No hay artículos en el carro
No hay artículos en el carroMás información del producto
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Larry Parker Williams
Comentado en los Estados Unidos el 26 de abril de 2023
Did a bunch of research before buying. This brand is high quality. Probably in the top 3 products available in this market. This kit was the most complete I could find. I had to order a T handle die driver tool for a square portion. I also ordered a thread gap gauge to verify I was buying the right coil kit. Tapped into an aluminum body clutch assembly on my dirt bike. Worked flawlessly. The instructions helped. Read them twice before starting.
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Christopher Delorme
Comentado en Canadá el 29 de agosto de 2022
Works great
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Jared Bennett
Comentado en los Estados Unidos el 15 de diciembre de 2022
Repaired the treads good as new. If you don’t know what you’re doing, you’re gonna make whatever is screwed up even worse. You need to be patient when using these things, but once you get it right, you can bet your bottom dollar on it
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Desmo
Comentado en los Estados Unidos el 9 de noviembre de 2021
Used kit to repair brake line holder that was stripped out. Good (or better) than new...Drill and tap were perfect. Be careful to not bottom out the tap and tear out the threads.After ruining 4 inserts trying to thread them in, I sprayed one with WD-40 and it finally threaded in correctly. They would get close and the bunch up at the end and not fully install and get "stretched" and jump the threads.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Scoochie
Comentado en los Estados Unidos el 18 de septiembre de 2019
The kit comes with everything you need to install the thread insert, plus 10 inserts. The tools are made in Taiwan and China while the inserts come from the U.K. The instructions are clear and precise. I've installed many of these and never had a failure. The quality is very good. They work in steel, cast iron, aluminum, stainless steel and just about any metal you can name. I've even installed them in acetel plastic. I highly recommend the E-Z Lok kits. I have 2 master kits, one in fractional and one in metric but they do not include the 3 and 4 mm sizes. If you intend to do many sizes the master kits are more cost effective.
Productos recomendados
Mex $432.00
Mex $ 233 .00 Mex $233.00
Mex $231.00
Mex $ 138 .00 Mex $138.00
Mex $185.00
Mex $ 98 .00 Mex $98.00
Mex $296.00
Mex $ 148 .00 Mex $148.00