Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

HULKFIT Elite Series 3' x 3' Power Cage Rack Attachments and Accessories

Envío gratis en pedidos superiores a Mex $600.00

Mex $687.31

Mex $ 350 .00 Mex $350.00

En stock

1.Nombredeestilo:Almacenamiento De Barras Horizontales


  • Propósito: hemos diseñado este dispositivo de almacenamiento como un accesorio para la jaula de alimentación de la serie Elite, que cuenta con postes verticales de 3 x 3 pulgadas con agujeros de montaje de 1 pulgada. Esto almacenará tus platos de forma segura en las proximidades para que puedas cambiarlos rápidamente y volver al entrenamiento sin romper el ritmo.
  • Uso: uso solo en postes verticales de 3 x 3 pulgadas. Recomendamos colocar tu soporte de placa de peso en el exterior de tu estante o jaula. Esto es para mantener tu espacio de entrenamiento última intervensión de desorden y para ayudar a prevenir posibles lesiones.
  • Materiales: acero negro con recubrimiento en polvo de bajo brillo.
  • Contenido del interior: (1) soporte para placas de peso
  • Especificaciones del producto: el soporte de placa de peso es de 15 x 5.4 x 3.5 pulgadas con brazo de 2 pulgadas de diámetro. Longitud del brazo: 28,6 cm. El peso total del producto es de 4.5 libras. Capacidad de peso: 200 libras.



Más información del producto

Estante para sentadillas con jaula eléctrica de la serie Elite

Marco de acero con recubrimiento en polvo

Construcción de rack resistente

Cuenta con un marco de acero con recubrimiento en polvo con la capacidad de manejar hasta 1200 libras, mientras que un montante de 3 x 3 pulgadas proporciona una mayor estabilidad.

Construye una resistencia duradera

Construye una resistencia duradera

Los brazos Jammer o Palanca están diseñados para darte la capacidad de trabajar todo tu cuerpo en un simple accesorio. Se pueden mover hacia arriba y hacia abajo en los postes verticales dependiendo de la parte del cuerpo que quieras entrenar.

Enganchado en el gimnasio en casa

Enganchado en el gimnasio en casa

Los ganchos J vienen en pares y son una necesidad para el entrenamiento de fuerza en cualquier configuración de gimnasio en casa. Mantén tu barra atormentada y lista para sentadillas, prensas de banca y mucho más

Listo para la batalla

Listo para la batalla

Puedes lograr un gran entrenamiento cardiovascular con el ancla de cuerda de batalla. Una vez conectado al poste vertical, simplemente enrosca tu cuerda y estarás listo para la batalla.

Soportes para pesas y placas de peso

Guarda tus barras verticalmente, expande tus horizontes y vale la pena su peso en oro

Tan simple como esto puede ser, es necesario tener barra y placa de peso almacenamiento en tu gimnasio en casa. Ahorra espacio y tiempo. El tiempo que ahorras es del potencial de lesiones debido a la caída porque la configuración de tu gimnasio está desordenada.

Mantente organizado y fuera de la "pila herida".

Logotipo de corte láser HULKFIT

Enfoque láser, grabado en acero

Cada vez que compres nuestra jaula de alimentación de alta calidad o soporte para sentadillas, puedes asegurarte de que es nuestro producto con el logotipo cortado con láser. Esto nos ayuda a saber quiénes son los productos reales HULKFIT en comparación con los imitadores y imitadores baratos.

Espacio de 1 pulgada

Espacio de 1 pulgada – altamente funcional, siempre ajustable

El sistema de numeración de corte láser te da la capacidad de mantener los accesorios nivelados. Cada agujero de montaje es de 1 pulgada y están separados de 1 pulgada, similar al espacio Westside. Nota: estos accesorios de la serie Elite pueden caber en cualquier otra jaula o estante de alimentación de 3 x 3 pulgadas con agujeros de montaje de 1 pulgada.

Elite Series Lat Pulldown

Lattitude

Construye lats fuertes y una espalda fuerte con esta increíble máquina desplegable. Puedes cargar hasta 300 libras dependiendo del grosor de las placas de peso.


Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Leslie Stone
Comentado en los Estados Unidos el 9 de mayo de 2024
So we aren’t technically using this correctly, it’s supposed to attach to a rig, which it would do perfectly, but we just needed our barbell (women’s Olympic bar) off the garage floor. We ended up attaching it to the wall along with the JNIHEEP Olympic barbell hanger. We wanted to be sure our children couldn’t snatch it off the wall and it has kept the barbell securely on the wall for months now.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Pirate
Comentado en los Estados Unidos el 14 de mayo de 2024
Do NOT by this lat pull down attachment. It's warrantied for 2 years, but after 9 months of frequent use, the bars for the weightplates bent. I contacted customer support who initially promised to replace the defective part, however, it was sent to another team for evaluation. They said, "Such damage typically occurs when the lat pull down is repeatedly dropped from its highest point. We have tested this unit extensively and have not observed this level of damage under normal circumstances.". I have purchased all my own equipment for my home gym and I don't maltreat my stuff as I want it all to last for years. Indeed all my other equipment has lasted for years and I have never dropped the lat pull down repeatedly from max height nor have I used it beyond its weight capacity of 300 lbs. Just a company excuse to not stand behind their product. Do NOT buy this lat pull down. Faulty bars and the company won't honor the warranty. Also the bars are actually only one inch with sleeves to put over them for Olympic weights. Bad design too and beyond terrible customer service, especially after they said they would send new parts. Needless to say, I'm never buying anything from HulkFit again.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Joseph M.
Comentado en los Estados Unidos el 16 de marzo de 2023
The first set of Jammer Arms I received had a defect where the holes were misaligned so the pins that hold the handles onto the arms did not match up making the units unsafe to use. Hulkfit customer service exchanged the defective units quickly.The new Jammer Arms work great, and my only complaint is that the weight posts are slippery, so much so that I need to use collars to keep the plates safely on the posts.I'm using these on a Marcy 4033 cage and they attach securely.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Matthew Armentrout
Comentado en los Estados Unidos el 1 de julio de 2022
Update: I reached out to Hulk Fit directly via their website and they responded quickly. They found the parts that I am missing and are replacing them at no charge. As I said - I’ve never had an issue with Hulk before and this solidifies that statement even more. The pieces I do have feel of good quality and I love the number cuts in them. Excited to put it to use!Original: Seems like a good product and I’ve not had issues with Hulk before but no way of knowing if the product is good since I don’t have the parts needed to put it together. I am missing both pins (part 3). I am missing 1 of the 2 mounting brackets that the arms attach to. I am missing 1 of the 4 end caps that go on/in the arms.
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Lisa Raudenbush
Comentado en los Estados Unidos el 9 de diciembre de 2022
WOW... The stock pictures do not show how nice these are.I took a chance on these j hooks based on the pictures I saw from another user. I'm glad I did. Got them for ~$30. WOW. I am very impressed. Solid steel, for 1 inch holes and 3x3 with protective coating throughout the inner hook to protect expensive Barbells. They are heavy and sturdy. This flat back style j-hook is easy to use when lifting heavy.Almost spent 3 times more for 3x3 j hooks from the big brands, glad I didn't waste my money. At this price, get 2. They fit perfectly and have a ~1/16 inch gap when sitting on your rack, between the j-hook and rack, so it won't scratch your rack. Could not be happier. Thanks Hulk Fit
Productos recomendados

Mex $29,347.79

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir

Mex $5,454.90

Mex $ 1,881 .00 Mex $1,881.00

4.4
Elegir

Mex $5,553.17

Mex $ 1,881 .00 Mex $1,881.00

4.9
Elegir

Mex $18,099.00

Mex $ 1,881 .00 Mex $1,881.00

4.4
Elegir

Mex $1,183.44

Mex $ 532 .00 Mex $532.00

4.7
Elegir

Mex $291.08

Mex $ 145 .00 Mex $145.00

4.7
Elegir