Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

GeeekPi Módulo de placa de relé de 4 canales para Raspberry Pi, módulo de relé de potencia para Raspberry Pi 4B y Raspberry Pi 3 Modelo B+ y Raspberry Pi 3/2 Modelo B (no requiere

Envío gratis en pedidos superiores a Mex $600.00

Mex $359.99

Mex $ 197 .00 Mex $197.00

En stock

Acerca de este artículo

  • Compatible con Raspberry Pi 3A+/B+/2B/3B/3B+/4B/Pi Zero/Pi Zero W, Arduino UNO R3 / MEGA 2560 / STM32/ESP32/ESP8266
  • La placa de relé le da a tu placa Raspberry Pi la capacidad de controlar dispositivos de alto voltaje/alta corriente, y fácilmente hace que los electrodomésticos normales se vuelvan inteligentes. Se puede acceder mediante programación o directamente por shell
  • Se pueden apilar hasta 4 capas. El relé de 4 canales utiliza módulos de relé de alta calidad combinados con la tecnología de microcontrolador más popular para comunicarse con el Raspberry Pi.
  • Puedes utilizar módulos de relé múltiples apilados juntos para añadir muchos canales
  • El módulo de 4 canales es muy rápido, fácil de instalar y admite el desarrollo multilingüe, por lo que es ideal para proyectos de hogar inteligente.


Descripción
Tablero del sombrero del relé de 4 canales para Raspberry Pi es uno del módulo "docker pi".
Cuenta con relé de 4 canales que puedes ponerlo en tu proyecto de casa inteligente.
Este relé de cuatro canales utiliza módulos de relé de alta calidad combinados con la tecnología de microcontrolador más popular para comunicarse con la Raspberry Pi.
Puede utilizar varios módulos apilados juntos para su uso.
Puede apilar hasta cuatro capas.
Cambie la dirección I2C del dispositivo a través del interruptor DIP en la placa de circuito para asegurarse de que el módulo de cuatro capas obtenga direcciones diferentes, evitando así el problema de duplicación de direcciones.
El módulo es muy rápido, fácil de instalar y soporta el desarrollo multilingüe, lo que lo hace ideal para proyectos de hogar inteligente.
PD: El pin 4pin es una copia de seguridad que suministra energía a futuros productos. Puedes ignorar esos alfileres. Por favor, no conecte ningún dispositivo a esos pines.
Características:
Fácil de usar.
Relé de 4 canales
Protocolo I2C de la ayuda
Soporte para apilar
Soporte de conmutación de dirección por interruptor de marcación
Soporte de programación multi-idioma
Compatible con 3 A 250 V CA.
Compatible con 3 A 30 V CC.
Soporte de luz de estado de relé
El paquete incluye:
1 x 4 canales Relay Hat Board
4 varillas de cobre M2,5 x 11 + 6.
8 tornillos y tuercas M2.5x5.
1 manual de instrucciones.
Wiki:
https://wiki.52pi.com/index.php/DockerPi_4_Channel_Relay_SKU:_EP-0099


paz attar
Comentado en los Estados Unidos el 2 de enero de 2025
These hooks are the best crochet hooks I own. They’re smooth, the yarn never snags on them and the best part is they don’t hurt my hands. Because the handles have different colors, it’s easier for me to remember what size they are instead of looking for the size number on the handle. Love them.
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Dave the MMP
Comentado en Canadá el 6 de abril de 2025
Used this for my Pi 4 to turn on my bilge pump on my boat, running Venus OS
Annie_Way
Comentado en los Estados Unidos el 29 de octubre de 2024
I bought a set of the regular Clover hooks (the non-thick yarn ones) and loved those, so when I ventured to crochet some blankets with thicker yarn, I knew I had to get Clover hooks in larger sizes as well.The crochet hook itself is a different material than the smaller ones (aluminum). It feels kind of plastic, though it's just as smooth and the rubber handle is just has ergonomic. I hold my crochet hook the knife way, and I do wish it were slightly longer, but it still feels good in my hand. Overall, I think Clover is a great industry standard crochet hook with no frills.
Está muy padre la mochila y súper amplia
Comentado en México el 18 de octubre de 2024
Me encantaron, apenas me llegaron y ya me encantaria usarlos en un proyecto, están muy ligeros
caroline stimson
Comentado en el Reino Unido el 12 de enero de 2024
Very comfortable and glide through stitches. Was a present from hubby for Christmas..not used all sizes yet..but very impressed so far.
Jesika Marlene Coronado Gutierrez
Comentado en México el 24 de marzo de 2023
Se teje fabulosamente con estos ganchos, son ligeros y su feliz es muy bueno, no duelen los manos. Yo los recomienda ampliamente 😊
Violeta
Comentado en México el 24 de marzo de 2023
Son muy cómodos para tejer, con estos logro emparejar el punto. Me encantan
Angélica Gatica garza
Comentado en México el 4 de diciembre de 2023
Muy buen artículo para crochet, liviano
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
Markus Gutschke
Comentado en los Estados Unidos el 1 de diciembre de 2023
This board is unique in how it uses a shared I2C to communicate with the relays, instead of eating up precious GPIO pins. It is possible to stack up to four of these boards without needing any additional pins. That's a very valuable feature. It also means that driving the relays from C, Python, or even just the shell is trivial. Highly recommended.Note: While I love the flexibility of having both N.O. and N.C. contacts for each of the four relays, I find the labeling on the connector to be confusing. Make sure to measure connectivity with a multimeter before wiring up the terminal block.
anna
Comentado en Arabia Saudita el 10 de octubre de 2023
can get them in the airplane without problem especially the large ones
Alejandro Ibarra
Comentado en México el 15 de junio de 2022
Envío rápido y producto de calidad
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
IT Man
Comentado en el Reino Unido el 26 de septiembre de 2022
Works as expected, thanks
Jenni
Comentado en el Reino Unido el 17 de julio de 2021
When I saw the picture on amazon I expected them to be like others in that style, but I needed the larger size hooks so decided to buy them although they seemed expensive at the time I was fed-up with the cheaper version's with rough areas on the hook that causes drag and noise. These hooks are so light and smooth I seemed to go faster, they were a joy to use. I recommend 👌 these hooks they are worth every penny you will not regret buying them.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
MaZonePro
Comentado en Francia el 30 de abril de 2021
Mise en oeuvre simple.Plusieurs modules empilables.
5of9
Comentado en Alemania el 24 de abril de 2021
Ausgezeichnet, man kann per i2c jedes Relais einzeln steuern und abfragen. Bei den günstigeren Alternativen mit pcf8574 und nicht mit Microcontroller wie bei diesem Produkt ist die Steuerung deutlich aufwendiger! Werde mir gleich noch 2 bestellen.
Productos recomendados

Mex $511.49

Mex $ 260 .00 Mex $260.00

4.5
Elegir