Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Pistola de pegamento caliente de tamaño completo, pistolas de pegamento MONVICT de 120 W y 80 W, pistola de pegamento de doble temperatura, cable desmontable para uso de base de pie, pistola de

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,147.71

Mex $ 470 .00 Mex $470.00

En stock

1.Color:Mc-809 Blanco


Acerca de este artículo

  • Base de pie: ención con otras pilas de pegento, nuea pistola de pegento caliente patentada incorpora u base de pie única evitar que tu pistola de pegamento caliente se vuelque. Es u opción ideal para todos los usuarios de pistolas de pegamento termofusible. Tiene la capacidad de ser utilizado sin cables hasta 5 minutos después de ser precalentado. Conecta el cable de alimentación para convertir la pistola de pegamento en una pistola de pegamento tradicional.
  • Fácil de usar: es una pistola de pegamento caliente de tamañopleto, pero es muy fácil de usar. Simplemente enchufa y luego cambia tu energía a 80 W o 120 W, se calentará en 1 – 3 minutos, comienza tu proyecto de decoración de manualidades con esta pistola de pegamento.
  • Tamaño completo y seguro: pistola de pegamento caliente de tamaño completo (no mini) con boquilla de cobre de protección antiquemaduras, sistema de calefacción PTC de cerámica está certificado por UL. Fabricado con plástico de alta calidad diseñado para proteger de la alta presión y temperatura sostenidas. Un diseño ergonómico y mango de flujo hacen que sea cómodo de agarrar y fácil de sostener. Inserta dos barras de pegamento cortas para utilizar esta pistola de pegamento caliente de tamaño completo.
  • Calentamiento rápido: esta pistola de pegamento caliente de doble potencia puede cambiar a ajustes de potencia de 80 y 120 W, tarda de 1 a 3 minutos en calentarse. Ahorra consejos de pegamento: El calor residual y la presión pueden ayudar a que la pistola de pegamento siga funcionando incluso apagada, por lo que es mejor apagar la energía unos minutos antes de detener el uso para ahorrar las barras de pegamento y energía.
  • pliamente utilizado: pistola de pegamento caliente con ajustes de potencia duales, lo que permite trabajos ligeros y pesados, se puede utilizar para bricolaje, oficina, manualidades, artes y hogar, reparaciones rápidas, trabajos domésticos, decoración de festivales/regalos... Equipado con 12 barras de pegamento caliente de alta calidad (largo: 15 cm. Diámetro: 11 mm, 3 protectores de dedos de silicona. Por favor, ponte en contacto con nosotros para cualquier problema, nuestros técnicos siempre estarán ahí para apoyarte. Consejos: esta no es una pistola de pegamento caliente con carga de batería, la pistola de pegamento se calienta solo conectando Compra barras de pegamento de calidad extra, busca ASIN [B09RJYFJ9S].



Descripción del producto

Pistola de pegamento caliente Merry

Un excelente proyecto comienza con una maravillosa pistola de pegamento

La pistola de pegamento de fusión en caliente MONVICT se puede utilizar tanto en grados industriales como domésticos. Es adecuado para materiales de unión como madera, plástico, vidrio, metal, piedra, cerámica, concha, ladrillo, papel, mimbre, encaje, algodón, tela.

Diseño único e innovador:

Toma de alimentación separada: cable y cable desmontable. Base de soporte: seguro, estable y conveniente. Calefacción rápida: 80-120 W de doble potencia, 1-3 minutos para calentar.

Características:

Pistola de pegamento caliente utiliza para barras de pegamento de 0.4 a 0.4 pulgadas. Voltaje de uso: 100-240 V. Frecuencia: 50-60Hz Longitud del cable del cargador: 140 cm

Pistola de pegamento caliente

Ventajas del producto

Soporte base

Soporte de base estable

Nuestra pistola de pegamento caliente tiene un diseño único independiente, que es más conveniente y seguro de usar que otras pistolas de pegamento caliente con un soporte frontal. No más preocupaciones por la caída y la quema.

