No hay artículos en el carro
No hay artículos en el carroMás información del producto
Junta de puerta de lavadora LG
Modelos compatibles con LG Washer Door Junta de puerta de repuesto para lavadora de carga frontal LG de 27 pulgadas. Forma el sello entre la puerta y la bañera. La junta tiene un puerto de drenaje para drenaje de agua. WM2050CW, WM2077CW, WM2101HW, WM2140CW, WM2150HW, WM2233HD, WM2233HS, WM2233HU, WM2233HW, WM2240CW, WM2250CW, WM2301HR, WM230. 1HW, WM2350HRC, WM2350HSC, WM2350HWC, WM2650HRA
Jim Weaks
Comentado en los Estados Unidos el 17 de septiembre de 2023
These seals are very hard to keep clean and mold free. My wife asked me to replace this seal just because the the old one was such a mess. It is worth buying the tool that lets you spread the spring and wire that hold the seal in place. The new seal fits well and works perfect.
P. Chen
Comentado en los Estados Unidos el 10 de julio de 2021
The boot seal fits just fine. My washer, LG WM0642HW only has 1 tube connected at 12, and no other holes. The boot seal has 1 hole at 6, but 3 uncut holes at 12. I remember watching the YouTube video and the guy mentioned he had to cut a hole for his too, so that was not a problem for me. However, I did not remember to plug the hole at 6, so my first wash resulted in major flood. Luckily everything seems fine after I plug the hole at 6. I put a cork in a finger cot and plug that hole. I will probably go back and seal the top with epoxy tomorrow.Overall, it is a good product, good fit. Just don't forget to plug the hole at 6 if you don't need it.
marcela
Comentado en México el 8 de diciembre de 2021
Me soluciono el cambio pero tuvieron que adaptarla a laMedida de una lavadora LG de modelo más antiguo.
MT113
Comentado en los Estados Unidos el 28 de junio de 2020
Our original door gasket had developed black model stains after 6 years. After several attempts at trying to clean it decided to simply replace it. I watched a few, very detailed, videos on youtube and decided it was something I could do myself. The product is very good quality and fit perfectly. I was pleasantly surprised to see I did not have to puncture the bottom of the seal to install the drain hose, the hole is already there.Do yourself a favor and buy the spring expansion tool. Absolutely worth the money and made the installation much easier. I also took off the whole front panel as the videos show. Lastly, not sure what problems the other reviewers had where they needed a new spring clamp for the front, they describe it as being rotted from the detergent. Thankfully ours was in great shape and was able to be reused.
MysticMammoth
Comentado en los Estados Unidos el 9 de septiembre de 2020
We replaced this gasket on our LG front load washer. This is a necessary task after some time with a front loader; especially if you never learned how to care for it. First, this was the right part for our washer. Second, we couldn't figure out where it went at first or how it fit back on, but videos helped with that. If i could go back and do it again, I would video us taking it apart... I called LG to ask for the correct pliers to expand the rings and they suggested I call a technician; which is not necessary... at all. If you are buying this product, you don't need a technician. Make sure to use dish soap on the gasket so that you can rotate it to the right orientation once you pop it on. It is very thick rubber, and while I was concerned at one point in puncturing it with a flat head screw driver, that never happened. No leaks. Works great. Doesn't smell weird like some things you get from a factory. Looks like brand new. I'm excited to do laundry
JAH
Comentado en los Estados Unidos el 26 de septiembre de 2020
This part number replaced my original part number and there are some enhancements that you need to be aware of before you can use this on older models.There is a drain port located on the lower area to prevent standing water therefore you will need the following additional parts that will not be listed on the original equipment drawings. I didn’t see a way to plug it.Of course i replaced the outer tub which had a connection port.A drain hose that has three clamps and a connector connects to the drain portI also had to change the balance weight due the hose and outer tub portMy model is the wm2077cw, 2006 modelIt runs like a new washer says my daughter. It should since I replaced the outer tub, bearing, spider shaft, hoses, damper, and springs.
Productos recomendados
Mex $739.00
Mex $ 384 .00 Mex $384.00
Mex $456.01
Mex $ 250 .00 Mex $250.00
Mex $542.59
Mex $ 276 .00 Mex $276.00
Mex $199.00
Mex $ 111 .00 Mex $111.00
Mex $167.40
Mex $ 98 .00 Mex $98.00