No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Capacidad de carga resistente
Construcción extra resistente con impresionante capacidad de carga de 5 kg por eje. Fabricado con goma termoplástica de grado comercial resistente, evita que los cables se dañen por el tráfico a pie y los vehículos presentes en un entorno de trabajo ocupado.
Diseño fácil de usar
Los canales dobles de 3,8 cm de ancho x 3,8 cm de alto son accesibles por una tapa de PVC abatible y están diseñados para proteger una variedad de cables de hasta 3 cm de diámetro, lo que permite al usuario una flexibilidad total para localizar y fijar cualquier cable suelto independientemente de la dirección. Simplemente abre y presiona hacia adentro.
Conexión sin esfuerzo
El diseño modular único hace que sea fácil conectar múltiples rampas juntas para abarcar longitudes de cable más grandes. Su funcionamiento simple hace que sea adecuado tanto para uso comercial como doméstico. Limpio y discreto cuando se despliega en el suelo.
Diseñado para la seguridad
Tapa amarilla brillante, muy visible tanto de día como de noche, evitando accidentes innecesarios de antemano. Este protector de cable también tiene un bajo humo, no tóxico y un bajo nivel de emisión de humos y no libera gases nocivos de cloro en entornos de sobrecalentamiento.
Estabilidad de adsorción inferior
La base posee una fuerte estabilidad y se adhiere al suelo firmemente, eliminando preocupaciones sobre las líneas de manguera abultadas, pellizcando cables eléctricos y aplastando el cableado en áreas de trabajo de alto tráfico. Elegantes bordes inclinados para facilitar el paso de carritos, carritos y sillas de ruedas.
Amplia aplicación
Perfecto para cables de alimentación, cables de red, etc. Especialmente adecuado en lugares públicos como parques infantiles, lugares, eventos deportivos, salas de exposiciones, locales minoristas, plazas, aplicaciones temporales de emergencia, así como uso doméstico y de oficina.
Especificaciones:
Color: Rampa negra y tapa amarilla
Materiales: PVC y goma
Capacidad de peso: 5 kg/eje
Dimensiones del canal: 3 x 3,5 cm
Dimensiones del producto: 101,6 x 25,4 x 5,08 cm
Temperatura de funcionamiento: -40 ~ 55 °C
Dimensiones del paquete (largo x ancho x alto): 103 x 29 x 14 cm. Peso bruto: 40 libras
Lista del paquete: 3 protectores de cable de 2 ranuras
- Resistente y duradero
- Cableado sin problemas
- Diseño de seguridad
- Estructura mejorada con estabilidad
Rampas protectoras para cubierta de cable de 2 ranuras
Rampa protectora de cable de doble canal diseñada para proteger y asegurar cables, evitar accidentes ocultando cables de riesgo de tropiezos que se arrastran a través de pisos con un diseño de perfil bajo.
Acabado suave, limpio e inodoro, resistente a la abrasión y no se decolora con la luz solar. Los protectores de cable Snap Fit son ideales para transportar uno o más cables en muchas combinaciones dependiendo de la aplicación, lo que permite al usuario una flexibilidad total para localizar y fijar cualquier cable suelto independientemente de la dirección.
- Atención:
- Al igual que todos los productos hechos en goma, a veces puede haber un olor a gases ya que estas unidades son nuevas.
- Este olor se disipará en el tiempo (pocos días a unas semanas). Te recomendamos que los airees al aire libre antes de colocarlos en interiores.
Customer
Comentado en los Estados Unidos el 10 de abril de 2025
heavy and tough. work well!
Di
Comentado en los Estados Unidos el 2 de abril de 2025
They work great and sturdy
Osvaldo Ostiguin Pineda
Comentado en México el 25 de mayo de 2024
Buen producto cumple con la descripción y funcionamiento
OCTAVIA HERNANDEZ GARCIA
Comentado en México el 7 de marzo de 2024
bueno y robusto
Guillermo Avila
Comentado en México el 29 de enero de 2024
Excelente producto me llegó rapidimo
Jeanette M.
Comentado en Australia el 3 de septiembre de 2024
3 pieces, all as described.
