No hay artículos en el carro
No hay artículos en el carroConstruido con un sistema de acolchado de aire/espuma de alta tecnología que beneficia tanto al entrenador como al boxeador. Con un grosor completo de 7,6 cm, los manoplas de aire absorben grandes disparos de tiempo, pero son ligeros en solo 340 g. por guante. Compartimento de mano de estilo deslizante que se fija de forma segura y cómoda a tus manos.
Czak
Comentado en los Estados Unidos el 23 de marzo de 2025
My 07 6.0 FICM was starting to drop below 40v and not idling well when cold. Then it started to remain under 45v. I installed this power supply and I am holding 48v cold and warm. Truck is running great!Took about 40 min to install. T15 and T20 bolt heads. Power supply fit well as is. Bolted it and started the truck. No programming needed.Sidenote: Turns out my truck had a 4 pin 2003 FICM but that didn't change anything.
Brent glushka
Comentado en Canadá el 15 de marzo de 2025
Installed it fired right up so far so good 🤞
Mike
Comentado en los Estados Unidos el 12 de enero de 2025
It was what I needed and worked perfectly, and good value for the money.
ABRIL REYES
Comentado en México el 2 de junio de 2024
Llego 2 dias antes de la fecha de entrega llego muy bien embalado se ve de muy buena calidad ahora solo falta instalar aver que tal funciona
Coeztar
Comentado en México el 7 de octubre de 2024
Obviamente que para solucionar el problema se debe diagnosticar correctamente y no cambiar la pieza porque si ,o porque salió el código, dicho lo anterior cumple al 100% con su funcionamiento.
Turk182
Comentado en los Estados Unidos el 9 de diciembre de 2023
The original FICM powersupply in my 2006 F250 went bad. This one dropped right in and works great.As long as it keeps working I can't complain and the price was excellent.Getting the old FICM out is a bit of a pain (I'm a big guy with extra large hands. It's doable, but it'd be much easier for someone with smaller hands.Once you get the FICM out, it's pretty easy to swap out the power supply, no special rools needed, no soldering or anything like that, just remove some torx screws (make sure to remove the four under the sheet metal lid) and pry open the case. There are a bunch more torx screws holding the board down on the inside (some of the ones on mine were covered in hotglue, a razor knife and pick removed that)There are some good videos on Youtube covering the process.
Benito f.
Comentado en México el 6 de diciembre de 2023
Funciono bien el camión no arrancaba lo instale y funciono perfectamente lo recomiendo y económico excelente precio
ColdFlame
Comentado en Canadá el 11 de diciembre de 2023
This performed exactly as I hoped. My FICM was putting out voltages sub-30V during load... I'm surprised my fuel injectors weren't damaged by that (this was a new truck to me, just FYI). Anyhow; ordered this once we found that, quick install, and we are outputting the appropriate amount of voltage now. It is very easy to swap out; you just need to be mindful when doing the work. I would buy this again if needed, and I am hopeful that it will stand up to time and keep my truck running for many more years.
Dimitri Therios
Comentado en los Estados Unidos el 24 de marzo de 2018
Two months in. No good. Have to watch. Won’t re order these the vendor replaces.
Anthony
Comentado en Canadá el 24 de junio de 2017
Great to use for heavy punchers, except the padding come out pretty fast after a few season.
Short4j
Comentado en los Estados Unidos el 19 de marzo de 2015
Great padding and quality, not hard like some other mitts.
A69ford
Comentado en los Estados Unidos el 20 de abril de 2015
these things are awesome. great for my elbows and wrists when I have heavy dummies trying to tear my arms off. they really absorb the shock and impact of punchesalthough they did send me the wrong color. I ordered the black and red as in the pic but they sent white and red.
A.J.
Comentado en los Estados Unidos el 10 de agosto de 2012
I did my research before buying these mitts and I was impressed by all the feed back. The seller delivered it very promptly. The mitts on other hand were horrible. The inside fabric gave my friend a horrific cut. I also train with heavy hitters and they didn't uphold properly. The stitching was coming out and there was no curvature to hold the pad correctly. My partner punched outside of the middle and my nail bent backwards. Do not buy these focus mitts. I'm trying to return them as we speak. Except I have to pay the shipping out of pocket to return them. I have to figure out if it is worth it or not. Two thumbs down and a bent nail!
Productos recomendados
Mex $1,597.06
Mex $ 718 .00 Mex $718.00
Mex $2,224.75
Mex $ 934 .00 Mex $934.00