Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Paquete de 2 adaptadores serie DB25 para conector D-SUB de 25 pines hembra RS232 adaptador a terminal conector módulo de señal con pernos tuercas y destornillador

Envío gratis en pedidos superiores a Mex $600.00

Mex $279.90

Mex $ 151 .00 Mex $151.00

En stock

Acerca de este artículo

  • No necesita soldadura: no requiere soldadura, diseño de terminal de cobre de protección del medio ambiente (30AWG-18AWG). No hay necesidad de soldador y herramientas engorrosas, fácil cableado.
  • Cable DB25 para bricolaje: con conectores hembra de 25 pines, puedes hacer el cable DB25 por ti mismo. La longitud del cable y la secuencia de cableado se pueden personalizar. El adaptador DB25 se puede desmontar y montar repetidamente
  • Ámbito de aplicación: D-sub de 25 pines no necesita soldar el conector de puerto serie, que es adecuado para adaptador serie DB25, como computadora y máquina de control de impuestos, cámara digital, PLC, PDA, MODEM, decodificador, máquina de código de barras, instrumentación industrial y otros equipos para la comunicación.
  • Características funcionales: adecuado para todo tipo de productos de control industrial que necesitan comunicación en serie para conexión de pines, base de cobre, interfaz chapada en oro de 9 pines, spray de sal de carcasa de hierro durante 24 horas
  • Contenido del paquete: 2 piezas hembra con funda, 1 destornillador, 4 tuercas de puerto serie 4#5+7, 4 pernos largos de puerto serie de 4#62 mm, 4 tornillos de 3 x 8 mm, 2 placas de presión de alambre, 8 cubiertas de alambre


El pin conector sin soldadura DB25 adopta chapado en oro de cobre puro y diseño de carcasa ultrafina, sin cables de soldadura. Este producto cumple con la norma de protección del medio ambiente ROHS. La fabricación privada del molde tiene las características de resistencia al desgaste y resistencia a la flexión, y la calidad está garantizada

Especificaciones técnicas:

Nombre del producto: junta última intervensión de soldadura DB25.

Modelo del producto: aguja sólida macho / hembra, aguja de perforación macho / hembra

Material de la carcasa: carcasa de plástico ABS con protección del

Material del conector: núcleo de goma de protección del medio ambiente blanco / pin chapado en oro de cobre puro

Material del terminal: terminal de protección del medio ambiente de cobre puro, goma ignífuga de protección del medio ambiente.

Manga de cola: protección del medio ambiente flexible de 8 mm.

Aplicaciones: PLC, PDA, máquina de código de barras, módem, máquina de control de impuestos, cámara digital, decodificador, instrumento industrial, etc.

Tamaño: 67,3 mm x 57 mm x 20,6 mm.

El paquete incluye:

2 conectores hembra sin soldadura DB25.

2 abrazaderas de cable.

4 tornillos.

4 tornillos largos.

8 cubiertas de alambre.

1 destornillador.

4 tuercas de puerto serie 4#5+7


McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
McLogan
Comentado en los Estados Unidos el 23 de diciembre de 2023
I worked in industrial controls for many years, and I can say that these are very nice quality DB25-F connector adapters.The circuit boards, connectors, and cases are all very well done. The kit comes with a selection of cable strain relief glands for whatever size cable you use. The terminals are by necessity very tiny, and come with a tiny screwdriver to tighten the wire in the terminal. There is not much room around the terminals but these are usually used for signal and low current connections so you will probably be using smaller gauge wire.These would be great for one-of jobs or making prototype cables where you might want to swap wires. Much easier than all those tiny solder pins or even crimp pins on the DB connector. I am updating an older CNC machine and these will be great to attach to the older signal breakout board already in the machine.Very nice product. Recommended.
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
jml
Comentado en los Estados Unidos el 15 de noviembre de 2023
Typically, when dealing with unknown signals, you need to do a bit of pin-swapping to get cables built correctly. These connectors remove that problem -- screw terminals allow you to easily change configurations and when you're done, you can either leave them as-is or document the config and re-use the test connectors. Well-made and come with all of the hardware you need. I wish they were available in 9-pin as well!
Productos recomendados

Mex $548.56

Mex $ 274 .00 Mex $274.00

4.5
Elegir

Mex $288.74

Mex $ 129 .00 Mex $129.00

4.6
Elegir

Mex $1,081.68

Mex $ 486 .00 Mex $486.00

4.5
Elegir