GAMA70
Comentado en México el 4 de abril de 2024
Perfectamente bien construidos, y es una opción de excelente precio y de muy buena capacidad en sus canales
litji
Comentado en los Estados Unidos el 17 de marzo de 2023
This was a good price for this item. it's fairly heavy, so I think it will protect the cables well. My only unknown is how it holds up to the test of time (and sun exposure here in So California). Hopefully they are durable.
Customer
Comentado en México el 11 de septiembre de 2023
Excelente compra …
José arturo
Comentado en México el 28 de diciembre de 2022
Excelente producto
Chris Boylan
Comentado en los Estados Unidos el 29 de abril de 2022
I've owned an EV for 4 years (Tesla Model 3). Because my property has an easement (a right of way for my neighbors to drive to their properties), it's tricky to charge my car. My parking spot is about 25 feet from my house. So I need to run the charging cable to the car from the house over the easement. I've tried a few different cord covers in the past, but they haven't held up that well over time - they move around too much or have simply worn out after repeated crossing of my neighbors' cars.This set of cord covers from Happybuy appear to be much sturdier than my earlier choices. Also, the fact that this cover is a bit of a ramp slows down one particularly nasty neighbor who liked to drive over my cord cover at high speed, inflicting as much damage as possible. She tried that once with the Happybuy cover in place and probably smacked her head into her car's ceiling (sorrryyy... NOT!). That slowed her down.Anyway, the HappyBuy cord protector ramps install easily, fit together well and have plenty of space for an electrical cable even thicker than my current 20 amp/12 gauge extension cord. You could easily fit a garden hose in one of the two channels. The only issue is that they do slide ever so slightly after repeated car crossings. I've just nudged them back in place with my feet, but I will probably use a bit of construction adhesive underneath them in order to anchor them more securely to the cement driveway.Will post an update if they develop any problems over time, but so far, so good.UPDATE (February, 2023): Well that nasty neighbor struck back. She started revving up her car to a high speed and slamming the breaks when on top of the cord cover in order to force them to slide, thereby causing the covers to separate and exposing the cables inside. I have Ring camera video footage of it. It's actually kind of humorous to watch. Some people must have very sad lives. Anyway, I tried a couple of different construction adhesives, but all required over a day to set, and none of them held the covers in place for long. My ultimate solution was to use Tapcon concrete screws to hold the cord covers in place on my driveway.By the way, after melting a couple of the "titanium coated" Tapcon bits, I discovered that these mortar bits work *much better* when you use an impact drill, as opposed to a regular drill. The impact drill allows the Tapcon mortar bit to drill through concrete and cement pretty quickly without melting. I also poured a little water into the holes to keep the bit cool. Once I secured the cord covers in place with the Tapcon screws, they stopped moving entirely. Several months later, they are still firmly in place. This does make it a little more difficult to do leaf and snow cleanup (since I can't move the covers now) but the power cable is well protected, which is the important thing.Happybuy Cord Protectors (with Tapcon screws): 1 - Nasty Neighbor: 0
Nick
Comentado en Australia el 3 de abril de 2021
Will review after I have used. When unpacked rattles when put back together.
Adrian T.
Comentado en Singapur el 6 de noviembre de 2020
Save your money for something better. Made in China. Even has Cancer and Reproductive Harm labeled on it.
Ana
Comentado en México el 20 de enero de 2020
Dice claramente que el exterior incluye sustancias cancerígenas, no lo recomiendo.
Hugtome
Comentado en México el 12 de agosto de 2019
terminados geniales, buen tiempo de entrega
Heriberto
Comentado en México el 12 de junio de 2019
Se siente buen producto 👍Tiene un grosor adecuado, aunque aún no lo válido en una salida y enfrente el ser guardado en mochila y aguantar caídas y golpes
Edgar Alanís Gzz.
