No hay artículos en el carro
No hay artículos en el carro If you have a SLR or DSLR camera and other maker/mount lenses, the Fotodiox Mount Adapters allow you to use your lenses on the film/digital camera body. Sharing lenses has some distinct advantages. Certain prime lens just can't be replaced, and you save the cost of purchase on new lenses. Fotodiox offers a range of adapter from large format to smaller format digital adapters. Adapting larger format lens to smaller format sensors (i.e: large format to medium format, medium format to 35mm, 35mm to micro 4/3) provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle.
This Fotodiox Lens Mount Adapter, is made with high standard precision. Its all metal design and polished surface is designed to guarantee smooth mounting and long lasting experiences. It allows C-Mount Lenses to fit on a Sony Alpha NEX E-Mount system camera body.
Although the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body. You can shoot with manual mode or aperture priority mode. Infinity focusing is allowed.
Compatible Cameras (Including, but not limited to): Sony Alpha a7, a7r, NEX-3, NEX-5, NEX-C3, NEX-5N, NEX-7, NEX-F3, NEX-5R, NEX-6, NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900, NEX-FS100, NEX-FS700, NEX-EA50
Actual product packaging and contents may differ from image shown due to packaging or product updates by manufacturer.
NOTE: This adapter will NOT fit on the Sony a7S, a7 II, a7S II, and a7R II.
Carmen
Comentado en España el 14 de febrero de 2025
La calidad de los componentes no llega a convencerme. La rosca encaja pero no con suavidad, si vas a ponerlo y quitarlo a menudo da la sensación que se desgastaría un poco la montura.
Jack Dunham
Comentado en los Estados Unidos el 2 de diciembre de 2016
Adaptor worked great, its al metal and slides into a little side pocket on my case.
vjjft
Comentado en los Estados Unidos el 10 de diciembre de 2015
The item is as it should be: a simple metal adapter machined well.The product description should note the vignette (instead of starting with "The smaller image field ... the larger lens image circle."If looking to use with a microscope, I highly recommend
fuzzy
Comentado en los Estados Unidos el 18 de agosto de 2013
I bought this product to attach a c-mount lens to my NEX-6 ... works perfectly ! The lens shows a bit of vignette due to the smaller image circle than that required by the Sony. All metal and very well made. Fotodiox makes a quality product ( I own several).
Adam
Comentado en los Estados Unidos el 9 de noviembre de 2013
This adapter is well made. All threading was perfect. It's a simple plate, really. I have an NEX-6 body that I wanted to connect to a few different microscope systems at work. The C-mount and T-mount are most common. The standard mounts used to connect Carl Zeiss Axiocams is a C-mount. I threaded this onto the microscope port first, then carefully mounted the NEX body onto the adapter plate. Without any tinkering, the camera produced exceptional results... in my situation at low power objectives, the resulting images were sharper than with the $12000 Axio HRc camera. They were more true to what you actually see through the eye pieces. This mount also worked very well with an Olympus IX50/IX70 base platform for a custom laser dissection system we have. Again, minimal tinkering, just mount plate to scope port, mount camera, set 100ISO and adjust metering using the camera... the NEX takes care of the rest. Really brilliant setup.A couple things to note if you're in a similar situation w/telescope or microscope:1. mount the plate to the C-mount port first. The threading on the 25mm C-mount is thin and could be awkward when mounted to the NEX first. I found mounting the body to the adapter was very solid and easy to do. Just line up the dots.2. Vignette... it's big. You're basically just getting a circle within the frame of the NEX's field of view. This is totally normal for directly mounting a C-mount setup to NEX (or any APS-C or larger sensor). For a $16 solution just crop it. If you'd like to fill up the sensor more, you would need a 2x adapter between the microscope port and the camera body. If you contact Zeiss for the mounting hardware for an NEX, they'll sell you T-mount stuff, but include a very expensive 2x optic to magnify the image onto the comparatively larger APS-C sensor. A FF sensor on a camera like a 5D or a new Alpha 7 mirrorless will require a 2.5x adapter. These exist on Amazon as well (but not with high quality glass). I bought one for $100 and will test it soon.Summary: It's a $16 solution to get incredibly sharp images right away off of a C-mount port without the need for anything else. It's a fantastic bargain and I highly recommend it.
Productos recomendados
Mex $311.10
Mex $ 152 .00 Mex $152.00
Mex $32.99
Mex $ 17 .00 Mex $17.00
Mex $385.00
Mex $ 207 .00 Mex $207.00