No hay artículos en el carro
No hay artículos en el carro ¿Por qué elegir nuestro kit de herramientas de reparación de roscas de 15 piezas?
Kit de herramientas de reparación de roscas de 15 piezas, todo fabricado según el estándar profesional, con una caja de almacenamiento, cada accesorio tiene su lugar, para facilitar el transporte y el almacenamiento entre trabajos.
Artesanía de alta calidad.
El kit de herramientas de reparación de roscas está hecho de alambre de acero inoxidable de precisión para mayor resistencia y durabilidad, el mango está hecho de goma de alta calidad, diseño ergonómico, antideslizante y fácil de agarrar.
Ampliamente utilizado
Este kit de reparación de roscas es para M10 para reparar roscas dañadas o desgastadas, este kit ayuda a crear una rosca interna más fuerte en metales blandos y protege las roscas roscadas contra el desgaste y los daños, ideal para reparación de motores y otras aplicaciones automotrices.
John
Comentado en los Estados Unidos el 24 de febrero de 2025
Util
Customer
Comentado en los Estados Unidos el 9 de mayo de 2024
I bought the M6-1.0 because I knew I had stripped two bolts on my water pump on my 2009 Forester. When it came time to replace it I bought this and a torque wrench, worked perfectly. It was also used on the valve cover bolts as the lower 6 get very rusty; I removed 2 bolts easily, 2 bolts with a nut extractor, and 2 bolts had to be drilled out and the threads repaired with this kit. 6 new bolts (upper 6 bolts are fine to reuse) and holds very strongly. I used with blue loctite; waited for the loctite to dry in the helicoils before installing the actual bolts.
Stephen Clark
Comentado en los Estados Unidos el 28 de diciembre de 2024
This helix core kit worked well for my needs.
Dana Cartwright
Comentado en los Estados Unidos el 6 de septiembre de 2023
Needed to fix M10 x 1.5 threads in a cast iron exhaust manifold. Three holes, each about 1/2" deep. Using lots of tapping lubricant, started the tap into the first hole. It was surprisingly hard to turn (normally cast iron threads like butter). Got about halfway into the hole and it got so hard to turn it was clear the tap would break. Ground a new taper on the tap (to get to new threads) and it went a few more turns. Repeated the grinding and eventually coaxed it to finish one hole.Just out of curiosity, I bought a second identical kit, hoping I just got a bad tap. HA! Second kit was worse. Two turns of the tap and it gave up....would not go any farther.So I ordered up a tap from McMaster-Carr. Ah, what a difference. Now I could turn the tap with one hand. Sailed through two holes without slowing down in the slightest.The inserts and the insertion tool in this kit worked fine.The tap does appear to be made of HSS as claimed. I think it just isn't made right, probably not sharpened properly.I note that most of the positive reviews mention "aluminum". This kit might be OK in a softer metal.
Raphael baribeau paquin
Comentado en Canadá el 20 de abril de 2023
The set is suppose to be 15 pieces, right now I have 10 pieces of helicoil and no tool.
Productos recomendados
Mex $218.00
Mex $ 111 .00 Mex $111.00