Comentado en México el 10 de marzo de 2019
Se lo regale mi sobrino lo usa para sus salidas con los boy scouts quedó fascinado buen set de cocina personal
E. B.
Comentado en Canadá el 22 de diciembre de 2017
I used this product about 5-10 times a year and have had it for about 3 years.Pros :- Quality is really good for it's price.- Resistant to heat since I put it over campfires- Versatile, you can make a variety of meal and hot beverages with thisCons :- It is kind of limited in size, suitable for one person
Lost Caper
Comentado en Canadá el 2 de marzo de 2016
Reviewing the Stan Sport 360 Stainless Steel Mess Kit. March 2,2016In summaryIt is a great light weight, compact stainless steel backpacking mess kit that is good to feed one person.For those who like to read more:The Stan Sport 360 is a perfect match for my j-creater portable stainless steel outdoor camping wood & alcohol burning stove. The size of the mess kit fits perfect on my stove allowing me to cook with confidence that it is not going to tip over. The copper bottoms on the mess kit heats up quickly so a hand full of wood cooked my breakfast by the river’s edge.Packs size and weight:The pack size is 7”’X 3” (17.78cm X 7.62cm)It nests inside itself and the handle on the frying pan is hinged so it folds over the nested kit and locks in place holding everything snuggly together.It is light to carry at only 567 grams. Go with stainless steel when you can. Stainless is a few bucks extra and a few extra grams heavier over aluminum, however it is not noticeable in my pack or in my wallet. Cooking with aluminum can have serious health repercussions.Materials and quality:It is made of stainless steel with a copper bottom. The copper bottom allows it to heat up quickly and distributes that heat evenly. Using it with my j-creater portable stainless steel stove, I boiled water in less than 4 minutes. Another 15 minutes or so cooked my eggs and bacon to perfection.I read where one person said “ I warped mine a bit “ . No-one else that I know of had a problems not to say there isn’t any. After using it several times, my guess is if you do not have it on a roaring fire exposed to extreme heat, it should not warp. A perfect cooking heat is a heat you can hold your hand over for a few seconds. I personally had it exposed to the direct flames of hardwood to boil water and it never warped. This is not to say giving it that kind of abuse will not warp it.I like the fact that the handles are stainless and not nylon or plastic. This way, I need not be concern with melting handles. The stainless steel handles do not get extremely hot if not exposed to high heat. To be safe, I use a cloth when picking it off the hot fire. The bacon smells to good to drop on the ground.I would off like some sort of a removable handle on the dish but overall with the great fit & finish, great price and all things considered, I would give it a thumbs up for quality and for being a great buy. Having said that, I included it in my handpicked reviewed items on our Lost Caper store at Amazon linked to my lostcaper.ca site.P.S. This week I plan on doing a “finish boil” of maple syrup in the pot so that will be the real test.ThanksRay & Jimmy at LostCaper.ca , March 2,2016March 2, 2016
DSA
Comentado en los Estados Unidos el 4 de enero de 2015
This mess kit is pretty amazing for $20. I've owned a lot of mess kits over time (Swedish mess kits, USGI kits, East German kits, and various Coleman kits) and most have been cast aluminum, which gets the job done but has the tendency to stain badly and after extended use, gets harder and harder to clean.This kit though is made of stainless steel with a light copper plating on the bottom of each piece of kit. I don't know what gauge stainless steel it is made from but it feels VERY sturdy and is also EXTREMELY lightweight, The Copper plating on the bottom of the pans has been done excellently. For $20 you almost expect it to be cheaply done. This kit however looks like the pieces were assembled with a great attention to detail. The spot welds that old the handles on the pan are very well done as well.It looks as if they were pressed then welded then brushed up. The screws on the pan lid are tight and sturdy, and the handles on the pot are slotted so it doesn't spill when you pick it up but when your done the handle easily folds down and away. Very well made and thought out design. Again, this is a $20 kit I would have gladly paid more for in a store based solely on its build quality.On a camp stove all the items heat up evenly. The copper allows for more even heat distribution which allows for faster cooking and more evenly cooked foods. Cleanup is also SUPER easy as the pans simply wipe clean. Also, depending on the gas flame or open flame, you can get a bit of soot buildup. This is normal. This post cleans easier in that aspect too. After 3-4 uses it's still holding up fine. The plating is as well. I think this kit is DEFINITELY worth the money. Plus it comes with a small carry bag which I totally didn't expect but is very useful and a nice touch. I might buy a few more of these just to have/give as gifts to my camping pals.
Productos recomendados
Mex $401.92
Mex $ 188 .00 Mex $188.00
Mex $366.17
Mex $ 194 .00 Mex $194.00