No hay artículos en el carro
No hay artículos en el carroMás información del producto
Erick76
Comentado en México el 21 de julio de 2024
Muy buena calidad y despeño, preferí este a un Bosch y no me decepciono en absoluto
Sharkynyc
Comentado en los Estados Unidos el 17 de junio de 2023
So pleased - a month trying to get this stripped bolt off and I was running low on transmission fluid! I don’t write many reviews but hoping this helps the next person.Ok so I had a very badly stripped differential fill Allen plug. Standard plug on a Land Rober SUV. This was semi stripped by prior mechanic and I just made it worse without the right tools. Tried the cold chisel method (you can see from photos I whacked the s&@t out of it and no luck. Bought the other stripped allen key versions on Amazon (the ones that have a slight twist in a standard looking hex/Allen to provide grip) and they just won’t get enough grip (not even close in my case so a big waste of time) if you were as badly stripped out as I was. No chance at all. I was really thinking I would need to learn to weld and go buy a welder to attach another bolt on which was going to be my last resort…Tried this and worked extremely well (was done in 20 minutes) with the following comments:As you can see from the photo I used the 11/32 size which fit about a third of the way into the stripped hex differential plug loose. I tap tapped it in gently with a 3 lb hammer to get it about 2/3 of the way in. You don’t need to be poinding it in hard since these have a slight taper which makes them slightly larger as they go further in. As you can see after massively torquing it at the end while successfully remove the fill plug it was ultimately seated about. 90% down. With the large 15mm sized head you know have a solid place to add a socket with a breaker or heavy duty impact.Other comments - IMO very little chance of this snapping off as I see others concerned about - I can’t attest to the quality of the metal but the size I was able to use makes it less likely it would snap. If I were to use the smallest 5-6 (9/32 or less) of the extractors provided I would be more concerned about putting a long breaker bar but at this size no issues. I ended up having to put a 15mm socket on a two foot breaker bar / pipe to get this to finally come loose. And once it did it was literally just finger screwing the rest of it off. Amazing how a seized bolt will hold until it doesn’t. I tried my 3/8 inch (air) impact gun before the breaker bar which is a low clearance since I didn’t have a ton of space. It’s like 350 foot pounds of torque so a mid range impact and it didn’t budge this differential plug although it MAY have weakened it up a bit so my breaker bar worked easier.Best of luck of luck to those reading this but this is the best of 3-4 methods I used and wish I started here since it was easy.Last bit of advice don’t underestimate how much torque you need to get one of these seized plugs off! And if you are in a tight area and able to use one of the provided extractors with some reasonable girth a long breaker bar is the way to go…
Corey Smith
Comentado en los Estados Unidos el 15 de diciembre de 2023
I bought this set over a year ago and it has been amazing. I’ve used a wide range of the sizes and they’ve all worked for me. Most notable for me is the 1/8 size extractor; I had to use it to extract 56 screws out of an aircraft windshield and the picture shows it after that. Has some wear but I can still use it. Definitely has given me my moneys worth.
親方
Comentado en Japón el 7 de noviembre de 2023
注文して5日で届いた。配送状態は特に問題はなし。一つ作りが粗そうな物もあるが値段相応で不満はない。まだ機会が無くて未使用です。六角は13 16 19 22 25.3？ｍｍの5種類です。
Anthony Wild
Comentado en Australia el 15 de septiembre de 2021
Somehow, somewhere you going to come across a hex bolt or spline bolt that becomes mysteriously tight that it rounds or breaks the tool. This set of bolt extractors made getting this VW Amarok transmission fill bolt out as easy as putting a new one in, well nearly, a bit of force needed. Slowly screw bolt extractor counter clockwise and it will go in to the point of where the hex/spline bolt gives and starts screwing out, easy.Don't use a dremel or cold chisel, these could destroy transmission housing.
Ak
I had a serious issue with a damaged screw, and this tool was able to extract with ease
Productos recomendados
Mex $480.37
Mex $ 249 .00 Mex $249.00
Mex $143.35
Mex $ 75 .00 Mex $75.00