No hay artículos en el carro
No hay artículos en el carroMás información del producto
Productos de lubricación y neumáticos
Con más de 500 productos, encontrará una herramienta de calidad profesional que le permitirá ahorrar tiempo en su trabajo.
Siempre estamos innovando con nuevas herramientas que hacen que los trabajos difíciles sean más fáciles y rápidos.
La línea Jeepers Creeper ha sido una de las favoritas de la industria durante más de 50 años.
Nuestras enredaderas de plástico y enredaderas con estructura de acero son populares en todo el mundo.
terry
Comentado en los Estados Unidos el 2 de abril de 2025
Great tool .very simple easy to use.
Ken S
Comentado en los Estados Unidos el 1 de diciembre de 2024
This tool is awesome for the GM v6 3.4 it makes removal and replacement of the pushrods without removing the rockers a snap. It has a grove to guide the rod out and then back in. Totally a time saver.
My Chuy
Comentado en México el 7 de mayo de 2023
Es muy fácil de usar , pero recomiendo que se limpié bien la superficie donde se sujeta ya que el aceite hace que resbale frecuentemente, tal vez si las uñas inferiores fueran algunos mm más largas funcionaria perfecto.. ahorra mucho trabajo y tiempo, la recomiendo..
Mystery_Shopper
Comentado en Canadá el 21 de abril de 2019
Very helpful tool for lower intake manifold gaskets on 3.1L and 3.4L engines as i work for GM and i personally say this is a helpful tool. I do not use this tool everyday because we just do not see any older vehicles much anymore but done a fair share of lower intake manifold gaskets on those engines and can say the tool does speed up the process. The tool does require a bit of technique and practice too use just because i think the design of the tool so if you have never used a tool like this it will require practice. First i would make sure you push the lever up in the exact plane of the rocker arm if not then it will slip off and the rocker arm will slam down and bust your knuckles. Second, Lower the tool slowly and only lift up until the push rod can clear its cup. Don't try to get a lot of clearance because a lot of pressure is on the spring. Third, do not try to take the push rod out from the side, it will not happen. Five, I have seen a few reviews that it doesn't provide enough leverage to open the valve to remove the push rod. Sort of but not entirely, if you look on the side of the tool near the handle. It fits a 3/8 ratchet or breaker bar for additional leverage. It does provide more leverage. *I want others to know that when using the tool weather with or without a breaker bar for additional leverage, ensure when you are forcing the spring down which will open the valve to make sure the cylinder to NOT at TDC because if it is the valve will contact the top of the piston and if more pressure is applied it could wrap or bend the valve and more than a gasket is your problems.* Additional when removing the push rods ensure to keep them IN ORDER because they are different lengths and if mixed up, damage WILL occur. Otherwise the tool is unique all a solid well built tool and does the job because i will say it now that it is a pain in the a$@ to remove the rocker arms and then having to re-torque them which in my job. Time is money, so if your needing, having, or going to be doing an lower intake gaskets on push rod engines. Don't hesitate to push this simple tool because money saved is more money spent on tools.
ljb
Comentado en Canadá el 23 de mayo de 2018
This made the job of installing upper and lower intake manifold gaskets an absolute breeze on my 97 Lumina with a 3100. No need to let go the roller rockers and having to deal with retorquing them properly - this significantly cut the repair time down.
John
Comentado en los Estados Unidos el 6 de marzo de 2016
Worked perfectly once I got the hang up it. The first time I tried to lift the rocker, the tool slipped off the back and the valve slammed shut. The trick is to push the tool toward the rocker arm at the same time as you're compressing the spring. After figuring that out, I got all 12 pushrods out in about a minute. It was really fast. Others have said that the weld was bad, but mine looked quite strong, and obviously didn't break for me. Seems well constructed. Tool saved a lot of time!
Productos recomendados
Mex $3,000.00
Mex $ 1,230 .00 Mex $1,230.00
Mex $1,222.44
Mex $ 611 .00 Mex $611.00
Mex $722.00
Mex $ 389 .00 Mex $389.00
Mex $268.70
Mex $ 145 .00 Mex $145.00
Mex $3,047.39
Mex $ 1,462 .00 Mex $1,462.00
Mex $1,048.90
Mex $ 566 .00 Mex $566.00
Mex $1,451.74
Mex $ 624 .00 Mex $624.00