No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Alltooetools - Herramienta para cazar roscas
M10 x 1.0 M12 x 1.25 M14 x 1.5 M18 x 1.5 ideal para limpiar y volver a enhebrar roscas dañadas, elimina la corrosión y endereza las roscas dañadas, reduce la posibilidad de enhebrado cruzado.
La junta roscada de la bujía está hecha de material de acero al carbono templado de alta calidad, la superficie es ennegrecida y resistente al óxido, resistente a los arañazos, al desgaste, de alta resistencia y tiene la mejor durabilidad y vida útil.
Doble extremo para roscas de 14 mm y 18 mm, utiliza con bujías de 13/16 pulgadas.
Especificaciones:
Material: Acero al carbono
Tamaño pequeño del llave: M10 x 1.0/M12 x 1.25
Tamaño del llave grande: M14 x 1.5/M18 x 1.5
Incluye:
1 llave M10 x 1.0/M12 x 1.25
1 llave M14 x 1.5/M18 x 1.5
Aplicable
Apto para culatas de cilindro de 14 mm y 18 mm
Doble extremo para roscas de 14 mm y 18 mm, utiliza con bujías de 13/16 pulgadas.
Mark Lackey
Comentado en los Estados Unidos el 15 de marzo de 2025
haven't used these yet but appear to be good quality.
Dorald Keefer
Comentado en los Estados Unidos el 14 de marzo de 2025
I've been wanting to/ needing one of these tools for a long time now. Since I seem to be reaping more and more of my neighbors power equipment, (after they have tried and failed including cross threading the spark plug.), having the ability to retrace the threads is extremely handy BUT be careful and do not allow any of the shavings to drop into the cylinder.
Rylenol
Comentado en Canadá el 12 de abril de 2025
Worked but the steel is very soft. Would very likely fail in an iron head. Worked ok on my aluminum head. If it was tapered more it would be better.
Gman
Comentado en los Estados Unidos el 27 de marzo de 2024
This Alltooetools Spark Plug Thread Chaser got me out of a jam.I installed a Wideband O2 stainless bung in my exhaust. Not being a professional TIG welder I accidentally welded at a higher amperage then I actually needed. So although the bung was installed well I botched the threads a bit on the stainless bung.So I used the 18mm tap from the Alltooetools Spark Plug Thread Chaser set and using a bit of oil on the threads the tap cleaned up the threads nicely.The taps are pretty well made and I never felt like the tap was going to break/snap like cheaper taps sometimes do.It is a good value and if you do any automotive work then this would be handy to have in your tool box.The sizes included are; M10 x 1.0, M12 x 1.25, M14 x 1.5, and M18 x 1.5.
Greghonda450
Comentado en los Estados Unidos el 12 de noviembre de 2024
Worked great for chasing threads in O2 sensors that came out hard. Alot easier than cutting off a tap and using vise grips. Nice to have the various sizes kicking around for next time, provided I can find them.
Productos recomendados
Mex $930.87
Mex $ 446 .00 Mex $446.00
Mex $933.72
Mex $ 438 .00 Mex $438.00