Enchufe

Cable extraíble

Nuestra pistola de pegamento termofusible de doble potencia de 80 / 120 W está diseñada con una toma de corriente separada, lo que te permite usarlo de dos maneras: uso con cable y uso de cable desmontable después del precalentamiento, cuanto más tiempo te conectes, más tiempo podrás usarlo inalámbrico. Será más fácil para usted completar su proyecto en cualquier lugar.

Boquilla

Boquilla de cobre anticalor

Nuestra pistola de pegamento caliente de tamaño completo está equipada con una boquilla de cobre, que tiene una durabilidad más larga que otras con una boquilla de aluminio de baja durabilidad. Teniendo en cuenta el uso de pistola de pegamento de forma segura, nuestra pistola de pegamento de fusión en caliente utiliza una cubierta anticalor en la boquilla, que puede evitar eficazmente quemaduras por contacto con las boquillas.

REGALOS GRATIS

Dedo

Protector de dedos

Para utilizar cómodamente la pistola de pegamento de fusión en caliente, presentamos 3 piezas de protector de dedo de silicona. Son flexibles y no afectan a la flexibilidad de los dedos cuando se usan, ponen y quitan fácilmente. Lo más importante es que protegen tus dedos.

Palillos de pistola de pegamento caliente

Barras de pegamento

Nuestra pistola de pegamento viene con 12 piezas de pegamento de alta viscosidad que hace que sea fácil unir madera, metal, vidrio, cartón, plástico, etc. Alta transparencia hace que parezca cristal cuando se funde.

¿Cómo utilizar?

Uso

Consejos de uso:

Inserta la barra de pegamento y empuja un poco en la pistola de pegamento con la mano, luego aprieta el gatillo para empujar la barra de pegamento a la parte calefactora. Si estás usando barras de pegamento que son más cortas de 5.5 pulgadas de largo, por favor, inserta dos barras de pegamento para usar la pistola de pegamento. La segunda barra de pegamento ayudará a que el pegamento derretido salga de la boquilla.Esta no es una pistola de pegamento caliente con una batería, usted tiene que calentar la pistola de pegamento primero, y luego se utiliza con cable o sin cable.

Muestra de productos y consejos cálidos

Uso:

Sobre el goteo y guardar barras de pegamento:

Esta es una pistola de pegamento caliente de 80/120W, el pegamento se derrite más rápido y más uniforme que otras mini pistolas de pegamento. El pegamento derretido en la boquilla continuará goteando después de que la pistola de pegamento se desconecte y apage. Ese es un fenómeno físico normal, no te preocupes, porque el calor y la presión toman tiempo para disiparse. El método de ahorro de palos y no goteo es apagar la alimentación unos minutos antes de dejar de usar.

Advertencias:

No tire de la barra de pegamento que no se utiliza de la pistola de pegamentoNo toque la boquilla precalentada de la pistola de pegamento directamente con los dedosNo deje que la pistola de pegamento obtenga agua

Precauciones:

No utilice la pistola de pegamento en condiciones húmedas. No está diseñado para niños menores de 12 años sin supervisión de un adulto. Almacene pistola de pegamento caliente solo después de que la boquilla se enfríe, de lo contrario el calor restante de la boquilla puede dañar otros artículos. La boquilla y el pegamento se calentarán a más de 200 ℃ No toques la boquilla ni el pegamento mientras trabajas. En caso de contacto con la boquilla o pegamento caliente, lave inmediatamente con agua fría, luego retire el pegamento de la piel.


