No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Este divisor de línea 480172 de Extech proporciona una manera rápida y fácil de “abrir” líneas eléctricas estándar de 120 voltios CA, eliminando la necesidad de cortar el enchufe y separar los conductores. Cuando se conecta entre una salida de CA de 120 voltios y un dispositivo bajo prueba, este divisor separa el conductor vivo / vivo del neutro y tierra, lo que permite a los usuarios medir corriente CA de hasta 15 amperios en líneas de dos o tres cables usando una pinza amperimétrica.
Amazon Opinión
AC Line Splitter
This Extech Line Splitter provides a fast and easy way to “open” standard 120V AC electrical lines, eliminating the need to cut off the plug and separate the conductors.
How it Works
When connected between a 120V AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current – up to 15 amps on a two-wire or three-wire lines — using a clamp meter.
Dual Readings
The 480172 provides two openings — one opening provides one-to-one current measurements, and the other provides times-ten (X10) readings so that low-current readings will display with higher resolution on a clamp meter.
Voltage Checker
This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.
JAFChE
Comentado en los Estados Unidos el 8 de marzo de 2025
Works great with a clamp-on ammeter to troubleshoot home electrical circuits without having to cut the wiring of the device your checking for current flow. Just plug the current splitter into the outlet, then plug in the device your checking as if you were plugging it into the normal wall outlet. Attach the clamp-on ammeter and take your current flow reading after you turn on the device that's drawing current. Simple and easy.
Aldo Omar Méndez Mendoza
Comentado en México el 14 de marzo de 2025
Buen precio, aún no lo pruebo.
Mike Notley
Comentado en Canadá el 6 de octubre de 2024
Works well.
Cookiejar
Comentado en Canadá el 13 de mayo de 2022
Works well, though expensive. Costs nearly as much as some clamp on meters for 10 turns of wire. BUT one can use it to increase clamp on DC amp meter's sensitivity by 10X by messing with leads.
Alejandro
Comentado en México el 1 de febrero de 2020
BUEN PRODUCTO SE VE DE BUENA CALIDAD, EXCELENTE DIVISOR DE LINEA ME HACE MAS FACIL EL TRABAJO PARA MEDIR LOS CONSUMOS DE AMPERAJE EN MIS ELECTRODOMESTICOS
Guillermo Cardenas
Comentado en México el 10 de septiembre de 2019
Excelente producto muena calidad por el precio
Cliente de
Comentado en México el 2 de agosto de 2018
Buen tiempo de entrega y el equipo de muy buena calidad
Marvin
Comentado en Canadá el 16 de noviembre de 2015
This is a wonderful tool for anyone seeking to find the volt / amp rating on any plug in device. Which combined with a clamp meter it works like a charm to isolate the hot conductor. It's great when doing a power audit of devices in a house. This is very useful when designing a backup solar power supply drawing on batteries. Knowing the power demand of any given device is important when scaling the system, or figuring out circuits.
Zodoz
Comentado en los Estados Unidos el 19 de octubre de 2015
At a discount, this device is worth $10-12 delivered. All it does is split the hot and neutral line paths so you can clip a clamp meter into one of the legs and measure current draw. There is also a probe hole to check Vac with your DMM. The device is made of durable ABS plastic and feels tough, and should serve to make quick measurements of current draw from plug in appliances.There are complaints of defects, but if you get a cheap unit, its very easy to fix. The HOT line of my unit is solid copper, while the neutral line is a black insulated wire. The ground line uses red wire, all the wrong colors per NEMA but it works, and you don't see the wires anyway inside. The male and female sockets are anchored security into the body, and won't pull loose.I confirmed this unit is UL listed.Depending on the type of current draw, the accuracy tends to vary. Placed in series with a Fluke 87V, the clamp meter tended to be at most 10% off when the draw was continuous, and it did not matter which leg of device you used. When the draw was heavily pulsed, the clamp meter did not read the peak current but averaged them, while the Fluke could show the peak draw, and if set to MIN-MAX mode, one could measure MIN, AVE and MAX current.
Productos recomendados
Medidor de energía WiFi inteligente de 3 fases con sensor de nivel de circuito de 3 120 A, 100-240 V
Mex $1,826.85
Mex $ 895 .00 Mex $895.00
Mex $2,570.66
Mex $ 1,079 .00 Mex $1,079.00
Mex $314.00
Mex $ 144 .00 Mex $144.00
Mex $299.00
Mex $ 149 .00 Mex $149.00