aber mit dem Diafold ging das wirklich sehr einfach. Ich habe das Messer flach entlang der Tischkante gelegt, wobei die Seite mit den eingeschliffenen Wellen natürlich oben liegen muss. nach wenigen Minuten war mir klar, dass es Sinn macht, das Messer festzuklemmen, was ich mit einer kleinen Schraubzwinge getan habe. Dann bin ich einfach in die einzelenen Wellen mit der Feile hinein, und habe versucht, den bereits eingeschliffenen Winkel der Welle nachzuschleifen. Das merkt man ziemlich gut auf Sicht, man kann aber auch die einzelnen Wellen mit einem Edding bemalen, dann sieht man sehr genau, ob man den richtigen Winkel getroffen hat, und an den richtigen Stellen Material abträgt. Sobald sich auf der Rückseite ein spürbarer Grat bildet, kann man zur nächsten Welle übergehen. Zum Schluss, wenn alle Wellen ihren Grat bekommen haben, einfach einige Male über die Rückseite schleifen, um den Grat zu entfernen. Fertig! Noch ein Hinweis: mit wenig Druck arbeiten, da sich sonst die Diamanten lösen könnten, Fazit: Der Diafold ist klein, fein und Leistungsstark! Eine absolute Kaufempfehlung!
Antonio Ruiz Rodríguez
Comentado en España el 17 de noviembre de 2018
Usé el producto para afilar cuchillos serrados. Es muy bueno
Robert Plewnarz
Comentado en los Estados Unidos el 18 de mayo de 2014
I use DMT flat sharpeners for standard cutting tools but for serrated blades, hawksbill knives etc. the DMT tapered rod is by far the best. I'm originally for Western New York State , home of Cutco and Ontario Cutlery. The Cutco serrated blades are notoriously difficult to sharpen but the DMT does a great job. I suggest getting both the coarse and fine (blue and red) versions. It takes a little practice to get the right angle and width when sharpening serrated blades but once you get it figured out sharpening goes pretty quickly. One thing I particularly like about the DMT tool is the diamond chips are attached via brazing or something similar and they do not pull out of the matrix at all. I've probably sharpened 200 times with these tools and they cut just as well now as they did on day one. I also like the folding feature. Perfect for a quick touch up when out in the field.
Productos recomendados
Mex $764.55
Mex $ 412 .00 Mex $412.00
Mex $1,718.63
Mex $ 687 .00 Mex $687.00