Sheri
Comentado en Canadá el 5 de marzo de 2025
Very happy with this purchase
M-E C
Comentado en Canadá el 6 de febrero de 2025
I had a good glue gun. It died. Now I have this. I love this gluegun with all my being. The nozzle is super precise and stays clean because of that silicon bit, it stands upright, it heats up in no time, and it comes with silicon finger protectors and the glue sticks that came with are absolutely awesome, better than the gorilla ones. I shall be buying those from now on. And that glue solidifies HARD and not yellow. I've got only good things to say about the whole package.
Jessica
Comentado en Canadá el 5 de enero de 2025
Has its own stand, and an on/off button. Heats up fast and flows well
Bright
Comentado en los Estados Unidos el 26 de julio de 2020
I want to thank seller (Monvict) for the cordless rechargeable glue gun. I used this glue gun few time after receiving it and happy with what I paid for this nice product with all the features, I was looking for. love the idea of this glue gun and love the design.This is my fourth glue gun, Now I know what we want from any craft glue gun. I will be happy to share the pros and cons of this glue gun, hope this will help your future buying.ProsRe chargeable cordlessLove this feature coz when I want to work I don’t want my cord to disturb my work, especially when I shoot my videos I want cordless.Working time on stand byOnce this is fully hot, you can unplug and can work for 5 minute without charging . Well, I've used it for more practical projects and it's absolutely perfect. So, if you need something more constant, go for a plug in, but for most arts and crafts projects, this will probably be just fine. The instruction sheet says it's good for 2 minutes but I think I used it with success for much longer.Finger safeguardI always look for these finger safeguards because when I accidentally hit the nozzle and burnt my fingers, Because have bad habit of touching my crafts works while it’s still hot. After receiving this felt happy thought will wear and protect my fingers while working. I was not comfortable but this is definitely helpful for new crafters😊Leak proofI had very bad experience with leaking of my previous glue guns, The tip heats up and it works for a while, even drips out the glue while in the stand, With this can say this drip only when you over heat them, Once this is fully heated to melting point of glue stick, switch off ready to work and this glue does not leaks. Don’t forget to reheat this again, So that by pulling hard on trigger for glue to come when it’s warm, You can break the trigger and this will start leaking.Glue stickThe glue sticks the seller sent was of great quality, would be happy to buy again, very strong and dries clear, without leaving glue strands. Tried to break apart my wood blocks, which was super strong bonding.This quality I get with gorilla glue only, which is bit costly. Not sure about the price, Request the Seller to please make this available for buying.Charging cordThis glue gun charging cord works with this type of other High temperature glue guns, Incase the cord not working cord is easily available Not a big problem.NozzleIf you are not working with delicate projects like jewelry making or tiny flowers this is best glue gun.ConsNozzleI work on some delicate projects also,So was looking for this nozzle, But other glue guns available with interchangeable Nozzle are either high priced or very few cordless.WeightI felt the glue gun to stand on the stand was on bit light in weight, It should weight little more for not to fall on your project while working.In my opinion I love this glue gun! Will recommend my crafty friends to buy this glue gun have great features at this price👍
JerriD
Comentado en los Estados Unidos el 6 de octubre de 2020
This hot glue gun heats quickly, is convenient and easy to use.At first glace, it seems kind of cheaply-made. It is definitely not a high-end glue gun, but it comes at a decent price. It has a solid base to allow it stand upright. The trigger is long and easy to reach. It has a sufficient heft to it to allow it to stand sturdily, but it's not too heavy as to make it unwieldy. In the box is the glue gun, 12 short glue sticks, three finger protectors (much appreciated!) and a business card with instructions. The switch goes up for low, down for high, middle for off. An indicator light on the back lets you know at a glance what temp you have it set to.I turned the gun on high and waited two minutes before testing. It was ready to use after two minutes. The glue flowed easily - however it would not stop flowing. The photo of the instruction card shows the amount of glue that leaked in less than a minute. I thought having an upright gun would help with that problem, but it did not. It actually leaked more than I'm used to while on high heat. This is not a deal breaker for me, plus the leaking stopped immediately on the low setting. The glue was still plenty pliable enough to use on low. The nozzle is a little thicker than I'd like, but it is still easily maneuverable in tight spots. It is best suited to larger crafts as opposed to very small projects that would need more precise placement of glue.Overall, this was a much better purchase than the one I got for about the same price at a national craft store chain last year. That one lasted about 2 minutes and was nothing but a pain to use. This Monvict glue gun is far superior to what I had, and I am pleased with my purchase.Decided to change to 5 stars because it is so much nicer than what I had, and I'm really enjoying it.
Productos recomendados

Mex $141.79

Mex $ 80 .00 Mex $80.00

4.8
Elegir