No hay artículos en el carro
No hay artículos en el carroTamaño: 2 unidades
Producto de alta calidad.
- Carcasa de metal.
- Mini ST-LINK/V2 es totalmente compatible con las funciones oficiales.
- Compatible con actualizaciones automáticas, gama completa de STM32 SWD y gama completa de descarga STM8 SWIM.
- Compatible con la gama completa de interfaz de depuración STM32 SWD.
- Una simple interfaz de 4 cables (incluyendo alimentación), rápida y estable.
- Definición de interfaz marcada en la carcasa. No es necesario consultar el manual (idioma español no garantizado).
Compatible con versiones de software:
- ST-LINK Utility 2.0 y 4.2.1 superior.
- STVD y superior.
- STVP 3.2.3 y superior.
- IAR EWARM V6.20 y superior.
- IAR EWSTM8 V1.30 y superior.
- KEIL RVMDK V4.21 y superior.
- El firmware de fábrica se ha actualizado al último V2.J17.S4.
- Compatible con 3 voltios y 5 voltios de potencia.
- Los puertos I/O están protegidos en caso de errores operativos causados por ST-LINK V2.
- La interfaz es fácil de usar de cobre chapado en oro de 2.54 mm.
- Viene con líneas Dupont de 20 cm para facilitar la conexión.
Jesus G. Jaquez Bermudez
Comentado en México el 8 de julio de 2024
Tal vez no sean para trabajos profesionales pero cumplen las espectativas. Para lo que las ocupo, son buenas y a buen precio, sobre todo el surtido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Richard N.
Comentado en Canadá el 13 de julio de 2024
No se pudo cargar el contenido.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
Yannick
Comentado en Canadá el 10 de julio de 2024
With the ST-Link V2 clones, it is always a hit and miss. The last one I bought did contain a clone chip that was blocked by the STM32CubeProgrammer, which is the latest tool from ST. It worked only in the old and limited ST-Link Utility.But this one works just well with STM32CubeProgrammer. I'm very pleased about that. Inside is a MH2103A CBT6 chip. I have been able to update it to the latest firmware and it is still recognized by the STM32CubeProgrammer.I did give it only 4 stars because it has a cheap plastic case as opposed as the advertised metal case. The other problem is that the USB connector mounting tabs are not soldered. Easy to solder when you have a soldering iron, but I would expect to see them soldered from the factory.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
bender
Comentado en los Estados Unidos el 4 de marzo de 2024
I’ve been utilizing these FainWan ST-Link V2 Mini units to program my Blue Pill development boards via SWD, and I must say they perform flawlessly. The fact that you get two of them for under $15 is an incredible value. These little devices seamlessly integrate with the STM32CubeIDE, serving both as a programmer and a debugger.The build quality is commendable, and I appreciate the thoughtful addition of Dupont jumper wires, which come in incredibly handy. As for drawbacks, I’m drawing a blank—I can’t think of any cons. In summary, these ST-Link units come highly recommended for anyone working with STM8 or STM32 microcontrollers.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
Shawn
Comentado en los Estados Unidos el 23 de enero de 2024
If you have enough ST-Link V2's, you can just leave them in your project because in addition to debugging through SWD, you can also reset and re-flash without pushing the pesky boot and reset buttons!!I tested these upon receipt and they worked perfectly. I think I need a few more, lol. Though I am getting a V3MINIE - USBC and faster everything. Hopefully I won't be losing anything with it. But I will always have my V2 stash to fall back on, haha.I'm not familiar with FainWan but have gotten a few products from the lately and been happy with everything.Fair price ($15) for prime delivery of 2. Recommended.
ya.bg
Comentado en México el 27 de abril de 2024
La cantidad y calidad de las piezas es bastante buena. Incluye piezas para cualquier tipo de trabajo, el desgaste es lento por lo que duran bastante. Ademas el diseño y calidad del estuche es genial.
Luis MCM
Comentado en México el 26 de abril de 2024
Incrible set. Muy funcional y muy bien surtido.
Productos recomendados
Mex $266.28
Mex $ 151 .00 Mex $151.00
Mex $183.00
Mex $ 96 .00 Mex $96.00
Mex $142.11
Mex $ 71 .00 Mex $71.00
Mex $712.56
Mex $ 342 .00 Mex $342.00
Mex $160.00
Mex $ 94 .00 Mex $94.00