No hay artículos en el carro
No hay artículos en el carro Esta herramienta requiere un compresor de aire para usar.
Características:
✅ Cabezal inflador de selección automática que funciona con válvulas Presta y Schrader.
✅ Una manguera larga y resistente de 18 pulgadas.
Calibre preciso con rango de 0-200 psi (0-13,5 atm)
✅ Botón de presión de purga integrado.
✅ La palanca de presión permite un flujo de aire lento o rápido.
✅Enchufe rápido NTP de 1.4 pulgadas para conectar con tu manguera de compresor.
Uso:
✅ Neumáticos de bicicleta de carretera tanto de tubo como sin cámara
✅ Neumáticos MTB tanto de tubo como sin cámara
✅ Neumáticos de bicicleta de grasa tanto de tubo como sin cámara
✅ ATV, motocicleta, coche, camión o cualquier otro neumático o tubo con válvula Presta o Schrader.
Nota importante para uso de ATV, motocicleta, coche o camión: se requiere una distancia de 1/2 pulgadas alrededor del vástago de la válvula para que la cabeza se ajuste
Joseph D. Noteboom
Comentado en los Estados Unidos el 30 de marzo de 2025
I just bought a nice Specialized Sirrus 5.0 and it is my first bike with Presta valves. I wanted a nice accurate gauge to go with it so I purchased this one. It works flawlessly with both Presta and Schrader valves. Don’t believe the review that said otherwise. I doubt they understood how to prep the Presta valve prior to pumping. What really impressed me was the fact they included nice Energizer batteries with the gauge. It also came with a nice little case of spare parts and a couple of Presta valve caps that came in handy, as my bike didn’t have them yet. Great instruction sheet as well.
Alex
Comentado en Canadá el 20 de agosto de 2024
I rarely leave reviews, however, this one hit the mark. It came with quality energizer batteries and hooked up to my compressor without any modifications. The inflator seals well on my bike (presta), as well as shocks and car (schrader). The extra presta valves and aluminum caps fixed my two main issues with loosing air (bad seal and plastic caps falling off). The rubber protector for the gauge is a nice touch, build quality feels good, it should last a long time.If I had gone out and purchased each item individually, I would have been looking at double the price. Overall this is a great product that does exactly what I need.
Laurel Brewster
Comentado en Canadá el 27 de diciembre de 2024
When I bought this I was convinced by the reviews that I would have to replace the valve head with an alternate unit. Many reviews say the head does not engage properly with presta valve stems. However, it worked perfectly right out of the box and seals perfectly every time. Very happy. I use this pump at least twice a week for both a mountain bike (low pressure) and a commuter bike (70-120psi). I think that some of the disappointed reviewers might not fully understand how presta valves work. In particular the nut at the top of the valve stem that you have to unscrew before attaching the pump. Whatever the case I'm happy to say my experience has been positive. Have been using for several months.
Mark Wilkinson
Comentado en Australia el 31 de enero de 2024
Very happy with this tool. The digital pressure gauge turns on automatically when connected to an inflated tyre and reads quite accurately. The valve attachment clamps onto the valves quite well on both Presta and Schrader types. Note that in Australia you will probably need to change the male coupling that attaches the inflator to your air hose to a Nitto type and put some sealing tape around the thread, which is easily done.
Cendrato Nata
Comentado en Australia el 12 de abril de 2024
As a describe
Deathnovan
Comentado en México el 6 de octubre de 2022
Es una excelente herramienta, no le pongo 5 estrellas porqué la cabeza para las valvulas podría ser de mejor calidad.
Productos recomendados
Mex $944.76
Mex $ 472 .00 Mex $472.00