RECIBI EL PRODUCTO EN FORMA Y TIEMPO LLEGO EN EXCELENTES CONDICIONES , YA PROBE EL SOPORTE Y ES MUY PRACTICO USARLO , PARA CELULARES Y NINTENDO SWITCH YA LOS PROBE, LO RECOMIENDO PARA QUE LO COMPREN YA SEA PARA UN REGALO Ó PARA UNO MISMO

I purchased this to hold an iPad which I use as camera 2 into Zoom when teaching guitar. It can be positioned easily and quickly and also works with an iPhone.It is well designed and sturdy and very versatile.It is attached to my computer desk and folds/swivels out of the way when not in use.It is also very easy to remove and refit so is no hassle to store away when not in use.The price is very reasonable considering the build quality.I’ll be buying another one to add a camera 3.

If feels a bit cheap but have had it now for about a year and its still holding up well. Even with the kids using it, they can be rough and careless, it has no problems. It would have been great if it was just a bit longer but still does the job.

Tengo un Smartphone rugerizado no apto para las dimensiones de este dispositivo ya que tiene un grosor de 18 mm pero aun así lo sujeta bien aunque por lo mismo, no puedo conectar su cable de carga, tambien sujeta muy bien una Nintendo switch sin los joycon

Lo uso con un s23 ultra sin problemas, se mantiene fijo y se puede acomodar muy bien a la posicion deseada.fue una muy buena compra, son de esas cosas que no sabia que las necesitaba hasta que la tuve.Me acabo de comprar la tab s9 plus y también la soporta. Con una funda muy ligera sin tapa..

No se pudo cargar el contenido.

I like to watch/listen to YouTube vids while playing a game. I hesitated for a long time to buy this and just used a tablet case with a stand instead. I finally bought this earlier this month. It holds my Fire 10 tablet without a struggle as well my Nintendo Switch when I tested it with that as well. It works great and I highly recommend it if you're on the fence about it. Its strudy, and each joint has its own screw to tighten or loose, if needed. I plan to buy a second one next month.The following 2 issues are likely a me issue in regards to how I use it, but regardless, I don't think they take away from recommending it. The first is when typing on the tablet you need to hold it with the other hand, else its awkward due to it bouncing with each tap. Again, that's a me thing and just how physics works, so I figured its worth a mention. The second issue is paint getting scraped off of it when pushing it away or pulling close, which I do a lot. Easily fixed by not tightening the screw that connects the arm to the base. I figured in case anyone might do what I did/do I'd mention so that you know where that random small spot of black specks came from that took a little too long to figure out. We all have our moments, lol.Not that it matters to anyone but me, but in regards to my picture, its not normally that close and doesn't cover my tv screen. Its like that purely for the picture.

