Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Dremel 4300-DR-RT Herramienta giratoria de velocidad variable (renovada)

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,917.08

Mex $ 786 .00 Mex $786.00

En stock

Acerca de este artículo

  • Luz pivote: con la nueva luz pivotante en el Dremel 4300-DR, tus proyectos están bien iluminados con una línea de visión óptima a medida que la luz gira para dirigir la iluminación donde la quieras
  • Potente motor: el Dremel 4300 ofrece el motor más potente con velocidad variable integrada y circuitos electrónicos de retroalimentación
  • Cuerpo delgado y ergonómico: el diseño delgado y ergonómico del cuerpo proporciona una zona de agarre cómoda de 360 grados sin importar cómo lo sostengas para una mayor facilidad de uso
  • Vida útil prolongada: los cepillos de motor reemplazables prolongan la vida útil de la herramienta
  • Funcionamiento suave y silencioso: la construcción de rodamiento de bolas se enfría fácilmente para un funcionamiento suave y silencioso


La Dremel 4300-DR-RT es la primera herramienta giratoria Dremel que permite cambios de accesorios sin herramientas y sin pegamento con la inclusión del portabrocas de tres mandíbulas. El portabrocas acepta todos los tamaños de vástago de accesorios Dremel para cambios rápidos y convenientes de accesorios sin la necesidad de una llave. Con la nueva luz pivotante, tus proyectos están bien iluminados con una línea de visión óptima a medida que la luz gira para dirigir la iluminación donde lo desee. Este es un producto renovado respaldado por una garantía de 90 días.

Potente motor con velocidad variable integrada

Experimentar la gama completa de aplicaciones de herramientas giratorias Dremel es más fácil que nunca porque el 4300 ofrece el motor más potente con velocidad variable integrada y circuitos de retroalimentación electrónica. Y el diseño delgado y ergonómico del cuerpo proporciona una cómoda zona de agarre de 360 grados sin importar cómo la sostengas para una mayor facilidad de uso.

Sistema de flujo de aire rediseñado

El sistema de flujo de aire completamente rediseñado permite que el Dremel 4300 funcione fresco, silencioso y suave, haciendo que los proyectos sean más agradables que nunca. Cuenta con una velocidad variable con retroalimentación electrónica para un rendimiento constante en todas las aplicaciones. El interruptor de encendido/apagado separado y el dial de control de velocidad hacen que sea una característica conveniente entre los trabajos. Los cepillos de motor reemplazables prolongan la vida útil de la herramienta, y la construcción de rodamiento de bolas se enfría para un funcionamiento suave y silencioso.


Daniel
Comentado en los Estados Unidos el 6 de enero de 2025
Looked at these for a couple years. Found one "refurbished". Great price. Factory "new". Works great. Very handy to have in the tool box.
Mark V-dub
Comentado en los Estados Unidos el 23 de enero de 2025
Excellent. Works great. Like brand new
alice ard
Comentado en los Estados Unidos el 12 de abril de 2025
enjoy this dremel tool it's great got it at a good price i had a old 3000 and lost the field in it but this tool out beat the 3000 by a mile thank
Carlos Villa
Comentado en México el 21 de mayo de 2024
Está en muy buenas condiciones estéticas y funcional al 100por ciento. Reacondicionado de fabrica
Jakeman
Comentado en los Estados Unidos el 21 de febrero de 2024
Very impressed with the power, chuck, light and speed setting over the previous top model Dremel I owned. The chuck is a game changer making bit changes much faster...no more collets and wrenches to fool with! The rotary speed setting is easier than the small buttons on my previous model and it's much more powerful. The light is a nice addition. Makes me glad I burned the old one up!The only potential downside is that it is a bit larger than the old one, so it may be more difficult to use in close quarters but haven't experienced that yet.
Jose manuel
Comentado en México el 4 de noviembre de 2024
HERRAMIENTA PERFECTA PARA FITUROS PROYECTOS
Edie Keepsfire
Comentado en los Estados Unidos el 21 de abril de 2022
I was going to get the Dremel 120 Volt, but the listing was mislabelled (it said ROTARY but was a Vibrating tool), but the Dremel 4300 seems to be the right fit for all my needs. My needs: I'll be doing some engraving, but also more "sculpting / carving" as well as polishing and -well. I just need the versatility of the tool. Read a bunch of reviews, watched some videos to see wha tthe 4300 could do versus others, and opted for it over the 4000 in that it sounds like it'll hold up better to long stretches of heavy use (again, as an artist).I will say this: I'm VERY LIKELY to pick up the Flex Tool Attachment for it, and soon: I get the impression that the Flex Tool Attachment will help it feel a lot more like "an art tool" as opposed to "doing art with a power tool."That being said, I'm real happy with the feel of it, and I'll add two tips / observations that I should point out ahead of time (at the end of my review). It's a bit heavy, but I figured "i'm strong, so I'll deal with that; a more capable tool, but the trade off will be the weight." Regardless of what the numbers say, I'm factoring in "articulation of art, hand position for that kind of control, plus the weight of the tool" when I say that it feels at least twice as heavy as using a tattoo machine. So that IS something to consider - hand fatigue (again, I'm sure using the Flex Shaft Tool Attachment will help with that)- I was only able to run it for my first time for a short period of time (shoulda timed it, but I'd say roughly 15-20 minutes? IF that?)Normally, I don't review things unless I've been using them for a WHILE, but I am popping in with more of a sense of "this is how it felt out of the box."I feel like there's a good relationship I can develop with this tool, as an artist. I really felt confident about that, JUST on a first run, even though the pics aren't great (practice wood, practice shapes, etc). It'll take some learning, I can tell -as with any new tool or medium. And as with any new tool or medium, it's about listening to how the tool behaves, and working together with it to achieve your needs. Again, I can see that, and I feel confident I'll be able to learn this tool for what art I plan to do with it.1. The reviews and tips were right: For that "carving" feel, you'll want something (like this) with the capacity for higher RPMs -lower settings it felt like I had less control than at higher settings.2. If you're looking at reviews to figure out if it's right for you, I'd suggest doing a few youtube searches with the keywords of the tool AND what you intend to use it for, and get specific if you need to, to see how it handles. I'd also recommend a GOOGLE search for differences and comparative reviews. I found that VERY helpful.3. TIPS ON HANDLING: a note on this. So think of the tool oriented as a compass if you hold it up and down. Think of the North-South axis as "how you load the bit into the chuck / collet" and then "how it rotates" as on the East-West axis. I found there was better control:3a: When I "drew" lines that followed the East-West movement (trying to move the tool in a North-South orientation had me jumping the bit off the lines and just a general lack of control, and3b: Considering "moving the tool on an East-West axis" also consider PUSHING away from you, as opposed to pulling towards you. Again, this was a matter of feeling like I had more control, and less erroneous "jumps" when it was more a "pushing pressure" than a "pulling pressure." I hope that makes sense.
Productos recomendados

Mex $800.94

Mex $ 408 .00 Mex $408.00

4.8
Elegir

Mex $1,445.61

Mex $ 650 .00 Mex $650.00

4.7
Elegir

Mex $858.43

Mex $ 437 .00 Mex $437.00

4.9
Elegir

Mex $825.00

Mex $ 371 .00 Mex $371.00

5.0
Elegir