No hay artículos en el carro
No hay artículos en el carroSteven & Deborah Ferguson
Comentado en los Estados Unidos el 15 de agosto de 2023
Never liked the idea of reusing manifold bolts, or studs due to the amount of high temperature cycles they go through. Had to reuse the OEM cone washers but everything else in the kit fit just fine. Use a tap to clean the the threaded holes in the cylinder head with compressed air. Install with a decent quality anti-seize during installation and everything with work out fine.
Ryan
Comentado en los Estados Unidos el 28 de noviembre de 2022
bought for my 99 cherokee 4.0 because I had to replace the original exhaust manifold due to a huge crack and the original bolts were crusty looking so ordered this kit ahead of time and the bolts and studs fit perfectly. The hardware seems to be just as beefy or slightly more than the factory hardware. Only thing is it does not come with the washers and there are parts of the kit you don't use on the 4.0
MacGruber
Comentado en Canadá el 29 de junio de 2021
Nearly perfect set of bolts, however the beefy stock washers were missing and I needed to reuse my stock ones. Otherwise, these will work great.
C
Comentado en Canadá el 10 de mayo de 2020
Nice to get most of the new hardware in oneKit, a lot cheaper than what the dealer wanted or the local parts store. Only complaint I have is that the kit didn’t include the special retaining washers.
JT
Comentado en Canadá el 12 de abril de 2019
I used the kit on a 2.5L Dakota, as suggested. I had to reuse the old washers. The plastic retainers are for positioning the outside exhaust manifold bolts on 2.5L Dakotas and Wranglers.
Productos recomendados