Updated December 2023: 1st unit still holding up as good as the day it was bought. I Just bought a 2nd unit for my home, for all the original reasons stated below in the original review. These tablet arms are incredibly handy and useful, I found myself constantly moving mine around to different rooms where I needed it. Decided to buy a 2nd one (I'll probably buy a few more yet eventually).Bought this for holding an Amazon Fire HD8 Tablet and a portable 13" secondary flatpanel monitor screen holder. The product is EXACTLY as the promo images display.This review might be a bit on the long side however i'll cover several uses i've found to be really handy that nobody sofar has mentioned in their reviews.I'm very impressed by the build quality All metal frame, springs and bolts, including the whole bracket clamp.Only non metal parts are the plastic knobs ends on the tension-bolts, the spring loaded tablet clamp grip assembly, and tightening nut at the back of that clamp grip assembly, and silicon pad on the bracket clamps themselves as to not damage or leave marks the finish on any choice of furniture you chose to mount the base on, whether it be it a bedside night stand, headboard, coffee table, countertop, table, glass top table or glass-top coffee table or wall shelf; or just about anywhere else you can think of.The base bracket clamp has 2 socket mounting options to clamp onto - horizontally (ie: table ledge) or vertically (ie: headboard), and the clamp has a full minimum 1/4" to 3" maximum clearance to accommodate some very thin (glass top coffee table) and thick mounting applications like a headboard.The tablet stand is very sturdy, while priced affordably. The Tablet stand has 6 tension-bolts:- one for the clamp plate adjustment screw, a good sized thick round knob with 5 deep finger sized indentations that allow you to firmly grip and tighten the clamp to the surface/ledge/etc spot you have chosen. It doesn't matter if you have small or large hands, thin or thick fingers, or wearing gloves, you'd have no problem or issue getting a solid grip on this knob.- one on the base clamp bracket with 2 holes - one for each orientation which will secure the tablet stand, preventing from swinging to either side if you prefer or require a "fixed" placement of the arm.- three on the remaining arm hinge joints (base, middle end), which lock the 2 arm sections in the position you want them- one on at the very end that connects the end of the tablet arm with the 2 sets of short metal rods, with one of the rods ending in a ball-joint to the backplate of the tablet gripper assembly.The tablet arm comes neatly folded inside a small box, with a easy to understand set of instructions, Assembly is very minimal, and that covers both the horizontal or vertical orientation of the base bracket clamp, and the attachment of the spring loaded tablet gripper holder assembly - which is a plastic nut and a ball-joint / ball-joint socket.Setup of the tablet arm is very simple, once choosing an adequate spot/surface/ledge to tighten the base clamp onto attaching that tablet gripper assembly and inserting the tablet arm into the rod, it's merely a matter of positioning the tablet arm and tightening those tension knobs, and lastly your tablet or display device between the pair of padded grip holders.As advertised, the spring loaded tablet clamps will accommodate devices within 5 3/8" to 11" size, as the clamps extend just a little past 11".- Both clamps measure at 2 5/8" wide across.- The rubber padded lip has a full 5/8" of depth for gripping onto whatever phone, tablet or screen that will fit within the 5 3/8" to 11" measurement.- Both top and bottom lips are slotted across inside to accommodate most usb charge cables and headphone cables, The slot measures about 1 3/4" wide by 3/8" deep, should the device your using (a phone or tablet) require charging; and/or should you want to plug in your headphones- The springs in those clamps have a considerable amount of tension 'clamping force' that will keep your device/tablet/screen securely in place if it gets accidentally bumped.Testing and using the tablet arm, I use this tablet arm with 5 different devices, in several different setups:2 brands / sizes of smart phones, one of them being 'phablet' in size with a 6" screen, both phones with protective cases on. I found removing the cases was unnecessary. The phones are held in the typical portrait mode, and the usb cables I have on hand, do have enough clearance through the inner lip slot, and also able to comfortably fit 3.5mm headphone cable as well.Amazon Fire tablet HD8, in both portrait and landscape modes, the spring loaded grips extend wide enough to hold the HD8 on both long or short edges (8 1/8" x 5 5/8"), and the spring tension has enough to hold the tablet snug and firm, even while the tablet is within its case.Alternative Pc / Laptop display mount: For people who use their laptops while laying down in bed and get tired of constantly bending their neck down to look at the screen, I tested a 15" portable monitor (Amazon has a bunch in the store here - just search for 'portable monitor' ), the only caveat here is you'd need to have a hdmi + power cable extension or single usb cable long enough to reach said computer / laptop / video source and use zip-ties to fasten the cables neatly along the length of the arm to keep things tidy. That being said, this Tablet Stand is a very unique and convenient solution, allowing the person to comfortably lay back in bed and keeping their neck in a more neutral posture position. No more sore necks, and your neck will thank you.Alternatively, this Tablet Stand works great clamped to the side of the computer desk or livingroom end table to mount a portable 15" monitor for use as a secondary or third display screen when desk space / workpace is cramped, limited or simply unable to fit an extra display screen. A person could buy and use 2 of these and have a 3 monitor display spread on a desk/workspace that's only big enough for a single monitor or laptop. I've tried this and it works wonderfully in my livingroom - sitting at the end of the sofa or in the arm-chair with an end table off to the side, I'm able to use the laptop with a second screen, and have the second screen positioned exactly where I want / need it.This is also true when needing a third arm and spare hand to hold your cell phone or tablet while working in tandem with your laptop. Its a great hands-free device holder and mount.I also have a 2-in-1 convertible 11.6" sized chromebook (brand unimportant, 11.6" is a common chromebook size), that has a touch-screen and the screen lid folds a full 180 degrees to the other side / backside of the keyboard converting from laptop to 'tablet mode' . The outer dimensions of the chromebook is 8 1/8" x 11 3/4", and the tablet arm grippers does accommodate the 8 1/8" 'landscape' orientation without issue. There's enough 'lip' on those grippers, and this tablet arm is rated for up to 1500grams (1.5kg / 3.3lb), which is within the weight of the chromebook i have.The Chromebook is arguably the heaviest of the devices I tried, and once those tension knobs are tightened, there's only a slightest bit of jiggle/wobble if tapping the screen with your finger using one of those android screen styluses. The ball-joint socket at the back of the tablet gripper assembly is also quite sturdy, I'm able to tighten the nut enough so that the gripper plate is stiff and holds the position you set it to, wile at the same time still able to tilt / adjust whichever device I'm using to a comfortable viewing angle.

Parece ser frágil por el grosor de sus barillas pero si soporta el peso especificado sin doblarse

Muy buen soporte, sostiene sin problema una Tablet Samsung tab a7,el único detalle que le veo es que la pieza que sostiene la Tablet, la pieza que hace que gire, no se queda fija el peso le gana, pero se arregla con un cordón de plástico.En general el soporte esta muy bien construido, no me ha fallado me ha servido mucho para usar mi Tablet.Sin duda lo volvería a comprar.

No es muy estable, tampoco muy resistente pero eso si muy versatil

Risponde a quanto ordinato

Es perfecta, es mejor que una que había adquirido anteriormente, está se siente con más resistencia y durabilidad, la base del soporte es de metal y trae una protección para evitar maltratar la superficie en donde se colocará y tiene un buen precio que espero se mantenga