No hay artículos en el carro
No hay artículos en el carroEste driver Goldwood Sound de 8 ohmios de 10 pulgadas tiene una potencia máxima de 400 vatios y está diseñado y diseñado aquí en los Estados Unidos. Este subwoofer cuenta con un imán de 40 onzas con placa de parachoques, pieza de poste ventilado, envolvente de goma y cono de poli-mica. Este subwoofer es un transductor de audio profesional de alta gama optimizado para todos los instrumentos musicales, DJ, audio de coche y aplicaciones profesionales.
rob
Comentado en Australia el 15 de marzo de 2025
Have tried many cheaper (and supposedly better) bass drivers to replace my tired old Monitor Audio subs and these things fill the bill amazingly well. Very clean sounding and capable of moving some pretty hefty bottom end. More so than the original drivers which were quality products. Just buy them folks, brilliant value…!!!! 😊👍
Steve Forbes
Comentado en Canadá el 25 de febrero de 2025
All your speakers are designed WRONG! Connectors are either too close to opening, or facing the wrong way and the 6.5s don't even fit the opening. RIDICULOUS!
Bill Martin
Comentado en los Estados Unidos el 4 de marzo de 2023
I needed a sub woofer speaker to replace the one in my unit. I was unable to find one with the same shape mounting flange and gambled that I would be able to alter the cabinet and use this one. I was able to reshape the mounting area and although a very close fit, I was able to get enough surface area for the mounting screws. Only reason for only four stars in "Easy to install" was due to having to take time to remodel and the possible chance of ruining my Boston Accoustic sub woofer cabinet. Not Goldwood's fault, everyone's for not making a similar flange.Once all of that was done and it was fired up it sounded great. No buzz or vibration and I'm not positive, but I believe it actually sounds better than the original Boston Accoustics speaker. Very pleased with the outcome: great price, quick delivery and successful remodeling.
Ricardo P.
Comentado en México el 9 de junio de 2022
Compre un par de estos sub wofeer, uno 100% bien el otro con un pequeño detalle, Al presionar el cono tenia un leve sonido como de una limadura o pegamento en la bobina y el entrehierro, Lo conecte a un amplificador para oír como sonaba (BIEN) Y después lo desconecte presione el cono y ya no tenia el leve sonido. Su desempeño lo veré mas adelante.
Johnny Guitar
Comentado en los Estados Unidos el 28 de junio de 2022
Easy drop in replacement with no cabinet modification required on Infinity SM-102.These woofers have polypropylene cones, as did the originals.Power handling at 140W RMS is similar to the original cab spec of 150W RMS.The new woofer’s frequency response reaches lower frequencies (36 Hz) than the original (65Hz) and this contributes to a little bit deeper/more bass than the original. It’s not a lot and a minor adjustment to the amp’s bass control can easily adjust for it, but it’s not really required to adjust it. Probably also the construction and voicing contribute to the increased bass.Playing one speaker with the new woofer and one with the old, I could discern no volume difference across a wide range of amplifier volume settings. I expected to hear some as the cabinet was originally rated at 100db sensitivity while this woofer is rated at 94db. But I could not hear a volume difference between the old and new woofers volume side by side panning between them.This woofer has a frequency response up to 5khz, so is suitable in the SM-102 with the 3.3kHz crossover point. ( frequencies above 3.3 kHz get passed to the tweeter)The old speaker used spade lugs while the new speaker has posts for bare wire insertion so you do have to clip the old spade lugs off the wiring harness.I think these replacements are higher quality drivers than what was original to the cabinet.I’m very pleased with this speaker as a direct drop in replacement at a reasonable price point. Delivery was next day with Amazon prime. It took me all of 15 minutes to replace both woofers.They are somewhat heavier due to a larger magnet, which adds probably a couple of pounds per speaker.See before and after photos.The other option is to have them refoamed by a pro, or to buy the kit and do it yourself. Getting them refoamed is about $45-$50 per speaker based on a couple quotes I got, plus any shipping cost. The DIY kits are around $25-$30. You can buy kits with infinity center caps from Midwest Speaker Repair. They are also an authorized infinity repair shop, and they can do the work for you. ( I am not affiliated)I opted for the immedate fix of these goldwoods, but I may still ship the originals in for refoaming.
Scott Gibson
Comentado en Australia el 13 de noviembre de 2022
Replacement Woofer for Yamaha sub woofer, thie speaker works very well.
Productos recomendados
Mex $1,717.00
Mex $ 721 .00 Mex $721.00
Mex $2,118.37
Mex $ 932 .00 Mex $932.00
Mex $970.00
Mex $ 465 .00 Mex $465.00