No hay artículos en el carro
No hay artículos en el carroEl kit de mantenimiento de cuchillas para cortacésped de carrete de Fiskars incluye todo lo que necesitas para devolver las cuchillas de la cortadora de carrete a condición similar, ya sea que tengas una cortadora de carrete de contacto tradicional que requiere afilado anual o una de las segadoras de carrete Fiskars StaySharp que ha visto un uso intensivo durante muchos años. Simplemente aplica el compuesto de lapping a las cuchillas del carrete de corte con el cepillo de aplicación y utiliza la manivela de mano para girar el carrete hacia atrás hasta que las cuchillas se restauren.
M H
Comentado en los Estados Unidos el 8 de marzo de 2025
Works well, easy to push and not terribly heavy. Most cons below are just the nature of real mowers, but useful to know if you haven't used one.Cons:*Struggles with tall thick grass, and weeds that are taller and have either reedy stems or soft bendy stems like dandalions. It tends to push them over and you will probably need to pull or weedwhack those.*Not great at leaf mulching*The blade adjustment bolts were incredibly difficult to loosen at first. I had to put a pipe over my wrench to get more leverage. Drill might have worked better.* sharpening is a chore. If you can set it up with a drill, do. Or see if your local hardware store does it.* can jam with twigs, but easy to unjam. Stay away from or clean up wood chip mulch.Pros:* Works great for my small shady yard* easy to push in most conditions* because it struggles with tall, thick grass, you have good motivation to get it done and not procrastinate* low maintenance. Most cutting problems can be resolved with adjusting the blade. So far I have not needed to sharpen in at least 3 seasons, although I did once to learn how.* doesn't take up much storage space* very little assembly.If you don't mind the limitations of reel mowers, this is a good product.
Donald Mulders
Comentado en Canadá el 2 de junio de 2023
This kit works! Yes, installing the handle can be a bit tricky, and as warned in the well-written instructions that came with the kit, removing one of the parts from the reel mower was a challenge. Nevertheless, I was able to install the handle after some persuasion and then effectively lapped (as in, honed or sharpened) the reel blades. This kit works as advertised, and I recommend it to save what I estimate would be an expensive sharpening cost if you were to take the mower somewhere else.
mitchell reimer
Comentado en Canadá el 20 de octubre de 2023
Best looking lawn on the block, works good blades are easy to sharpen
Bruce G. Strang
Comentado en Canadá el 25 de julio de 2019
Did what it was supposed to do. Make sure you have the original Fiskar instruction booklet handy to make sure you follow the proper steps, like the loosening of bolts before lowering or raising the rotating blade above the cutting bar. I missed that step at first and when I thought I was lowering/raising the blades using the wrench, it was actually doing nothing without the loosening of the other bolts.I had an old American Mower years ago before the Fiskar and had a sharpening kit from Lee Valley. Worked great, but the handle doesn’t fit the Fiskar. I watched a bunch of YouTube vids on how to jerry-rig a solution using a bit of garden hose, bike clamps and an electric drill. Tried it. Gave up. Bit the bullet and bought the Fiskar kit. Skip the YouTube vids and just get the kit.Mind you, I have two and a half tubs of the compound...should last a lifetime.
Ariel
Comentado en los Estados Unidos el 25 de septiembre de 2019
I watched a few videos online and realized that I wanted to buy this kit rather than McGuyver my own method of turning the blades on my Fiskars mower (people use short pieces of rubber hose + hose clamps to attach to a drill, or they reposition the chain so you push the mower around to make the blades go backwards and sharpen themselves). My blades were pretty dull, so I had to do the process twice before they would cut strips of paper. Sharpening your own reel mower's blades is certainly do-able, though you may have a learning curve like I did that involved attending a bit of The University of YouTube on the subject. It may seem like a lot of money for a handle, a paintbrush, and some lapping compound, but the handle is made for my particular mower by Fiskars, and it was convenient to wait a few days to get everything I needed in one box rather than have to run to three different stores.I have heard that the lapping compound may dry out if you don't seal it up well; I put it in a ziploc bag and hope that'll do the trick.Another tip: put some newspaper down to catch splattered lapping compound, wear clothes you don't care about, and wear eye protection for sure. I also wore some hearing protection, as the scraping sound is pretty loud and harsh. I also took the opportunity to clean and oil / use BreakFree CLP on the chain and other moving mechanicals on the mower.My mower is now sharp and properly adjusted, and does a great job. I like that I am holding out and using my body to drive the mower instead of stinky, dangerous fossil fuels, and making a loud noise in my neighborhood. I can't imagine an electric mower doing a better job than my properly-maintained Fiskars reel mower.
Productos recomendados
Mex $915.98
Mex $ 457 .00 Mex $457.00
Mex $714.00
Mex $ 385 .00 Mex $385.00
Mex $881.90
Mex $ 449 .00 Mex $449.00