No hay artículos en el carro
No hay artículos en el carroYa sea que estés en posesión paradójica de pinzas de freno post-montaje y un marco plano o simplemente necesitas corregir el adaptador de montaje plano a plano para adaptarse al tamaño de rotor elegido, Shimano tiene un adaptador de freno de disco de montaje plano para ponerte en marcha (y parar) en un instante. Disponible en una variedad de combinaciones de poste/plano y plano/plano para acomodar rotores de 140 mm y/o 160 mm, este adaptador se instala rápidamente y garantiza que tus pinzas funcionen sin problemas con ese nuevo marco brillante.
Preston
Comentado en los Estados Unidos el 15 de diciembre de 2024
A must have for fitting GRX brakes on my bike
Pedro Lahoz
Comentado en los Estados Unidos el 17 de octubre de 2024
This wedge, will allow your disc brake road frame to accept 160mm rotors.The wedge includes two short screws which will attach the brake calliper to the wedge.The longer screws provided with the callipers will be used to attach the wedge to the frame.That said, the wedge has 4 openings, Two for attaching the calliper to the wedge, and two for attaching the wedge to the frame.Before getting this adapter I thought it only had two openings and that I would need two very long screws. The wedge has a thinner and thicker side, pay attention to this and to what side goes forward or rearward.One more Thing.... You may be assembling a new road bike frame. No matter how expensive or inexpensive your frame was, the bores where the brake calliper "sit" most likely will need to be trued. If your rotor keeps rubbing on the pads, no matter how many times you recallibrate them, the bores need alignment. By observing where the rotors rub the pads you may be able determine which side of the bores need to be levelled, but if not sure, let a mechanic do it for you. I filed a bit on one side of my bores and was able to eliminate the annoying brake rub. This is a trial and error procedure.
Duck Man
Comentado en los Estados Unidos el 21 de febrero de 2023
Works great -- turns out disk mounts are the Wild West!!!On a Warbird need this on the rear to fit a 160mm, on the front allows you to fit a 180mm disk.
Dan
Comentado en los Estados Unidos el 5 de julio de 2022
check to see how far your pads are engaged with the rotor
JF
Comentado en los Estados Unidos el 24 de noviembre de 2022
I'm building up a new bike and discovered that Shimano's GRX rear caliper does not include the adapter needed to use a 160mm rotor (the front caliper does include it though). For $410.00(!) this SHOULD be included with the rear brake/shifter set - I'm looking at YOU Shimano!The quality of the adapter kit is typical Shimano quality and plated the rear caliper up into perfect position for the 160mm rotor. So I got that going for me.
Productos recomendados
Mex $167.90
Mex $ 100 .00 Mex $100.00