I wanted something to hold our bikes while they were in the bed of the pickup, instead of laying the bikes on their sides. I wasn't sure how these would work but I bought and used them, and I wouldn't use any other type of bike holder.They're small and almost inconspicuous. They attach to the 'lip' of the pickup bed wall (they're not permanently attached; they clamp on.) Then they strap onto the bike (to the frame, fork, wheel, or some other convenient place; the attachment spot on the bike varies depending on the bike.)They hold the bikes very solidly, because they're strong. They hold my wife's 60 lb. E-bike without any movement of the bike.I love these! As I said before: I wouldn't have any other type of bike holder.

Positives- This is a sweet mount for the most part, you can get your bike in and out fairly quickly. Fully adjustable for different bike sizes. The assembly does have a weight limit, I'm at the top edge of the limit with my SANTA CRUZ hardtail.Negative- Joker scratched my Rock Shock, just the decal. You can NOT dive through the car wash with them installed. I had to remove my bedcover to install them, they sit just above the bed.I'm still happy with it for now.BatesX3 from Kansas City is happy with this purchase

The Positives:Well made product and easy to put together and install. They hold the bikes in the truck bed with a real rigid feel, they bikes didn't move anywhere even when travelling over rough terrain. No issues with adjustability, there was enough length in the threaded rod to grab ahold of the bikes.A few Negatives:The nuts that slide into the rails can be a little tight so you have to position them correctly to get them to slide down your rails. Due to the size of the nuts that slide into the rails, they have to be installed through the end of the rail, they can't be installed through the front of the rail. Having a nut that can slide through the front and then twisted 90 degrees to hold into the rail would be preferable.The clasp that threads into these nuts has just a lock washer and a very small regular washer which is already scratching the surface off the nicely finished metal of the bracket itself. I plan on modifying this by adding some plastic washers to stop this damage. Also as these clasps are hand tightened easily for easy install and removal BUT can also be easily stolen if you leave them in your truck while you are off enjoying your ride. I removed mine and stored them inside the truck while we were away. Would be great to have a lockable option or I will replace the clasp with some standard 8mm bolts with a hex head so you have to have the right Allen key with you to be able to steal them.Love the Product ThoughWould highly recommend to others.

Don't fear the gripper! If you own a pick up truck and your bike won't allow removing the front wheel or you just don't want to do that, this is the rack for you!I looked almost every possible option for putting bikes in the back of my 4WD 2008 Tundra Crew Max before finding this one. I was ready to rig something up of my own design. I had already spent hundreds of dollars on solutions but none have been quite so simple or satisfying as the Inno Velo Gripper. The reviews I read on Amazon had me concerned but I am so glad I took the risk and ordered these.I have a bike addiction - mostly mountain bikes but that doesn't stop me from riding urban, road and comfort bikes in a number of places throughout California and Arizona. Unless I remove the front wheel, the bed of my truck is too short for any of my bikes. However, recently my wife and I got new mountain bikes which due to their unique fork design, completely eliminate using the previous system I had - which required removing the front wheel. So, we started using our trailer hitch bike rack to transport them. What a pain!Don't get me wrong, a trailer hitch rack is sufficient for short hauls but it's not great for off-road adventures or long laborious slogs across the highways and byways of our great nation. If it fails, the bikes are toast.While researching alternatives, I stumbled upon the Inno Velo Gripper and liked the concept. I decided to give them a shot and ordered them, knowing that for my Tundra rail system, I'd need the RT-202 version. I ordered two sets. Shockingly enough, they arrived the very NEXT DAY! (Thanks Amazon PRIME!) I came home from work and excitedly opened the box. Everything checked out. With all parts present and accounted for, I stepped out into the triple digit heat to inspect my rail system and see how the installation might work. I had no intention of actually installing them but after seeing how simple it was, I went to work. In about 5 minutes (no exaggeration) I had one set completely installed. I never even opened the instructions!My wife came out to see what I was doing and saw I had already fitted my bike in the rack. "Wait what?!" she exclaimed. Yeah, it was THAT easy. If you're struggling with installation, you may want to stop and re-think it. The rectangular "bolt" slides inside the c-channel of the rail. You have to slip the plastic end cap off your rail to acheive this. It's made to do this! The rest is simple but you may need to wedge your finger (or a screwdriver) behind the rectangle bolt to allow the screw threads to meet and start in the bolt. When you begin installation on your set, this statement will make sense. You just need a small amount of support to push the rectangle bolt forward enough inside the channel for the threads to catch. I did this with my finger.I put it to the test right away. On my truck (because it's a short bed) I have to leave the tailgate down with bikes inside. No big deal. The bike stayed upright and secure as I took the truck over some curbs, whipped through Los Angeles rush hour traffic and swiftly chose a flowy line through traffic back home. What? You mad bro?I have every confidence the Inno Velo Gripper will serve my needs well in the months ahead. It solves a tremendous problem for me, allowing the bikes to ride securely and upright in the bed of my truck without removing the front wheel. Locking, securing and removing the bikes is fast and easy. It can even be done without climbing into the truck bed. It is not perfect (it doesn't fit my Cannondale Lefty Trigger 29er 1 PBR Fork perfectly but it's good enough) but its a far better solution then I could find anywhere else.Overall, I'm very pleased. I bet you will be, too.

I loved the product easy to install without breaking anything and it is of very good quality, unfortunately it doesn’t fit my bicycle fork because it is round and mine is an elliptical shape