Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

LMT Onsrud 63-750 Series Molinillos de punta cuadrada de carburo, acabado sin revestimiento (brillante), hélice de 21 grados, para uso con plásticos suaves, 1/4 in

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,310.22

Mex $ 550 .00 Mex $550.00

En stock

1.Tamaño:285×185cm=112×73inch【w×h】


Acerca de este artículo

  • Las herramientas de carburo sólido ofrecen una larga vida útil de la herramienta y velocidades de corte más rápidas que otros sustratos, pero son más quebradizas y se deben usar con sistemas rígidos de portaherramientas
  • Las herramientas sin revestimiento presentan sólo el sustrato base sin ningún tratamiento adicional o revestimientos y son adecuadas para una amplia gama de aplicaciones.
  • Las espigas redondas permiten su uso con una amplia variedad de sistemas de portaherramientas
  • Cuando se ejecuta en sentido contrario a las agujas del reloj (corte a la derecha) las herramientas estriadas en espiral evacuan las virutas fuera del orificio para reducir atascos.
  • Doble flauta, ángulo de 21 grados.



Más información del producto

Acerca de LMT Onsrud

Onsrud Cutter introdujo una línea de herramientas específicamente diseñadas para cortar plásticos. Desde un modesto inicio de 48 SKU en 1983, esta línea de plástico se ha convertido en un catálogo completo de 650 herramientas para mecanizado de plástico.


Maria Contreras
Comentado en los Estados Unidos el 9 de agosto de 2019
Excelente calidad y duracion
Paul Haiducu
Comentado en los Estados Unidos el 19 de septiembre de 2019
I am not an expert in this, but the shop teacher I have worked with to drill holes in an aluminum plate tells me that the bit is damaged and cannot be used. Unfortunately, we have not carefully looked at the bit when it arrived (ordered on May 23, 2019), hence it is too late to return it or exchange it. It took the teacher a while to find time for the project I wanted done (we had the summer off, traveling, etc.). Yesterday, he realized that the bit is no good. The bit has not been used (and the shop teacher tells me that is obvious). These are not cheap, I am out almost $30.
Matt W.
Comentado en los Estados Unidos el 26 de junio de 2017
This worked great for cutting acrylic on a CNC router.
PN
Comentado en los Estados Unidos el 2 de mayo de 2017
Nice cutter for plastic
R. A. Jones
Comentado en los Estados Unidos el 11 de octubre de 2014
The title is a bit off because it says the shank is 0.125" when the specs say the shank is 1/4". The photo also shows a cutter with the shank diameter the same as the cutting diameter. It IS, however, 1/4" shank. I use it on a smallish CNC router with a 2hp spindle and it's worked quite well. In soft plastics like ABS I initially had the chip winding around the shank, melting and make a truly horrible cut. I built a new dust shoe to dramatically increase the air velocity around the cutter and with that dust shoe to keep the chips clear this cutter has worked very well.
Productos recomendados

Mex $6,261.43

Mex $ 1,881 .00 Mex $1,881.00

4.6
Elegir