No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Ranura para tarjeta de percus
Diseño de ranura, cableado conveniente, diámetro de varios hilos se puede superponer (2P, 3P se puede superponer y combinar en 4P, 5P, 6, 7P, etc.)
Clavijas de cobre
La superficie del material de cobre está estañada, lo que desempeña eficazmente el papel de anticorrosión, antioxidación y antiobstrucción.
Carcasa ignífuga
La carcasa de plástico está hecha de material aislante, que no es fácil de quemar después de estar en fuego. Se extinguirá automáticamente después de salir de la fuente de fuego para garantizar la estabilidad del trabajo.
Embalaje exquisito
Los conectores de terminales de tornillo (2P, 3P) y un mini destornillador Phillips se colocan en una caja de almacenamiento transparente para un acceso rápido y protección.
Utilizado ampliamente en la electrónica, equipos de comunicación, instrumentos, calculadora, sistema de control automático, etc.
Uncle Ben
Comentado en Canadá el 23 de enero de 2025
Versatile.These make bare wires a thing of the past.I mount my potentiometers in the three terminals, and am able to swapin a second to a different one.These are built well, quality is there.Nice case. makes it functional.
Martin
Comentado en Canadá el 13 de mayo de 2024
Conforme à la description
Steven
Comentado en Canadá el 31 de julio de 2023
It does what it sais. Its a terminal block connector. Pins can be easily soldered. Good value for money. Although tightning the screws twists the block itself slightly. Not a big issue. Overall it seems like a decent product and will buy more if needed
Troy McFarland
Comentado en los Estados Unidos el 19 de octubre de 2022
NON STANDARD USE (but fun!)I'm a newbie guitar maker. I wanted to be able to quickly swap out pickups or capacitors. I saw other vendors selling pots with these preinstalled, so I thought I'd try it myself. The tines were just a little too thick to fit into the free-way 10 position blade switch I used, so I ended up soldering solid core wire to bridge the gap. Otherwise, they fit nearly perfectly into everything else.These work great. My only complaint is that when I stuffed multiple pre-tinned wires into a slot (most were 22 gauge, some was 24 gauge), sometimes they wouldn't stick when screwed into place. I think if I hadn't tinned them, or if they were all the same gauge, it wouldn't have been a problem. Also, the silicone coating on some of them was really thick, which made it harder to stuff other wires into the same slot. My workaround was to solder those wires together before putting into the slot, which kind of defeated the purpose of them. But, it was a great learning experience.Finally, the provided screw driver works, but you have to pay attention to the angle more than other drivers if you want it to work.
Sean Estabrooks
Comentado en Canadá el 21 de septiembre de 2022
Did the job as expected, and as a nice bonus can be used in a typical prototyping breadboard (2.54mm pitch) as well.
Productos recomendados
Mex $146.85
Mex $ 73 .00 Mex $73.00
Mex $2,651.00
Mex $ 1,086 .00 Mex $1,086.00
Mex $216.00
Mex $ 114 .00 Mex $114.00
Mex $681.29
Mex $ 306 .00 Mex $306.00
Mex $210.24
Mex $ 113 .00 Mex $113.00