No hay artículos en el carro
No hay artículos en el carro Correa de repuesto EISCO para generador Van De Graaff
(1) Cinturón de repuesto.
Este es el cinturón de repuesto para el generador EISCO Van De Graaff, modelo PH0918A.
Humberto
Comentado en los Estados Unidos el 6 de marzo de 2025
Buena calidad, excelente servicio
Ofone
Comentado en los Estados Unidos el 18 de julio de 2024
I could no longer find a belt for our Science First model 10-060 VanDeGraff generator. I bought this one and it worked fantastic! It is wider and longer and thicker than the original belt so I had to modify the machine and belt to work. I used another piece of PVC pipe and made a new post but about 3/4 inch longer. Just slightly streaching the belt. Instead of the original upper plastic roller holder I cut a pair of groves in the end of the PVC pipe for the upper shaft to sit in. To do this I drilled a hole through the pipe with a drill press (90deg) and then opened them up to the top but left it so the shaft was tight in the slots. I then trimmed the belt down to about 7/8 of an inch. (The original was 3/4)I remember the science First Generator was supposed to be about 75K volts new. By measuring spark length it seems it now puts out over 300KV ! Awesome!
Isaiah Ritchey
Comentado en los Estados Unidos el 24 de abril de 2024
Approximately 1.875" inches wide. When folded 14.250" inches, thickness is 0.039" inches thick. This material is not exactly sticky, just tacky and collects dust and debris very easily.
Lucas
Comentado en los Estados Unidos el 19 de diciembre de 2023
Got this to replace a belt from probably 1972 that had worn out and snapped. This works flawlessly
Customer
Comentado en los Estados Unidos el 30 de abril de 2023
My kids love the machine. The belt makes it better
Productos recomendados
Mex $3,248.27
Mex $ 1,396 .00 Mex $1,396.00
Mex $307.00
Mex $ 168 .00 Mex $168.00
Mex $318.99
Mex $ 143 .00 Mex $143.00
Mex $212.00
Mex $ 116 .00 Mex $116.00