No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Rápido, operación de un movimiento
Solo necesitas una mano para utilizar este práctico crimpador RJ45 A diferencia de las herramientas de perforación estándar, nuestra herramienta easyJACK, te permite cortar 8 cables en un movimiento suave y fluido
Una herramienta de larga duración
Nuestra herramienta de crimpado Keystone RJ45 está fabricada con cuchillas de acero inoxidable que no se oxidan. También tiene asas de goma fuertes y ranuradas que pueden soportar fácilmente la presión constante
Agarre ergonómico para un fácil manejo
El agarre es de tamaño óptimo y ángulo para proporcionarte un gran apalancamiento y una mejor sujeción. También minimiza la tensión en tus manos porque requiere menos esfuerzo
kbuck
Comentado en los Estados Unidos el 22 de febrero de 2025
Easy to use, includes lots of keystone jacks, and great value (especially comparing to some other, very expensive keystone kits). This is much easier to use than pass-through jacks and crimps very quickly. None of my crimps have any signal issues - and I have a couple of my cables doing 2.5 gigabit.
Chris
Comentado en los Estados Unidos el 16 de noviembre de 2024
I needed to convert 7 CAT5E drops in my new home, which were originally setup as RJ11 phone jacks, to CAT5E RJ45. If I had to do this with traditional punch down tools it would have take much longer. 7 drops, 8 wires and 2 jacks for each drop equates to 112 wires I would have had to punch down, individually on all the jacks, to complete the project. This tool and the provided easyJACKs (which you have to use with the tool) punches down all 8 wires on the jack at once and cuts the ends off. It worked perfectly and I couldn't have been happier with the results. I don't typically review products, but this one was a game changer for my project. I wish they had tools and jacks like this when I used to punch down dozens of these, routinely, as part of my work 20 years ago.
JD Lien
Comentado en Canadá el 16 de octubre de 2024
Have you ever sliced up your hand trying to use a traditional punch-down tool to terminate keystone connectors? I have, and it sucks, so having a tool like this one is awesome, and boy does it ever save time!It's not perfect and has drawbacks, but I'd take this tool any day of the week over a punchdown tool and bandaged hand.First, you'll need to use this with Everest Media keystones, so this won't help you with whatever other keystones you may have. I can't confirm if any other brands work in this tool, but trying this may damage the tool or the keystone jacks. Fortunately, I've found Everest jacks to be of good quality and fairly easy to use, and they do fit into Ubiquiti's patch panels (which have holes too small for other brands' jacks like Hubbell's).The tool is a little flimsy-feeling and doesn't exude the quality of proper "professional" brands, but I haven't experienced any failures or issues with anything breaking just yet. The push-down pins inside are delicate, so you could break them by crimping down a keystone that isn't fully inserted, which itself can be tricky.I have found that getting keystones inserted correctly into this tool takes practice. You have to carefully finagle the connector around inside the tool until the jack face sticks out of the tool as far as possible (just over 1mm or so). It can take a few tries, and I found this rather difficult with the first several connectors I crimped.It would have been nice to see a ratcheting mechanism on this tool, which would make it easier for those with low grip strength to ensure they have fully inserted the wires, but this is not a big deal.The tool does include a little case, which feels cheap. I just toss this in my toolbox, but I can see how some would worry about damaging the pins inside, so the case is a nice addition and can also hold several keystones alongside the tool.Overall, this is a great tool at a very reasonable price if you're okay committing to Everest's keystone jacks, but if you do commercial data installation for a living, I worry this wouldn't hold up for heavy-duty use.
mario aguirre
Comentado en México el 30 de noviembre de 2023
La herramienta funciona muy bien, nada más tener cuidado al comprar JACK deben ser los modelos que indica, ya que solo es funciona para esos conectores,
YYZ-TOR
Comentado en Canadá el 4 de septiembre de 2023
A lot safer to use than traditional punch down tool; I had slipped and sliced my thumb with those. Also beats it out in terms of speed, ease of use and I had 1 super short wire from wall gang that I was able to terminate using this. Blade is sharp and cut all wires in 1 shot, no need to bend wires till they fall off! Very much worth it and very good quality.
APerez
Comentado en México el 5 de marzo de 2022
Pues me gusto mucho lo práctico que Es para instalar una red con jack Keytone. Deja muy bien ponchado . El costo beneficios recomendado
T. Wende
Comentado en los Estados Unidos el 15 de febrero de 2022
I've keystoned a fair amount of cabling over the years, somewhere over 2,000 terminations. I bought this crimp tool, along with EMS's RJ45 jacks in bulk, for my own remodel. Wish I'd found these years ago. There's a very mild learning curve and it's important to get the tension set properly. Once you're there, this is an amazing tool.No more pucks to deal with to keep dents off drywall. No more bang-bang-bang impact tool to mash a hole in your finger when your hands get tired or sweaty and a keystone rolls out from under the impact tool. None of that. A couple of hours to terminate 30 cables at both ends (I don't claim to be fast), everything was muscle memory by the 4th or 5th keystone. Push wire into one side of the keystone, turn the cable into its valley, push 4 more in, check, set the keystone in the crimper, one squeeze and you're done; the tool seats and cleaves in one go. Perfect terminations, 60 for 60, all confirmed by my Fluke CIQ. Happy times, next task.The system isn't cheap. It's also not cheaply made. The crimper has good hand feel and its padded case has real rather than living hinges and closures. Can't speak to its long term durability or how long its blades stay viably sharp after one small project, but I'm relegating my Fluke crimper, impact tool and puck (if I can find it) to a dusty, disused corner of the tool cabinet. VERY well done, EMS!
Productos recomendados
Mex $1,288.47
Mex $ 554 .00 Mex $554.00
Mex $3,900.57
Mex $ 1,881 .00 Mex $1,881.00
Mex $541.62
Mex $ 259 .00 Mex $259.00
Mex $444.41
Mex $ 199 .00 Mex $199.00