Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

Dianna Reeves

Comentado en los Estados Unidos el 24 de diciembre de 2024

I have always wanted a mag drill. I have a double frame project that convinced me to spend the $. Pleased with the drill. I’d like to see it a bit tougher, but for the $, it does well. I have drilled 50+ 5/8 holes in truck frame rail. I didn’t miss. It does require care, and not bullet proof by any means, the cords on the outside, with plastic conduit type fittings are not likely to last the industrial use the drill will incur? I’m pleased, but I know I won’t use a lot. If you are going to use more than occasionally, spend twice the $ and get a more industrial machine. If it’s a rare use, this will fill the need.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

A1Fence

Comentado en los Estados Unidos el 18 de diciembre de 2024

Beats drilling with regular bits. Very good quality Magdeill for a fraction of the big name brands. The magnet is strong and holds well on 1/8” thick or greater material.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

1anteup

Comentado en los Estados Unidos el 7 de noviembre de 2024

I purchased the EVOMAG42 February of '23. I had an issue with the head creeping down when I retracted it to the top. I called customer service to ask them what I could do to to repair it. They informed me that it had a three year warranty to send it to them. They paid shipping both ways. They received it on a Monday morning, repaired it and shipped it out that same evening. It works like a champ. Thank you for the outstanding company that you are.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

cinthia s.

Comentado en México el 20 de junio de 2022

No se pudo cargar el contenido.

Kyle Quinn