No hay artículos en el carro
No hay artículos en el carro Especificaciones:
PCB:
Tamaño de PCB: 12.024 × 7.72 cm/4.73 × 3 pulgadas.
Rejilla de almohadillas para orejas/paso: 2,54 mm, diámetro del agujero: 0,8 mm.
Paso del bloque de terminales: 3,5 mm, diámetro del agujero: 1,2 mm.
Bloque de terminales:
Paso: mini bloques de terminales de 3,5 mm, total de 84 pines (3 x 24 unidades, 2 x 6 piezas).
Rango de alambre: 26~16AWG, longitud de tira de 5 mm, tornillos de acero M2, cabezal de pasador y latón jaula.
Enchufe hembra:
Paso: 2.54 mm, longitud del pasador 15 mm.
Una sola de 10 pines, una sola de 8 pines, 5 unidades, doble de 18 pines.
Peso: 73 g.
El paquete incluye:
1 juego de placa de bloque de terminales.
Doug Robinson
Comentado en Canadá el 21 de enero de 2025
It's ok, but there was 11 screw terminals missing, Fortunately, I didn't need all of them, otherwise I would have to return it.
BlondieSL
Comentado en Canadá el 20 de diciembre de 2024
I always like to use prototype boards because I do not like having to solder and unsolder wires/parts directly to my boards.I use these on all my Arduino and ESP32 boards.These do make life easier.
Steve M
Comentado en los Estados Unidos el 19 de enero de 2024
Some reviews said the ink screening is not right, but my board is perfect. The screening labels on the board do not line up with the mega board, they line up with the output screw connections and the inner bead board connection points. The board must be assembled so the connections must be soldered on the board. If you can do this, then you will have problems
williamkeyser77
Comentado en los Estados Unidos el 5 de junio de 2023
Had 2 fall out within a week of installing and the other 2 weren't staying in very well either. Switched to another brand and have had no issues.
Nope
Comentado en los Estados Unidos el 18 de mayo de 2023
Huge improvement over the stock lights and was able to reuse the factory plugs off the old lights
Rodrigo
Comentado en los Estados Unidos el 8 de marzo de 2023
Muy buenas yo las uso bastante esta marca están bien y es un precio justo
Kiki
Comentado en los Estados Unidos el 21 de febrero de 2023
These lights are great. The stop lights/ turn signals are super bright compared to the taillights. I'm never disappointed with any of the Nilight products. I have fog lights, taillights and led bars on different vehicles and are real pleased with the quality. Also have them mounted on a cement truck that gets washed with pressure 10-20 times a day and never had a light leak and get any moisture inside.
carlyle h.
Comentado en los Estados Unidos el 2 de noviembre de 2023
Great buy!
Mark K.
Comentado en los Estados Unidos el 6 de mayo de 2021
This makes hooking up to a Mega or Adafruit Grand Central very easy. Having both the terminal blocks and the regular pin array make testing and other items very easy. Assembly, while tedious, is very simple.
PaulJ
Comentado en Canadá el 3 de mayo de 2019
Very nice item. On mine there were a couple of screw terminals that won't tighten but they aren't on essential Arduino pins. You have to solder the terminals so check the screws first and put any faulty ones on pins you're not going to use. Also, the terminal blocks snap into each other. If you don't snap them together only the first few will fit and then you'll find they won't line up with the holes in the PCB. Good value!
Productos recomendados
Mex $289.69
Mex $ 133 .00 Mex $133.00
Mex $664.12
Mex $ 358 .00 Mex $358.00
Mex $1,085.10
Mex $ 553 .00 Mex $553.00
Mex $155.47
Mex $ 83 .00 Mex $83.00
Mex $722.70
Mex $ 390 .00 Mex $390.00
Mex $161.39
Mex $ 93 .00 Mex $93.00
Mex $350.10
Mex $ 189 .00 Mex $189.00